Jan  1 00:00:03 blo kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Jan  1 00:00:03 blo kernel: [    0.000000] Linux version 5.10.36-v8 (valentic@cambria.valentic.net) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2021.05) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Wed Jul 21 13:20:58 PDT 2021
Jan  1 00:00:03 blo kernel: [    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2
Jan  1 00:00:03 blo kernel: [    0.000000] efi: UEFI not found.
Jan  1 00:00:03 blo kernel: [    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
Jan  1 00:00:03 blo kernel: [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Jan  1 00:00:03 blo kernel: [    0.000000] Zone ranges:
Jan  1 00:00:03 blo kernel: [    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
Jan  1 00:00:03 blo kernel: [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 blo kernel: [    0.000000]   Normal   empty
Jan  1 00:00:03 blo kernel: [    0.000000] Movable zone start for each node
Jan  1 00:00:03 blo kernel: [    0.000000] Early memory node ranges
Jan  1 00:00:03 blo kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000039bfffff]
Jan  1 00:00:03 blo kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 blo kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
Jan  1 00:00:03 blo kernel: [    0.000000] percpu: Embedded 32 pages/cpu s91224 r8192 d31656 u131072
Jan  1 00:00:03 blo kernel: [    0.000000] Detected PIPT I-cache on CPU0
Jan  1 00:00:03 blo kernel: [    0.000000] CPU features: detected: Spectre-v2
Jan  1 00:00:03 blo kernel: [    0.000000] CPU features: detected: Spectre-v4
Jan  1 00:00:03 blo kernel: [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Jan  1 00:00:03 blo kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990864
Jan  1 00:00:03 blo kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:B3:03:05 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200
Jan  1 00:00:03 blo kernel: [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Jan  1 00:00:03 blo kernel: [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan  1 00:00:03 blo kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Jan  1 00:00:03 blo kernel: [    0.000000] software IO TLB: mapped [mem 0x0000000035c00000-0x0000000039c00000] (64MB)
Jan  1 00:00:03 blo kernel: [    0.000000] Memory: 3792264K/4026368K available (11264K kernel code, 1928K rwdata, 3972K rodata, 3712K init, 1242K bss, 168568K reserved, 65536K cma-reserved)
Jan  1 00:00:03 blo kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:03 blo kernel: [    0.000000] ftrace: allocating 36633 entries in 144 pages
Jan  1 00:00:03 blo kernel: [    0.000000] ftrace: allocated 144 pages with 2 groups
Jan  1 00:00:03 blo kernel: [    0.000000] rcu: Preemptible hierarchical RCU implementation.
Jan  1 00:00:03 blo kernel: [    0.000000] rcu: 	RCU event tracing is enabled.
Jan  1 00:00:03 blo kernel: [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Jan  1 00:00:03 blo kernel: [    0.000000] 	Trampoline variant of Tasks RCU enabled.
Jan  1 00:00:03 blo kernel: [    0.000000] 	Rude variant of Tasks RCU enabled.
Jan  1 00:00:03 blo kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Jan  1 00:00:03 blo kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Jan  1 00:00:03 blo kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan  1 00:00:03 blo kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Jan  1 00:00:03 blo kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Jan  1 00:00:03 blo kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0
Jan  1 00:00:03 blo kernel: [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
Jan  1 00:00:03 blo kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
Jan  1 00:00:03 blo kernel: [    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Jan  1 00:00:03 blo kernel: [    0.000251] Console: colour dummy device 80x25
Jan  1 00:00:03 blo kernel: [    0.000772] printk: console [tty1] enabled
Jan  1 00:00:03 blo kernel: [    0.000832] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
Jan  1 00:00:03 blo kernel: [    0.000873] pid_max: default: 32768 minimum: 301
Jan  1 00:00:03 blo kernel: [    0.001021] LSM: Security Framework initializing
Jan  1 00:00:03 blo kernel: [    0.001236] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 blo kernel: [    0.001304] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 blo kernel: [    0.002649] Disabling memory control group subsystem
Jan  1 00:00:03 blo kernel: [    0.004750] rcu: Hierarchical SRCU implementation.
Jan  1 00:00:03 blo kernel: [    0.005748] EFI services will not be available.
Jan  1 00:00:03 blo kernel: [    0.006227] smp: Bringing up secondary CPUs ...
Jan  1 00:00:03 blo kernel: [    0.007169] Detected PIPT I-cache on CPU1
Jan  1 00:00:03 blo kernel: [    0.007240] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Jan  1 00:00:03 blo kernel: [    0.008358] Detected PIPT I-cache on CPU2
Jan  1 00:00:03 blo kernel: [    0.008405] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Jan  1 00:00:03 blo kernel: [    0.009455] Detected PIPT I-cache on CPU3
Jan  1 00:00:03 blo kernel: [    0.009500] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
Jan  1 00:00:03 blo kernel: [    0.009646] smp: Brought up 1 node, 4 CPUs
Jan  1 00:00:03 blo kernel: [    0.009735] SMP: Total of 4 processors activated.
Jan  1 00:00:03 blo kernel: [    0.009759] CPU features: detected: 32-bit EL0 Support
Jan  1 00:00:03 blo kernel: [    0.009781] CPU features: detected: CRC32 instructions
Jan  1 00:00:03 blo kernel: [    0.009804] CPU features: detected: 32-bit EL1 Support
Jan  1 00:00:03 blo kernel: [    0.044657] CPU: All CPU(s) started at EL2
Jan  1 00:00:03 blo kernel: [    0.044736] alternatives: patching kernel code
Jan  1 00:00:03 blo kernel: [    0.046187] devtmpfs: initialized
Jan  1 00:00:03 blo kernel: [    0.056544] Enabled cp15_barrier support
Jan  1 00:00:03 blo kernel: [    0.056605] Enabled setend support
Jan  1 00:00:03 blo kernel: [    0.056808] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan  1 00:00:03 blo kernel: [    0.056855] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 blo kernel: [    0.058743] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:03 blo kernel: [    0.059512] DMI not present or invalid.
Jan  1 00:00:03 blo kernel: [    0.059880] NET: Registered protocol family 16
Jan  1 00:00:03 blo kernel: [    0.062943] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Jan  1 00:00:03 blo kernel: [    0.063217] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Jan  1 00:00:03 blo kernel: [    0.064166] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Jan  1 00:00:03 blo kernel: [    0.064276] audit: initializing netlink subsys (disabled)
Jan  1 00:00:03 blo kernel: [    0.064637] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1
Jan  1 00:00:03 blo kernel: [    0.065125] thermal_sys: Registered thermal governor 'step_wise'
Jan  1 00:00:03 blo kernel: [    0.065561] cpuidle: using governor menu
Jan  1 00:00:03 blo kernel: [    0.065878] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Jan  1 00:00:03 blo kernel: [    0.066058] ASID allocator initialised with 65536 entries
Jan  1 00:00:03 blo kernel: [    0.066205] Serial: AMBA PL011 UART driver
Jan  1 00:00:03 blo kernel: [    0.095463] bcm2835-mbox fe00b880.mailbox: mailbox enabled
Jan  1 00:00:03 blo kernel: [    0.104314] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
Jan  1 00:00:03 blo kernel: [    0.108310] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
Jan  1 00:00:03 blo kernel: [    0.141380] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
Jan  1 00:00:03 blo kernel: [    0.145287] vgaarb: loaded
Jan  1 00:00:03 blo kernel: [    0.145690] SCSI subsystem initialized
Jan  1 00:00:03 blo kernel: [    0.145908] usbcore: registered new interface driver usbfs
Jan  1 00:00:03 blo kernel: [    0.145985] usbcore: registered new interface driver hub
Jan  1 00:00:03 blo kernel: [    0.146064] usbcore: registered new device driver usb
Jan  1 00:00:03 blo kernel: [    0.146387] usb_phy_generic phy: supply vcc not found, using dummy regulator
Jan  1 00:00:03 blo kernel: [    0.148039] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:03 blo kernel: [    1.164775] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:03 blo kernel: [    1.164886] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan  1 00:00:03 blo kernel: [    1.165061] FS-Cache: Loaded
Jan  1 00:00:03 blo kernel: [    1.165281] CacheFiles: Loaded
Jan  1 00:00:03 blo kernel: [    1.175718] NET: Registered protocol family 2
Jan  1 00:00:03 blo kernel: [    1.176624] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Jan  1 00:00:03 blo kernel: [    1.176689] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Jan  1 00:00:03 blo kernel: [    1.176991] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
Jan  1 00:00:03 blo kernel: [    1.177402] TCP: Hash tables configured (established 32768 bind 32768)
Jan  1 00:00:03 blo kernel: [    1.177621] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 blo kernel: [    1.177693] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 blo kernel: [    1.178012] NET: Registered protocol family 1
Jan  1 00:00:03 blo kernel: [    1.178861] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:03 blo kernel: [    1.178889] RPC: Registered udp transport module.
Jan  1 00:00:03 blo kernel: [    1.178910] RPC: Registered tcp transport module.
Jan  1 00:00:03 blo kernel: [    1.178930] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:03 blo kernel: [    1.178961] PCI: CLS 0 bytes, default 64
Jan  1 00:00:03 blo kernel: [    1.181229] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
Jan  1 00:00:03 blo kernel: [    1.181528] kvm [1]: IPA Size Limit: 44 bits
Jan  1 00:00:03 blo kernel: [    1.182665] kvm [1]: vgic interrupt IRQ9
Jan  1 00:00:03 blo kernel: [    1.182941] kvm [1]: Hyp mode initialized successfully
Jan  1 00:00:03 blo kernel: [    1.185034] Initialise system trusted keyrings
Jan  1 00:00:03 blo kernel: [    1.185351] workingset: timestamp_bits=46 max_order=20 bucket_order=0
Jan  1 00:00:03 blo kernel: [    1.191574] zbud: loaded
Jan  1 00:00:03 blo kernel: [    1.193255] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:03 blo kernel: [    1.193923] NFS: Registering the id_resolver key type
Jan  1 00:00:03 blo kernel: [    1.193988] Key type id_resolver registered
Jan  1 00:00:03 blo kernel: [    1.194010] Key type id_legacy registered
Jan  1 00:00:03 blo kernel: [    1.194143] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan  1 00:00:03 blo kernel: [    1.194170] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Jan  1 00:00:03 blo kernel: [    1.195258] Key type asymmetric registered
Jan  1 00:00:03 blo kernel: [    1.195285] Asymmetric key parser 'x509' registered
Jan  1 00:00:03 blo kernel: [    1.195342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Jan  1 00:00:03 blo kernel: [    1.195625] io scheduler mq-deadline registered
Jan  1 00:00:03 blo kernel: [    1.195652] io scheduler kyber registered
Jan  1 00:00:03 blo kernel: [    1.199476] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
Jan  1 00:00:03 blo kernel: [    1.199521] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
Jan  1 00:00:03 blo kernel: [    1.199607] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
Jan  1 00:00:03 blo kernel: [    1.199700] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
Jan  1 00:00:03 blo kernel: [    1.250136] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
Jan  1 00:00:03 blo kernel: [    1.250506] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
Jan  1 00:00:03 blo kernel: [    1.250538] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  1 00:00:03 blo kernel: [    1.250566] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
Jan  1 00:00:03 blo kernel: [    1.250663] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
Jan  1 00:00:03 blo kernel: [    1.250908] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 00:00:03 blo kernel: [    1.254729] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan  1 00:00:03 blo kernel: [    1.255135] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
Jan  1 00:00:03 blo kernel: [    1.255269] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
Jan  1 00:00:03 blo kernel: [    1.255702] pci 0000:01:00.0: PME# supported from D0 D3cold
Jan  1 00:00:03 blo kernel: [    1.271486] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan  1 00:00:03 blo kernel: [    1.271539] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 blo kernel: [    1.271573] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
Jan  1 00:00:03 blo kernel: [    1.271624] pci 0000:00:00.0: PCI bridge to [bus 01]
Jan  1 00:00:03 blo kernel: [    1.271656] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 blo kernel: [    1.272306] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
Jan  1 00:00:03 blo kernel: [    1.272352] bcm2708_fb: probe of soc:fb failed with error -2
Jan  1 00:00:03 blo kernel: [    1.276712] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
Jan  1 00:00:03 blo kernel: [    1.277581] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
Jan  1 00:00:03 blo kernel: [    1.279738] iproc-rng200 fe104000.rng: hwrng registered
Jan  1 00:00:03 blo kernel: [    1.280163] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jan  1 00:00:03 blo kernel: [    1.281019] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
Jan  1 00:00:03 blo kernel: [    1.281432] cacheinfo: Unable to detect cache hierarchy for CPU 0
Jan  1 00:00:03 blo kernel: [    1.291993] brd: module loaded
Jan  1 00:00:03 blo kernel: [    1.303863] loop: module loaded
Jan  1 00:00:03 blo kernel: [    1.305486] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:03 blo kernel: [    1.308675] libphy: Fixed MDIO Bus: probed
Jan  1 00:00:03 blo kernel: [    1.310214] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
Jan  1 00:00:03 blo kernel: [    1.320105] libphy: bcmgenet MII bus: probed
Jan  1 00:00:03 blo kernel: [    1.368168] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
Jan  1 00:00:03 blo kernel: [    1.369255] usbcore: registered new interface driver r8152
Jan  1 00:00:03 blo kernel: [    1.369333] usbcore: registered new interface driver lan78xx
Jan  1 00:00:03 blo kernel: [    1.369411] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:03 blo kernel: [    1.370993] pci 0000:00:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:03 blo kernel: [    1.371053] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:03 blo kernel: [    1.371176] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 blo kernel: [    1.371220] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:03 blo kernel: [    1.371900] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
Jan  1 00:00:03 blo kernel: [    1.372843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Jan  1 00:00:03 blo kernel: [    1.372877] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 blo kernel: [    1.372905] usb usb1: Product: xHCI Host Controller
Jan  1 00:00:03 blo kernel: [    1.372928] usb usb1: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 blo kernel: [    1.372950] usb usb1: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 blo kernel: [    1.373686] hub 1-0:1.0: USB hub found
Jan  1 00:00:03 blo kernel: [    1.373794] hub 1-0:1.0: 1 port detected
Jan  1 00:00:03 blo kernel: [    1.374426] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 blo kernel: [    1.374462] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
Jan  1 00:00:03 blo kernel: [    1.374500] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
Jan  1 00:00:03 blo kernel: [    1.374949] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
Jan  1 00:00:03 blo kernel: [    1.374981] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 blo kernel: [    1.375007] usb usb2: Product: xHCI Host Controller
Jan  1 00:00:03 blo kernel: [    1.375030] usb usb2: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 blo kernel: [    1.375053] usb usb2: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 blo kernel: [    1.375684] hub 2-0:1.0: USB hub found
Jan  1 00:00:03 blo kernel: [    1.375779] hub 2-0:1.0: 4 ports detected
Jan  1 00:00:03 blo kernel: [    1.377415] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:03 blo kernel: [    1.378241] usbcore: registered new interface driver uas
Jan  1 00:00:03 blo kernel: [    1.378362] usbcore: registered new interface driver usb-storage
Jan  1 00:00:03 blo kernel: [    1.378555] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:03 blo kernel: [    1.380406] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Jan  1 00:00:03 blo kernel: [    1.383633] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:03 blo kernel: [    1.383662] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:03 blo kernel: [    1.384396] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
Jan  1 00:00:03 blo kernel: [    1.384915] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:03 blo kernel: [    1.388634] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:03 blo kernel: [    1.388996] hid: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:03 blo kernel: [    1.389204] usbcore: registered new interface driver usbhid
Jan  1 00:00:03 blo kernel: [    1.389228] usbhid: USB HID core driver
Jan  1 00:00:03 blo kernel: [    1.396405] Initializing XFRM netlink socket
Jan  1 00:00:03 blo kernel: [    1.396471] NET: Registered protocol family 17
Jan  1 00:00:03 blo kernel: [    1.396622] Key type dns_resolver registered
Jan  1 00:00:03 blo kernel: [    1.397151] registered taskstats version 1
Jan  1 00:00:03 blo kernel: [    1.397187] Loading compiled-in X.509 certificates
Jan  1 00:00:03 blo kernel: [    1.397771] Key type ._fscrypt registered
Jan  1 00:00:03 blo kernel: [    1.397799] Key type .fscrypt registered
Jan  1 00:00:03 blo kernel: [    1.397820] Key type fscrypt-provisioning registered
Jan  1 00:00:03 blo kernel: [    1.408823] uart-pl011 fe201000.serial: there is not valid maps for state default
Jan  1 00:00:03 blo kernel: [    1.409087] uart-pl011 fe201000.serial: cts_event_workaround enabled
Jan  1 00:00:03 blo kernel: [    1.409186] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
Jan  1 00:00:03 blo kernel: [    1.708069] usb 1-1: new high-speed USB device number 2 using xhci_hcd
Jan  1 00:00:03 blo kernel: [    1.709510] printk: console [ttyAMA0] enabled
Jan  1 00:00:03 blo kernel: [    1.866725] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
Jan  1 00:00:03 blo kernel: [    1.877555] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default
Jan  1 00:00:03 blo kernel: [    1.880691] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:03 blo kernel: [    1.885878] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 22, base_baud = 62500000) is a 16550
Jan  1 00:00:03 blo kernel: [    1.892159] usb 1-1: Product: USB2.0 Hub
Jan  1 00:00:03 blo kernel: [    1.893873] hub 1-1:1.0: USB hub found
Jan  1 00:00:03 blo kernel: [    1.908806] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Jan  1 00:00:03 blo kernel: [    1.913744] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:03 blo kernel: [    1.922309] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jan  1 00:00:03 blo kernel: [    1.992330] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:03 blo kernel: [    1.996439] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
Jan  1 00:00:03 blo kernel: [    2.021459] usb 2-1: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
Jan  1 00:00:03 blo kernel: [    2.054143] of_cfs_init
Jan  1 00:00:03 blo kernel: [    2.059712] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
Jan  1 00:00:03 blo kernel: [    2.066264] of_cfs_init: OK
Jan  1 00:00:03 blo kernel: [    2.072790] usb 2-1: Product: USB 10/100/1000 LAN
Jan  1 00:00:03 blo kernel: [    2.072802] usb 2-1: Manufacturer: TP-LINK
Jan  1 00:00:03 blo kernel: [    2.072812] usb 2-1: SerialNumber: 000001000000
Jan  1 00:00:03 blo kernel: [    2.096634] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
Jan  1 00:00:03 blo kernel: [    2.232775] usb 2-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:03 blo kernel: [    2.240976] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 00:00:03 blo kernel: [    2.265201] random: fast init done
Jan  1 00:00:03 blo kernel: [    2.834799] uart-pl011 fe201000.serial: no DMA platform data
Jan  1 00:00:03 blo kernel: [    2.835749] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 blo kernel: [    2.847737] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 blo kernel: [    2.847950] r8152 2-1:1.0: Direct firmware load for rtl_nic/rtl8153a-3.fw failed with error -2
Jan  1 00:00:03 blo kernel: [    2.856363] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 00:00:03 blo kernel: [    2.861966] r8152 2-1:1.0: unable to load firmware patch rtl_nic/rtl8153a-3.fw (-2)
Jan  1 00:00:03 blo kernel: [    2.869214] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 blo kernel: [    2.909134] r8152 2-1:1.0 eth1: v1.12.11
Jan  1 00:00:03 blo kernel: [    2.913473] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:03 blo kernel: [    2.955306] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
Jan  1 00:00:03 blo kernel: [    2.962333] mmc1: new high speed SDIO card at address 0001
Jan  1 00:00:03 blo kernel: [    2.969146] mmcblk0: mmc0:aaaa SD64G 59.5 GiB
Jan  1 00:00:03 blo kernel: [    2.975845]  mmcblk0: p1 p2
Jan  1 00:00:03 blo kernel: [    3.011161] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Jan  1 00:00:03 blo kernel: [    3.018536] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Jan  1 00:00:03 blo kernel: [    3.040107] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd
Jan  1 00:00:03 blo kernel: [    3.152617] usb 1-1.4: New USB device found, idVendor=1546, idProduct=01a7, bcdDevice= 1.00
Jan  1 00:00:03 blo kernel: [    3.161048] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 00:00:03 blo kernel: [    3.168401] usb 1-1.4: Product: u-blox 7 - GPS/GNSS Receiver
Jan  1 00:00:03 blo kernel: [    3.174177] usb 1-1.4: Manufacturer: u-blox AG - www.u-blox.com
Jan  1 00:00:03 blo kernel: [    3.312696] EXT4-fs (mmcblk0p2): recovery complete
Jan  1 00:00:03 blo kernel: [    3.321639] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:03 blo kernel: [    3.329842] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:03 blo kernel: [    3.337586] devtmpfs: mounted
Jan  1 00:00:03 blo kernel: [    3.348756] Freeing unused kernel memory: 3712K
Jan  1 00:00:03 blo kernel: [    3.353493] Run /sbin/init as init process
Jan  1 00:00:03 blo kernel: [    3.704633] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jan  1 00:00:03 blo kernel: [    3.833481] PPP generic driver version 2.4.2
Jan  1 00:00:03 blo kernel: [    3.848154] PPP Deflate Compression module registered
Jan  1 00:00:03 blo kernel: [    3.880139] PPP BSD Compression module registered
Jan  1 00:00:03 blo sysctl: * Applying /etc/sysctl.conf ...
Jan  1 00:00:04 blo sysctl: kernel.panic = 10
Jan  1 00:00:04 blo sysctl: kernel.panic_on_oops = 1
Jan  1 00:00:04 blo sysctl: kernel.printk = 4 4 1 7
Jan  1 00:00:04 blo rsyslogd: [origin software="rsyslogd" swVersion="8.2010.0" x-pid="123" x-info="https://www.rsyslog.com"] start
Jan  1 00:00:17 blo kernel: [   17.618389] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:17 blo kernel: [   17.619764] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:17 blo kernel: [   17.619854] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:17 blo kernel: [   17.803936] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Jan  1 00:00:17 blo kernel: [   17.805793] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Jan  1 00:00:17 blo kernel: [   17.806367] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Jan  1 00:00:17 blo kernel: [   17.806849] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Jan  1 00:00:17 blo kernel: [   17.836067] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:17 blo kernel: [   17.838018] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jan  1 00:00:17 blo kernel: [   17.838043] [vc_sm_connected_init]: start
Jan  1 00:00:17 blo kernel: [   17.845665] [vc_sm_connected_init]: installed successfully
Jan  1 00:00:17 blo kernel: [   17.852140] mc: Linux media interface: v0.10
Jan  1 00:00:17 blo kernel: [   17.889539] videodev: Linux video capture interface: v2.00
Jan  1 00:00:17 blo kernel: [   17.929307] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:17 blo kernel: [   17.929486] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:17 blo kernel: [   17.931755] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:17 blo kernel: [   17.933953] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
Jan  1 00:00:17 blo kernel: [   17.937003] usbcore: registered new interface driver cdc_acm
Jan  1 00:00:17 blo kernel: [   17.937021] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 00:00:17 blo kernel: [   17.960689] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:17 blo kernel: [   17.977188] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:17 blo kernel: [   17.978204] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:17 blo kernel: [   17.987083] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Jan  1 00:00:17 blo kernel: [   17.987145] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Jan  1 00:00:17 blo kernel: [   17.990397] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Jan  1 00:00:17 blo kernel: [   17.990524] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Jan  1 00:00:17 blo kernel: [   17.990567] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Jan  1 00:00:17 blo kernel: [   17.990835] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Jan  1 00:00:17 blo kernel: [   17.991241] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Jan  1 00:00:17 blo kernel: [   17.992619] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Jan  1 00:00:17 blo kernel: [   17.992658] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Jan  1 00:00:17 blo kernel: [   17.992688] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Jan  1 00:00:17 blo kernel: [   17.992706] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Jan  1 00:00:17 blo kernel: [   17.992723] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Jan  1 00:00:17 blo kernel: [   17.992918] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Jan  1 00:00:17 blo kernel: [   17.993824] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Jan  1 00:00:17 blo kernel: [   17.993862] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Jul 13 14:46:37 blo kernel: [   17.996733] rtc-pcf8523 1-0068: registered as rtc0
Jul 13 14:46:37 blo kernel: [   17.998695] rtc-pcf8523 1-0068: setting system clock to 2026-07-13T14:46:37 UTC (1783953997)
Jul 13 14:46:37 blo kernel: [   18.017951] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jul 13 14:46:37 blo gpsd.hotplug: add /dev/ttyACM0
Jul 13 14:46:37 blo gpsdctl: gpsd_control(action=add, arg=/dev/ttyACM0)
Jul 13 14:46:37 blo gpsdctl: launching gpsd -n -F /run/gpsd.sock
Jul 13 14:46:37 blo kernel: [   18.171456] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jul 13 14:46:37 blo kernel: [   18.184881] NET: Registered protocol family 10
Jul 13 14:46:37 blo kernel: [   18.186554] Segment Routing with IPv6
Jul 13 14:46:37 blo gpsd[188]: gpsd:ERROR: can't bind to IPv6 port 2947, Cannot assign requested address
Jul 13 14:46:37 blo kernel: [   18.219154] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jul 13 14:46:37 blo kernel: [   18.228824] usbcore: registered new interface driver brcmfmac
Jul 13 14:46:37 blo kernel: [   18.406556] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jul 13 14:46:37 blo kernel: [   18.415358] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Jul 13 14:46:37 blo kernel: [   18.427162] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
Jul 13 14:46:37 blo wpa_supplicant[229]: Successfully initialized wpa_supplicant
Jul 13 14:46:37 blo kernel: [   18.835739] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Jul 13 14:46:38 blo kernel: [   19.964087] random: crng init done
Jul 13 14:46:38 blo kernel: [   19.964110] random: 7 urandom warning(s) missed due to ratelimiting
Jul 13 14:46:38 blo wpa_supplicant[232]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
Jul 13 14:46:39 blo ifplugd(eth0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jul 13 14:46:39 blo ifplugd(eth0): upping interface
Jul 13 14:46:39 blo kernel: [   21.011921] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Jul 13 14:46:39 blo ifplugd(eth0): using SIOCETHTOOL detection mode
Jul 13 14:46:39 blo ifplugd(eth0): interface exists
Jul 13 14:46:39 blo ifplugd(eth0): link is down
Jul 13 14:46:39 blo kernel: [   21.012455] bcmgenet fd580000.ethernet eth0: Link is Down
Jul 13 14:46:39 blo ifplugd(wlan0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jul 13 14:46:39 blo ifplugd(wlan0): using wireless extension detection mode
Jul 13 14:46:39 blo ifplugd(wlan0): interface exists
Jul 13 14:46:39 blo ifplugd(wlan0): link is down
Jul 13 14:46:39 blo ifplugd(eth1): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jul 13 14:46:39 blo ifplugd(eth1): using SIOCETHTOOL detection mode
Jul 13 14:46:39 blo ifplugd(eth1): interface exists
Jul 13 14:46:39 blo ifplugd(eth1): link is down
Jul 13 14:46:39 blo chronyd[322]: chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC -PRIVDROP -SCFILTER -SIGND +ASYNCDNS -NTS -SECHASH +IPV6 -DEBUG)
Jul 13 14:46:39 blo gpsd[326]: gpsd:ERROR: can't bind to IPv4 port 2947, Address already in use
Jul 13 14:46:39 blo gpsd[326]: gpsd:ERROR: maybe gpsd is already running!  Or systemd has the port?
Jul 13 14:46:39 blo sshd[336]: Server listening on 0.0.0.0 port 22.
Jul 13 14:46:39 blo sshd[336]: Server listening on :: port 22.
Jul 13 14:46:39 blo rpc.statd[349]: Version 2.3.3 starting
Jul 13 14:46:39 blo sm-notify[350]: Version 2.3.3 starting
Jul 13 14:46:39 blo rpc.statd[349]: Initializing NSM state
Jul 13 14:46:39 blo rpc.statd[349]: Running as root.  chown /run/nfs to choose different user
Jul 13 14:46:39 blo kernel: [   21.495750] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jul 13 14:46:41 blo kernel: [   22.634909] NFSD: Using UMH upcall client tracking operations.
Jul 13 14:46:41 blo kernel: [   22.634934] NFSD: starting 90-second grace period (net f0000081)
Jul 13 14:46:41 blo rpc.mountd[364]: Version 2.3.3 starting
Jul 13 14:46:41 blo su: + none root:news
Jul 13 14:46:43 blo ifplugd(eth0): link is up
Jul 13 14:46:43 blo ifplugd(eth0): executing '/etc/ifplugd/ifplugd.action eth0 up'
Jul 13 14:46:43 blo kernel: [   25.092355] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Jul 13 14:46:43 blo kernel: [   25.092416] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jul 13 14:46:43 blo udhcpc[451]: started, v1.33.0
Jul 13 14:46:43 blo udhcpc[451]: sending discover
Jul 13 14:46:43 blo : starting pid 463, tty '/dev/console': '/sbin/getty -L  console 0 vt100 '
Jul 13 14:46:43 blo : starting pid 464, tty '/dev/tty1': '/sbin/getty -L  tty1 0 vt100 '
Jul 13 14:46:46 blo udhcpc[451]: sending discover
Jul 13 14:46:49 blo udhcpc[451]: sending discover
Jul 13 14:46:52 blo udhcpc[451]: no lease, forking to background
Jul 13 14:46:52 blo ifplugd(eth0): exit code: 0
Jul 13 14:47:09 blo ifplugd(eth1): link is up
Jul 13 14:47:09 blo ifplugd(eth1): executing '/etc/ifplugd/ifplugd.action eth1 up'
Jul 13 14:47:09 blo kernel: [   50.786315] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jul 13 14:47:09 blo kernel: [   50.786937] r8152 2-1:1.0 eth1: carrier on
Jul 13 14:47:09 blo ifplugd(eth1): exit code: 0
Jul 13 14:47:12 blo udhcpc[502]: sending discover
Jul 13 14:47:16 blo udhcpc[502]: sending discover
Jul 13 14:47:18 blo udhcpc[502]: sending discover
Jul 13 14:47:35 blo kernel: [   77.180676] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Jul 13 14:47:42 blo udhcpc[502]: sending discover
Jul 13 14:47:42 blo chronyd[322]: Selected source GPS
Jul 13 14:47:44 blo udhcpc[502]: sending discover
Jul 13 14:47:47 blo udhcpc[502]: sending discover
Jul 13 14:48:11 blo udhcpc[502]: sending discover
Jul 13 14:48:14 blo udhcpc[502]: sending discover
Jul 13 14:48:17 blo udhcpc[502]: sending discover
Jul 13 14:48:40 blo udhcpc[502]: sending discover
Jul 13 14:48:42 blo udhcpc[502]: sending discover
Jul 13 14:48:46 blo udhcpc[502]: sending discover
Jul 13 14:49:08 blo udhcpc[502]: sending discover
Jul 13 14:49:12 blo udhcpc[502]: sending discover
Jul 13 14:49:14 blo udhcpc[502]: sending discover
Jul 13 14:49:38 blo udhcpc[502]: sending discover
Jul 13 14:49:40 blo udhcpc[502]: sending discover
Jul 13 14:49:43 blo udhcpc[502]: sending discover
Jul 13 14:50:06 blo udhcpc[502]: sending discover
Jul 13 14:50:09 blo udhcpc[502]: sending discover
Jul 13 14:50:12 blo udhcpc[502]: sending discover
Jul 13 14:50:35 blo udhcpc[502]: sending discover
Jul 13 14:50:38 blo udhcpc[502]: sending discover
Jul 13 14:50:41 blo udhcpc[502]: sending discover
Jul 13 14:51:05 blo udhcpc[502]: sending discover
Jul 13 14:51:08 blo udhcpc[502]: sending discover
Jul 13 14:51:11 blo udhcpc[502]: sending discover
Jul 13 14:51:34 blo udhcpc[502]: sending discover
Jul 13 14:51:37 blo udhcpc[502]: sending discover
Jul 13 14:51:40 blo udhcpc[502]: sending discover
Jul 13 14:52:03 blo udhcpc[502]: sending discover
Jul 13 14:52:06 blo udhcpc[502]: sending discover
Jul 13 14:52:09 blo udhcpc[502]: sending discover
Jul 13 14:52:32 blo udhcpc[502]: sending discover
Jul 13 14:52:35 blo udhcpc[502]: sending discover
Jul 13 14:52:38 blo udhcpc[502]: sending discover
Jul 13 14:53:01 blo udhcpc[502]: sending discover
Jul 13 14:53:04 blo udhcpc[502]: sending discover
Jul 13 14:53:07 blo udhcpc[502]: sending discover
Jul 13 14:53:30 blo udhcpc[502]: sending discover
Jul 13 14:53:33 blo udhcpc[502]: sending discover
Jul 13 14:53:36 blo udhcpc[502]: sending discover
Jul 13 14:53:59 blo udhcpc[502]: sending discover
Jul 13 14:54:02 blo udhcpc[502]: sending discover
Jul 13 14:54:05 blo udhcpc[502]: sending discover
Jul 13 14:54:29 blo udhcpc[502]: sending discover
Jul 13 14:54:31 blo udhcpc[502]: sending discover
Jul 13 14:54:34 blo udhcpc[502]: sending discover
Jul 13 14:54:58 blo udhcpc[502]: sending discover
Jul 13 14:55:01 blo udhcpc[502]: sending discover
Jul 13 14:55:04 blo udhcpc[502]: sending discover
Jul 13 14:55:26 blo udhcpc[502]: sending discover
Jul 13 14:55:30 blo udhcpc[502]: sending discover
Jul 13 14:55:33 blo udhcpc[502]: sending discover
Jul 13 14:55:56 blo udhcpc[502]: sending discover
Jul 13 14:55:58 blo udhcpc[502]: sending discover
Jul 13 14:56:02 blo udhcpc[502]: sending discover
Jul 13 14:56:24 blo udhcpc[502]: sending discover
Jul 13 14:56:27 blo udhcpc[502]: sending discover
Jul 13 14:56:31 blo udhcpc[502]: sending discover
Jul 13 14:56:53 blo udhcpc[502]: sending discover
Jul 13 14:56:56 blo udhcpc[502]: sending discover
Jul 13 14:57:00 blo udhcpc[502]: sending discover
Jul 13 14:57:23 blo udhcpc[502]: sending discover
Jul 13 14:57:26 blo udhcpc[502]: sending discover
Jul 13 14:57:28 blo udhcpc[502]: sending discover
Jul 13 14:57:51 blo udhcpc[502]: sending discover
Jul 13 14:57:54 blo udhcpc[502]: sending discover
Jul 13 14:57:57 blo udhcpc[502]: sending discover
Jul 13 14:58:20 blo udhcpc[502]: sending discover
Jul 13 14:58:23 blo udhcpc[502]: sending discover
Jul 13 14:58:26 blo udhcpc[502]: sending discover
Jul 13 14:58:49 blo udhcpc[502]: sending discover
Jul 13 14:58:52 blo udhcpc[502]: sending discover
Jul 13 14:58:55 blo udhcpc[502]: sending discover
Jul 13 14:59:18 blo udhcpc[502]: sending discover
Jul 13 14:59:21 blo udhcpc[502]: sending discover
Jul 13 14:59:24 blo udhcpc[502]: sending discover
Jul 13 14:59:47 blo udhcpc[502]: sending discover
Jul 13 14:59:50 blo udhcpc[502]: sending discover
Jul 13 14:59:53 blo udhcpc[502]: sending discover
Jul 13 15:00:01 blo exchange-watchdog: Found stale exchange flag
Jul 13 15:00:01 blo relay-watchdog: Found stale exchange flag
Jul 13 15:00:01 blo exchange-watchdog: Rebooting system
Jul 13 15:00:01 blo relay-watchdog: Rebooting router
Jul 13 15:00:01 blo : starting pid 1429, tty '': '/etc/init.d/rcK'
Jul 13 15:00:16 blo su: + none root:news
Jul 13 15:00:17 blo udhcpc[502]: sending discover
Jul 13 15:00:20 blo udhcpc[502]: sending discover
Jul 13 15:00:23 blo udhcpc[502]: sending discover
Jul 13 15:00:41 blo rpc.mountd[364]: Caught signal 15, un-registering and exiting.
Jul 13 15:00:41 blo sshd[336]: Received signal 15; terminating.
Jul 13 15:00:41 blo chronyd[322]: chronyd exiting
Jul 13 15:00:41 blo ifplugd(eth0): exiting
Jul 13 15:00:41 blo ifplugd(wlan0): exiting
Jul 13 15:00:41 blo ifplugd(eth1): exiting
Jul 13 15:00:43 blo wpa_supplicant[232]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Jul 13 15:00:43 blo wpa_supplicant[232]: p2p-dev-wlan0: CTRL-EVENT-TERMINATING 
Jul 13 15:00:43 blo wpa_supplicant[232]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
