Jan  1 00:00:03 lao kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Jan  1 00:00:03 lao kernel: [    0.000000] Linux version 5.10.36-v8 (valentic@cambria.valentic.net) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot v1.3-5-g4eec412) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Tue Aug 3 13:28:19 PDT 2021
Jan  1 00:00:03 lao kernel: [    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2
Jan  1 00:00:03 lao kernel: [    0.000000] efi: UEFI not found.
Jan  1 00:00:03 lao kernel: [    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
Jan  1 00:00:03 lao kernel: [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Jan  1 00:00:03 lao kernel: [    0.000000] Zone ranges:
Jan  1 00:00:03 lao kernel: [    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
Jan  1 00:00:03 lao kernel: [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 lao kernel: [    0.000000]   Normal   empty
Jan  1 00:00:03 lao kernel: [    0.000000] Movable zone start for each node
Jan  1 00:00:03 lao kernel: [    0.000000] Early memory node ranges
Jan  1 00:00:03 lao kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000039bfffff]
Jan  1 00:00:03 lao kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 lao kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
Jan  1 00:00:03 lao kernel: [    0.000000] percpu: Embedded 32 pages/cpu s91224 r8192 d31656 u131072
Jan  1 00:00:03 lao kernel: [    0.000000] Detected PIPT I-cache on CPU0
Jan  1 00:00:03 lao kernel: [    0.000000] CPU features: detected: Spectre-v2
Jan  1 00:00:03 lao kernel: [    0.000000] CPU features: detected: Spectre-v4
Jan  1 00:00:03 lao kernel: [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Jan  1 00:00:03 lao kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990864
Jan  1 00:00:03 lao kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:74:21:20 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200
Jan  1 00:00:03 lao kernel: [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Jan  1 00:00:03 lao kernel: [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan  1 00:00:03 lao kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Jan  1 00:00:03 lao kernel: [    0.000000] software IO TLB: mapped [mem 0x0000000035c00000-0x0000000039c00000] (64MB)
Jan  1 00:00:03 lao kernel: [    0.000000] Memory: 3792268K/4026368K available (11264K kernel code, 1928K rwdata, 3972K rodata, 3712K init, 1242K bss, 168564K reserved, 65536K cma-reserved)
Jan  1 00:00:03 lao kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:03 lao kernel: [    0.000000] ftrace: allocating 36633 entries in 144 pages
Jan  1 00:00:03 lao kernel: [    0.000000] ftrace: allocated 144 pages with 2 groups
Jan  1 00:00:03 lao kernel: [    0.000000] rcu: Preemptible hierarchical RCU implementation.
Jan  1 00:00:03 lao kernel: [    0.000000] rcu: 	RCU event tracing is enabled.
Jan  1 00:00:03 lao kernel: [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Jan  1 00:00:03 lao kernel: [    0.000000] 	Trampoline variant of Tasks RCU enabled.
Jan  1 00:00:03 lao kernel: [    0.000000] 	Rude variant of Tasks RCU enabled.
Jan  1 00:00:03 lao kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Jan  1 00:00:03 lao kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Jan  1 00:00:03 lao kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan  1 00:00:03 lao kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Jan  1 00:00:03 lao kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Jan  1 00:00:03 lao kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0
Jan  1 00:00:03 lao kernel: [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
Jan  1 00:00:03 lao kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
Jan  1 00:00:03 lao kernel: [    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Jan  1 00:00:03 lao kernel: [    0.000254] Console: colour dummy device 80x25
Jan  1 00:00:03 lao kernel: [    0.000778] printk: console [tty1] enabled
Jan  1 00:00:03 lao kernel: [    0.000835] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
Jan  1 00:00:03 lao kernel: [    0.000877] pid_max: default: 32768 minimum: 301
Jan  1 00:00:03 lao kernel: [    0.001029] LSM: Security Framework initializing
Jan  1 00:00:03 lao kernel: [    0.001263] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 lao kernel: [    0.001340] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 lao kernel: [    0.002725] Disabling memory control group subsystem
Jan  1 00:00:03 lao kernel: [    0.004936] rcu: Hierarchical SRCU implementation.
Jan  1 00:00:03 lao kernel: [    0.005953] EFI services will not be available.
Jan  1 00:00:03 lao kernel: [    0.006457] smp: Bringing up secondary CPUs ...
Jan  1 00:00:03 lao kernel: [    0.007430] Detected PIPT I-cache on CPU1
Jan  1 00:00:03 lao kernel: [    0.007506] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Jan  1 00:00:03 lao kernel: [    0.008666] Detected PIPT I-cache on CPU2
Jan  1 00:00:03 lao kernel: [    0.008713] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Jan  1 00:00:03 lao kernel: [    0.009791] Detected PIPT I-cache on CPU3
Jan  1 00:00:03 lao kernel: [    0.009836] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
Jan  1 00:00:03 lao kernel: [    0.009984] smp: Brought up 1 node, 4 CPUs
Jan  1 00:00:03 lao kernel: [    0.010073] SMP: Total of 4 processors activated.
Jan  1 00:00:03 lao kernel: [    0.010097] CPU features: detected: 32-bit EL0 Support
Jan  1 00:00:03 lao kernel: [    0.010120] CPU features: detected: CRC32 instructions
Jan  1 00:00:03 lao kernel: [    0.010143] CPU features: detected: 32-bit EL1 Support
Jan  1 00:00:03 lao kernel: [    0.045377] CPU: All CPU(s) started at EL2
Jan  1 00:00:03 lao kernel: [    0.045459] alternatives: patching kernel code
Jan  1 00:00:03 lao kernel: [    0.046998] devtmpfs: initialized
Jan  1 00:00:03 lao kernel: [    0.057418] Enabled cp15_barrier support
Jan  1 00:00:03 lao kernel: [    0.057482] Enabled setend support
Jan  1 00:00:03 lao kernel: [    0.057691] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan  1 00:00:03 lao kernel: [    0.057738] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 lao kernel: [    0.059672] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:03 lao kernel: [    0.060532] DMI not present or invalid.
Jan  1 00:00:03 lao kernel: [    0.060909] NET: Registered protocol family 16
Jan  1 00:00:03 lao kernel: [    0.063962] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Jan  1 00:00:03 lao kernel: [    0.064270] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Jan  1 00:00:03 lao kernel: [    0.065205] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Jan  1 00:00:03 lao kernel: [    0.065315] audit: initializing netlink subsys (disabled)
Jan  1 00:00:03 lao kernel: [    0.065695] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1
Jan  1 00:00:03 lao kernel: [    0.066185] thermal_sys: Registered thermal governor 'step_wise'
Jan  1 00:00:03 lao kernel: [    0.066633] cpuidle: using governor menu
Jan  1 00:00:03 lao kernel: [    0.066954] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Jan  1 00:00:03 lao kernel: [    0.067137] ASID allocator initialised with 65536 entries
Jan  1 00:00:03 lao kernel: [    0.067283] Serial: AMBA PL011 UART driver
Jan  1 00:00:03 lao kernel: [    0.095710] bcm2835-mbox fe00b880.mailbox: mailbox enabled
Jan  1 00:00:03 lao kernel: [    0.104373] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
Jan  1 00:00:03 lao kernel: [    0.108367] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
Jan  1 00:00:03 lao kernel: [    0.141972] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
Jan  1 00:00:03 lao kernel: [    0.145887] vgaarb: loaded
Jan  1 00:00:03 lao kernel: [    0.146312] SCSI subsystem initialized
Jan  1 00:00:03 lao kernel: [    0.146534] usbcore: registered new interface driver usbfs
Jan  1 00:00:03 lao kernel: [    0.146610] usbcore: registered new interface driver hub
Jan  1 00:00:03 lao kernel: [    0.146688] usbcore: registered new device driver usb
Jan  1 00:00:03 lao kernel: [    0.147009] usb_phy_generic phy: supply vcc not found, using dummy regulator
Jan  1 00:00:03 lao kernel: [    0.148786] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:03 lao kernel: [    1.166566] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:03 lao kernel: [    1.166684] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan  1 00:00:03 lao kernel: [    1.166857] FS-Cache: Loaded
Jan  1 00:00:03 lao kernel: [    1.167101] CacheFiles: Loaded
Jan  1 00:00:03 lao kernel: [    1.177505] NET: Registered protocol family 2
Jan  1 00:00:03 lao kernel: [    1.178684] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Jan  1 00:00:03 lao kernel: [    1.178756] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Jan  1 00:00:03 lao kernel: [    1.178991] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
Jan  1 00:00:03 lao kernel: [    1.179413] TCP: Hash tables configured (established 32768 bind 32768)
Jan  1 00:00:03 lao kernel: [    1.179648] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 lao kernel: [    1.179735] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 lao kernel: [    1.180077] NET: Registered protocol family 1
Jan  1 00:00:03 lao kernel: [    1.181002] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:03 lao kernel: [    1.181032] RPC: Registered udp transport module.
Jan  1 00:00:03 lao kernel: [    1.181053] RPC: Registered tcp transport module.
Jan  1 00:00:03 lao kernel: [    1.181073] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:03 lao kernel: [    1.181105] PCI: CLS 0 bytes, default 64
Jan  1 00:00:03 lao kernel: [    1.183357] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
Jan  1 00:00:03 lao kernel: [    1.183650] kvm [1]: IPA Size Limit: 44 bits
Jan  1 00:00:03 lao kernel: [    1.184859] kvm [1]: vgic interrupt IRQ9
Jan  1 00:00:03 lao kernel: [    1.185150] kvm [1]: Hyp mode initialized successfully
Jan  1 00:00:03 lao kernel: [    1.187285] Initialise system trusted keyrings
Jan  1 00:00:03 lao kernel: [    1.187634] workingset: timestamp_bits=46 max_order=20 bucket_order=0
Jan  1 00:00:03 lao kernel: [    1.193840] zbud: loaded
Jan  1 00:00:03 lao kernel: [    1.195558] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:03 lao kernel: [    1.196214] NFS: Registering the id_resolver key type
Jan  1 00:00:03 lao kernel: [    1.196266] Key type id_resolver registered
Jan  1 00:00:03 lao kernel: [    1.196288] Key type id_legacy registered
Jan  1 00:00:03 lao kernel: [    1.196412] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan  1 00:00:03 lao kernel: [    1.196439] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Jan  1 00:00:03 lao kernel: [    1.197616] Key type asymmetric registered
Jan  1 00:00:03 lao kernel: [    1.197644] Asymmetric key parser 'x509' registered
Jan  1 00:00:03 lao kernel: [    1.197701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Jan  1 00:00:03 lao kernel: [    1.197954] io scheduler mq-deadline registered
Jan  1 00:00:03 lao kernel: [    1.197980] io scheduler kyber registered
Jan  1 00:00:03 lao kernel: [    1.202136] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
Jan  1 00:00:03 lao kernel: [    1.202183] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
Jan  1 00:00:03 lao kernel: [    1.202269] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
Jan  1 00:00:03 lao kernel: [    1.202363] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
Jan  1 00:00:03 lao kernel: [    1.250881] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
Jan  1 00:00:03 lao kernel: [    1.251257] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
Jan  1 00:00:03 lao kernel: [    1.251289] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  1 00:00:03 lao kernel: [    1.251325] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
Jan  1 00:00:03 lao kernel: [    1.251426] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
Jan  1 00:00:03 lao kernel: [    1.251677] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 00:00:03 lao kernel: [    1.255286] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan  1 00:00:03 lao kernel: [    1.255583] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
Jan  1 00:00:03 lao kernel: [    1.255662] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
Jan  1 00:00:03 lao kernel: [    1.255918] pci 0000:01:00.0: PME# supported from D0 D3cold
Jan  1 00:00:03 lao kernel: [    1.259361] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan  1 00:00:03 lao kernel: [    1.259416] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 lao kernel: [    1.259449] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
Jan  1 00:00:03 lao kernel: [    1.259501] pci 0000:00:00.0: PCI bridge to [bus 01]
Jan  1 00:00:03 lao kernel: [    1.259534] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 lao kernel: [    1.260209] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
Jan  1 00:00:03 lao kernel: [    1.260255] bcm2708_fb: probe of soc:fb failed with error -2
Jan  1 00:00:03 lao kernel: [    1.267366] iproc-rng200 fe104000.rng: hwrng registered
Jan  1 00:00:03 lao kernel: [    1.267716] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jan  1 00:00:03 lao kernel: [    1.268592] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
Jan  1 00:00:03 lao kernel: [    1.269090] cacheinfo: Unable to detect cache hierarchy for CPU 0
Jan  1 00:00:03 lao kernel: [    1.280222] brd: module loaded
Jan  1 00:00:03 lao kernel: [    1.292468] loop: module loaded
Jan  1 00:00:03 lao kernel: [    1.294148] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:03 lao kernel: [    1.297327] libphy: Fixed MDIO Bus: probed
Jan  1 00:00:03 lao kernel: [    1.298850] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
Jan  1 00:00:03 lao kernel: [    1.308849] libphy: bcmgenet MII bus: probed
Jan  1 00:00:03 lao kernel: [    1.356919] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
Jan  1 00:00:03 lao kernel: [    1.358011] usbcore: registered new interface driver r8152
Jan  1 00:00:03 lao kernel: [    1.358090] usbcore: registered new interface driver lan78xx
Jan  1 00:00:03 lao kernel: [    1.358167] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:03 lao kernel: [    1.359789] pci 0000:00:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:03 lao kernel: [    1.359851] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:03 lao kernel: [    1.359966] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 lao kernel: [    1.360019] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:03 lao kernel: [    1.360798] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
Jan  1 00:00:03 lao kernel: [    1.361722] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Jan  1 00:00:03 lao kernel: [    1.361755] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 lao kernel: [    1.361781] usb usb1: Product: xHCI Host Controller
Jan  1 00:00:03 lao kernel: [    1.361804] usb usb1: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 lao kernel: [    1.361827] usb usb1: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 lao kernel: [    1.362564] hub 1-0:1.0: USB hub found
Jan  1 00:00:03 lao kernel: [    1.362642] hub 1-0:1.0: 1 port detected
Jan  1 00:00:03 lao kernel: [    1.363215] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 lao kernel: [    1.363249] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
Jan  1 00:00:03 lao kernel: [    1.363287] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
Jan  1 00:00:03 lao kernel: [    1.363668] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
Jan  1 00:00:03 lao kernel: [    1.363698] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 lao kernel: [    1.363724] usb usb2: Product: xHCI Host Controller
Jan  1 00:00:03 lao kernel: [    1.363746] usb usb2: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 lao kernel: [    1.363769] usb usb2: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 lao kernel: [    1.364416] hub 2-0:1.0: USB hub found
Jan  1 00:00:03 lao kernel: [    1.364495] hub 2-0:1.0: 4 ports detected
Jan  1 00:00:03 lao kernel: [    1.365987] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:03 lao kernel: [    1.366811] usbcore: registered new interface driver uas
Jan  1 00:00:03 lao kernel: [    1.366921] usbcore: registered new interface driver usb-storage
Jan  1 00:00:03 lao kernel: [    1.367130] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:03 lao kernel: [    1.368993] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Jan  1 00:00:03 lao kernel: [    1.372148] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:03 lao kernel: [    1.372178] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:03 lao kernel: [    1.372869] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
Jan  1 00:00:03 lao kernel: [    1.373387] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:03 lao kernel: [    1.377251] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:03 lao kernel: [    1.377585] hid: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:03 lao kernel: [    1.377793] usbcore: registered new interface driver usbhid
Jan  1 00:00:03 lao kernel: [    1.377817] usbhid: USB HID core driver
Jan  1 00:00:03 lao kernel: [    1.385510] Initializing XFRM netlink socket
Jan  1 00:00:03 lao kernel: [    1.385575] NET: Registered protocol family 17
Jan  1 00:00:03 lao kernel: [    1.385695] Key type dns_resolver registered
Jan  1 00:00:03 lao kernel: [    1.386259] registered taskstats version 1
Jan  1 00:00:03 lao kernel: [    1.386298] Loading compiled-in X.509 certificates
Jan  1 00:00:03 lao kernel: [    1.386862] Key type ._fscrypt registered
Jan  1 00:00:03 lao kernel: [    1.386889] Key type .fscrypt registered
Jan  1 00:00:03 lao kernel: [    1.386909] Key type fscrypt-provisioning registered
Jan  1 00:00:03 lao kernel: [    1.398203] uart-pl011 fe201000.serial: there is not valid maps for state default
Jan  1 00:00:03 lao kernel: [    1.398511] uart-pl011 fe201000.serial: cts_event_workaround enabled
Jan  1 00:00:03 lao kernel: [    1.398634] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
Jan  1 00:00:03 lao kernel: [    2.672655] printk: console [ttyAMA0] enabled
Jan  1 00:00:03 lao kernel: [    2.685038] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Jan  1 00:00:03 lao kernel: [    2.693268] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jan  1 00:00:03 lao kernel: [    2.699310] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
Jan  1 00:00:03 lao kernel: [    2.734977] of_cfs_init
Jan  1 00:00:03 lao kernel: [    2.737600] of_cfs_init: OK
Jan  1 00:00:03 lao kernel: [    2.741706] uart-pl011 fe201000.serial: no DMA platform data
Jan  1 00:00:03 lao kernel: [    2.755594] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 00:00:03 lao kernel: [    2.762956] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 lao kernel: [    2.772237] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 lao kernel: [    2.780360] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
Jan  1 00:00:03 lao kernel: [    2.791589] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:03 lao kernel: [    2.793975] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 00:00:03 lao kernel: [    2.808569] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 lao kernel: [    2.855664] random: fast init done
Jan  1 00:00:03 lao kernel: [    2.893992] mmc1: new high speed SDIO card at address 0001
Jan  1 00:00:03 lao kernel: [    2.916809] usb 1-1: new high-speed USB device number 2 using xhci_hcd
Jan  1 00:00:03 lao kernel: [    2.925550] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
Jan  1 00:00:03 lao kernel: [    2.933039] mmcblk0: mmc0:aaaa SD64G 59.5 GiB
Jan  1 00:00:03 lao kernel: [    2.939846]  mmcblk0: p1 p2
Jan  1 00:00:03 lao kernel: [    2.968768] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:03 lao kernel: [    2.977197] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:03 lao kernel: [    2.984978] devtmpfs: mounted
Jan  1 00:00:03 lao kernel: [    2.996895] Freeing unused kernel memory: 3712K
Jan  1 00:00:03 lao kernel: [    3.001631] Run /sbin/init as init process
Jan  1 00:00:03 lao kernel: [    3.074936] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
Jan  1 00:00:03 lao kernel: [    3.083190] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:03 lao kernel: [    3.090363] usb 1-1: Product: USB2.0 Hub
Jan  1 00:00:03 lao kernel: [    3.096201] hub 1-1:1.0: USB hub found
Jan  1 00:00:03 lao kernel: [    3.100240] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:03 lao kernel: [    3.368160] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jan  1 00:00:03 lao kernel: [    3.400830] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
Jan  1 00:00:03 lao kernel: [    3.497284] PPP generic driver version 2.4.2
Jan  1 00:00:03 lao kernel: [    3.505365] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
Jan  1 00:00:03 lao kernel: [    3.513876] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:03 lao kernel: [    3.514073] PPP Deflate Compression module registered
Jan  1 00:00:03 lao kernel: [    3.521244] usb 1-1.1: Product: USB 2.0 Hub [MTT]
Jan  1 00:00:03 lao kernel: [    3.522705] hub 1-1.1:1.0: USB hub found
Jan  1 00:00:03 lao kernel: [    3.535147] hub 1-1.1:1.0: 4 ports detected
Jan  1 00:00:03 lao kernel: [    3.561324] PPP BSD Compression module registered
Jan  1 00:00:03 lao kernel: [    3.628874] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
Jan  1 00:00:03 lao sysctl: * Applying /etc/sysctl.conf ...
Jan  1 00:00:03 lao sysctl: kernel.panic = 10
Jan  1 00:00:03 lao sysctl: kernel.panic_on_oops = 1
Jan  1 00:00:03 lao sysctl: kernel.printk = 4 4 1 7
Jan  1 00:00:03 lao kernel: [    3.741987] usb 1-1.3: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
Jan  1 00:00:03 lao kernel: [    3.742012] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6
Jan  1 00:00:03 lao kernel: [    3.742027] usb 1-1.3: Product: USB 10/100/1000 LAN
Jan  1 00:00:03 lao kernel: [    3.742040] usb 1-1.3: Manufacturer: TP-Link
Jan  1 00:00:03 lao kernel: [    3.742053] usb 1-1.3: SerialNumber: 000001000000
Jan  1 00:00:03 lao kernel: [    3.824852] usb 1-1.4: new full-speed USB device number 5 using xhci_hcd
Jan  1 00:00:03 lao kernel: [    3.929320] usb 1-1.4: New USB device found, idVendor=1546, idProduct=01a7, bcdDevice= 1.00
Jan  1 00:00:03 lao kernel: [    3.929343] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 00:00:03 lao kernel: [    3.929357] usb 1-1.4: Product: u-blox 7 - GPS/GNSS Receiver
Jan  1 00:00:03 lao kernel: [    3.929371] usb 1-1.4: Manufacturer: u-blox AG - www.u-blox.com
Jan  1 00:00:04 lao kernel: [    4.005427] usb 1-1.3: reset high-speed USB device number 4 using xhci_hcd
Jan  1 00:00:04 lao kernel: [    4.111913] r8152 1-1.3:1.0: Direct firmware load for rtl_nic/rtl8153a-3.fw failed with error -2
Jan  1 00:00:04 lao kernel: [    4.111942] r8152 1-1.3:1.0: unable to load firmware patch rtl_nic/rtl8153a-3.fw (-2)
Jan  1 00:00:04 lao kernel: [    4.145819] r8152 1-1.3:1.0 eth1: v1.12.11
Jan  1 00:00:04 lao rsyslogd: [origin software="rsyslogd" swVersion="8.2010.0" x-pid="121" x-info="https://www.rsyslog.com"] start
Jan  1 00:00:07 lao kernel: [    7.410983] random: crng init done
Jan  1 00:00:07 lao kernel: [    7.939464] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Jan  1 00:00:07 lao kernel: [    7.940038] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Jan  1 00:00:07 lao kernel: [    7.940538] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Jan  1 00:00:07 lao kernel: [    7.941171] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Jan  1 00:00:07 lao kernel: [    7.966082] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:07 lao kernel: [    7.967757] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jan  1 00:00:07 lao kernel: [    7.967784] [vc_sm_connected_init]: start
Jan  1 00:00:07 lao kernel: [    7.968675] [vc_sm_connected_init]: installed successfully
Jan  1 00:00:07 lao kernel: [    7.980110] mc: Linux media interface: v0.10
Jan  1 00:00:08 lao kernel: [    8.014800] videodev: Linux video capture interface: v2.00
Jan  1 00:00:08 lao kernel: [    8.060691] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:08 lao kernel: [    8.061215] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:08 lao kernel: [    8.068387] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:08 lao kernel: [    8.075537] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:08 lao kernel: [    8.077590] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:08 lao kernel: [    8.078703] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
Jan  1 00:00:08 lao kernel: [    8.083086] usbcore: registered new interface driver cdc_acm
Jan  1 00:00:08 lao kernel: [    8.083107] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 00:00:08 lao kernel: [    8.091113] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Jan  1 00:00:08 lao kernel: [    8.091167] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Jan  1 00:00:08 lao kernel: [    8.092551] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Jan  1 00:00:08 lao kernel: [    8.104500] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Jan  1 00:00:08 lao kernel: [    8.104512] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Jan  1 00:00:08 lao kernel: [    8.104569] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Jan  1 00:00:08 lao kernel: [    8.105459] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Jan  1 00:00:08 lao kernel: [    8.107407] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Jan  1 00:00:08 lao kernel: [    8.107445] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Jan  1 00:00:08 lao kernel: [    8.107466] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Jan  1 00:00:08 lao kernel: [    8.107498] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Jan  1 00:00:08 lao kernel: [    8.107515] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Jan  1 00:00:08 lao kernel: [    8.107724] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Jan  1 00:00:08 lao kernel: [    8.109367] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Jan  1 00:00:08 lao kernel: [    8.109412] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Jan  1 00:00:08 lao kernel: [    8.155180] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jan  1 00:00:08 lao kernel: [    8.161386] rtc-pcf8523 1-0068: registered as rtc0
Jul 22 01:01:01 lao kernel: [    8.165059] rtc-pcf8523 1-0068: setting system clock to 2026-07-22T01:01:01 UTC (1784682061)
Jul 22 01:01:01 lao gpsd.hotplug: add /dev/ttyACM0
Jul 22 01:01:01 lao gpsdctl: gpsd_control(action=add, arg=/dev/ttyACM0)
Jul 22 01:01:01 lao gpsdctl: launching gpsd -n -F /run/gpsd.sock
Jul 22 01:01:01 lao kernel: [    8.322708] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jul 22 01:01:01 lao kernel: [    8.336418] NET: Registered protocol family 10
Jul 22 01:01:01 lao gpsd[188]: gpsd:ERROR: can't bind to IPv6 port 2947, Cannot assign requested address
Jul 22 01:01:01 lao kernel: [    8.338789] Segment Routing with IPv6
Jul 22 01:01:01 lao kernel: [    8.371681] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jul 22 01:01:01 lao kernel: [    8.381390] usbcore: registered new interface driver brcmfmac
Jul 22 01:01:01 lao kernel: [    8.562438] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jul 22 01:01:01 lao kernel: [    8.572514] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Jul 22 01:01:01 lao kernel: [    8.588634] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
Jul 22 01:01:22 lao wpa_supplicant[258]: Successfully initialized wpa_supplicant
Jul 22 01:01:22 lao kernel: [   29.906162] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Jul 22 01:01:22 lao wpa_supplicant[261]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
Jul 22 01:01:22 lao kernel: [   30.316283] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jul 22 01:01:22 lao kernel: [   30.316979] r8152 1-1.3:1.0 eth1: carrier on
Jul 22 01:01:23 lao ifplugd(eth0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jul 22 01:01:23 lao ifplugd(eth0): upping interface
Jul 22 01:01:23 lao kernel: [   31.172592] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Jul 22 01:01:23 lao ifplugd(eth0): using SIOCETHTOOL detection mode
Jul 22 01:01:23 lao ifplugd(eth0): interface exists
Jul 22 01:01:23 lao ifplugd(eth0): link is down
Jul 22 01:01:23 lao kernel: [   31.173111] bcmgenet fd580000.ethernet eth0: Link is Down
Jul 22 01:01:23 lao ifplugd(wlan0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jul 22 01:01:23 lao ifplugd(wlan0): using wireless extension detection mode
Jul 22 01:01:23 lao ifplugd(wlan0): interface exists
Jul 22 01:01:23 lao ifplugd(wlan0): link is down
Jul 22 01:01:23 lao ifplugd(eth1): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jul 22 01:01:23 lao ifplugd(eth1): using SIOCETHTOOL detection mode
Jul 22 01:01:23 lao ifplugd(eth1): interface exists
Jul 22 01:01:23 lao ifplugd(eth1): link is up
Jul 22 01:01:23 lao chronyd[359]: chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC -PRIVDROP -SCFILTER -SIGND +ASYNCDNS -NTS -SECHASH +IPV6 -DEBUG)
Jul 22 01:01:23 lao gpsd[363]: gpsd:ERROR: can't bind to IPv4 port 2947, Address already in use
Jul 22 01:01:23 lao gpsd[363]: gpsd:ERROR: maybe gpsd is already running!  Or systemd has the port?
Jul 22 01:01:23 lao gpsd[363]: gpsd:ERROR: SER: /dev/gps0 already opened by another process
Jul 22 01:01:23 lao sshd[373]: Server listening on 0.0.0.0 port 22.
Jul 22 01:01:23 lao sshd[373]: Server listening on :: port 22.
Jul 22 01:01:23 lao rpc.statd[387]: Version 2.3.3 starting
Jul 22 01:01:23 lao sm-notify[388]: Version 2.3.3 starting
Jul 22 01:01:23 lao rpc.statd[387]: Initializing NSM state
Jul 22 01:01:23 lao rpc.statd[387]: Running as root.  chown /run/nfs to choose different user
Jul 22 01:01:24 lao kernel: [   31.652730] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jul 22 01:01:25 lao kernel: [   32.791653] NFSD: Using UMH upcall client tracking operations.
Jul 22 01:01:25 lao kernel: [   32.791680] NFSD: starting 90-second grace period (net f0000081)
Jul 22 01:01:25 lao rpc.mountd[402]: Version 2.3.3 starting
Jul 22 01:01:25 lao su: + none root:news
Jul 22 01:01:27 lao ifplugd(eth0): link is up
Jul 22 01:01:27 lao ifplugd(eth0): executing '/etc/ifplugd/ifplugd.action eth0 up'
Jul 22 01:01:27 lao kernel: [   35.261135] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Jul 22 01:01:27 lao kernel: [   35.261200] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jul 22 01:01:27 lao udhcpc[488]: started, v1.33.0
Jul 22 01:01:27 lao udhcpc[488]: sending discover
Jul 22 01:01:27 lao udhcpc[488]: sending select for 192.168.1.146
Jul 22 01:01:27 lao udhcpc[488]: lease of 192.168.1.146 obtained, lease time 3600
Jul 22 01:01:27 lao ifplugd(eth0): exit code: 0
Jul 22 01:01:28 lao : starting pid 510, tty '': '/etc/init.d/rcK'
Jul 22 01:01:29 lao su: + none root:news
Jul 22 01:01:54 lao rpc.mountd[402]: Caught signal 15, un-registering and exiting.
Jul 22 01:01:54 lao sshd[373]: Received signal 15; terminating.
Jul 22 01:01:54 lao chronyd[359]: chronyd exiting
Jul 22 01:01:54 lao ifplugd(eth0): exiting
Jul 22 01:01:54 lao ifplugd(wlan0): exiting
Jul 22 01:01:54 lao ifplugd(eth1): exiting
Jul 22 01:01:56 lao wpa_supplicant[261]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Jul 22 01:01:56 lao wpa_supplicant[261]: p2p-dev-wlan0: CTRL-EVENT-TERMINATING 
Jul 22 01:01:56 lao wpa_supplicant[261]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
