Jan  1 00:00:05 mro kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Jan  1 00:00:05 mro kernel: [    0.000000] Linux version 5.10.36-v8 (valentic@cambria.valentic.net) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot v1.11-dirty) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Wed Apr 13 15:42:39 PDT 2022
Jan  1 00:00:05 mro kernel: [    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
Jan  1 00:00:05 mro kernel: [    0.000000] efi: UEFI not found.
Jan  1 00:00:05 mro kernel: [    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
Jan  1 00:00:05 mro kernel: [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Jan  1 00:00:05 mro kernel: [    0.000000] Zone ranges:
Jan  1 00:00:05 mro kernel: [    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
Jan  1 00:00:05 mro kernel: [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:05 mro kernel: [    0.000000]   Normal   empty
Jan  1 00:00:05 mro kernel: [    0.000000] Movable zone start for each node
Jan  1 00:00:05 mro kernel: [    0.000000] Early memory node ranges
Jan  1 00:00:05 mro kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000039bfffff]
Jan  1 00:00:05 mro kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:05 mro kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
Jan  1 00:00:05 mro kernel: [    0.000000] percpu: Embedded 32 pages/cpu s91224 r8192 d31656 u131072
Jan  1 00:00:05 mro kernel: [    0.000000] Detected PIPT I-cache on CPU0
Jan  1 00:00:05 mro kernel: [    0.000000] CPU features: detected: Spectre-v2
Jan  1 00:00:05 mro kernel: [    0.000000] CPU features: detected: Spectre-v4
Jan  1 00:00:05 mro kernel: [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Jan  1 00:00:05 mro kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990864
Jan  1 00:00:05 mro kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:B8:B6:7C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200
Jan  1 00:00:05 mro kernel: [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Jan  1 00:00:05 mro kernel: [    0.000000] software IO TLB: mapped [mem 0x0000000035c00000-0x0000000039c00000] (64MB)
Jan  1 00:00:05 mro kernel: [    0.000000] Memory: 3792268K/4026368K available (11264K kernel code, 1928K rwdata, 3972K rodata, 3712K init, 1242K bss, 168564K reserved, 65536K cma-reserved)
Jan  1 00:00:05 mro kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:05 mro kernel: [    0.000000] ftrace: allocating 36633 entries in 144 pages
Jan  1 00:00:05 mro kernel: [    0.000000] ftrace: allocated 144 pages with 2 groups
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: Preemptible hierarchical RCU implementation.
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: 	RCU event tracing is enabled.
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Jan  1 00:00:05 mro kernel: [    0.000000] 	Trampoline variant of Tasks RCU enabled.
Jan  1 00:00:05 mro kernel: [    0.000000] 	Rude variant of Tasks RCU enabled.
Jan  1 00:00:05 mro kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan  1 00:00:05 mro kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Jan  1 00:00:05 mro kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Jan  1 00:00:05 mro kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0
Jan  1 00:00:05 mro kernel: [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
Jan  1 00:00:05 mro kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
Jan  1 00:00:05 mro kernel: [    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Jan  1 00:00:05 mro kernel: [    0.000257] Console: colour dummy device 80x25
Jan  1 00:00:05 mro kernel: [    0.000785] printk: console [tty1] enabled
Jan  1 00:00:05 mro kernel: [    0.000845] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
Jan  1 00:00:05 mro kernel: [    0.000887] pid_max: default: 32768 minimum: 301
Jan  1 00:00:05 mro kernel: [    0.001041] LSM: Security Framework initializing
Jan  1 00:00:05 mro kernel: [    0.001280] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.001360] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.002775] Disabling memory control group subsystem
Jan  1 00:00:05 mro kernel: [    0.005028] rcu: Hierarchical SRCU implementation.
Jan  1 00:00:05 mro kernel: [    0.006069] EFI services will not be available.
Jan  1 00:00:05 mro kernel: [    0.006589] smp: Bringing up secondary CPUs ...
Jan  1 00:00:05 mro kernel: [    0.007576] Detected PIPT I-cache on CPU1
Jan  1 00:00:05 mro kernel: [    0.007654] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Jan  1 00:00:05 mro kernel: [    0.008828] Detected PIPT I-cache on CPU2
Jan  1 00:00:05 mro kernel: [    0.008875] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Jan  1 00:00:05 mro kernel: [    0.009969] Detected PIPT I-cache on CPU3
Jan  1 00:00:05 mro kernel: [    0.010015] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
Jan  1 00:00:05 mro kernel: [    0.010162] smp: Brought up 1 node, 4 CPUs
Jan  1 00:00:05 mro kernel: [    0.010252] SMP: Total of 4 processors activated.
Jan  1 00:00:05 mro kernel: [    0.010276] CPU features: detected: 32-bit EL0 Support
Jan  1 00:00:05 mro kernel: [    0.010299] CPU features: detected: CRC32 instructions
Jan  1 00:00:05 mro kernel: [    0.010323] CPU features: detected: 32-bit EL1 Support
Jan  1 00:00:05 mro kernel: [    0.045835] CPU: All CPU(s) started at EL2
Jan  1 00:00:05 mro kernel: [    0.045919] alternatives: patching kernel code
Jan  1 00:00:05 mro kernel: [    0.047521] devtmpfs: initialized
Jan  1 00:00:05 mro kernel: [    0.058042] Enabled cp15_barrier support
Jan  1 00:00:05 mro kernel: [    0.058109] Enabled setend support
Jan  1 00:00:05 mro kernel: [    0.058325] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan  1 00:00:05 mro kernel: [    0.058373] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.060483] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:05 mro kernel: [    0.061310] DMI not present or invalid.
Jan  1 00:00:05 mro kernel: [    0.061699] NET: Registered protocol family 16
Jan  1 00:00:05 mro kernel: [    0.064816] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Jan  1 00:00:05 mro kernel: [    0.065096] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Jan  1 00:00:05 mro kernel: [    0.066032] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Jan  1 00:00:05 mro kernel: [    0.066144] audit: initializing netlink subsys (disabled)
Jan  1 00:00:05 mro kernel: [    0.066548] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1
Jan  1 00:00:05 mro kernel: [    0.067049] thermal_sys: Registered thermal governor 'step_wise'
Jan  1 00:00:05 mro kernel: [    0.067508] cpuidle: using governor menu
Jan  1 00:00:05 mro kernel: [    0.067835] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Jan  1 00:00:05 mro kernel: [    0.068019] ASID allocator initialised with 65536 entries
Jan  1 00:00:05 mro kernel: [    0.068197] Serial: AMBA PL011 UART driver
Jan  1 00:00:05 mro kernel: [    0.096684] bcm2835-mbox fe00b880.mailbox: mailbox enabled
Jan  1 00:00:05 mro kernel: [    0.104323] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
Jan  1 00:00:05 mro kernel: [    0.108317] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
Jan  1 00:00:05 mro kernel: [    0.141926] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
Jan  1 00:00:05 mro kernel: [    0.145818] vgaarb: loaded
Jan  1 00:00:05 mro kernel: [    0.146250] SCSI subsystem initialized
Jan  1 00:00:05 mro kernel: [    0.146474] usbcore: registered new interface driver usbfs
Jan  1 00:00:05 mro kernel: [    0.146551] usbcore: registered new interface driver hub
Jan  1 00:00:05 mro kernel: [    0.146628] usbcore: registered new device driver usb
Jan  1 00:00:05 mro kernel: [    0.146947] usb_phy_generic phy: supply vcc not found, using dummy regulator
Jan  1 00:00:05 mro kernel: [    0.148769] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:05 mro kernel: [    1.168277] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:05 mro kernel: [    1.168398] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan  1 00:00:05 mro kernel: [    1.168572] FS-Cache: Loaded
Jan  1 00:00:05 mro kernel: [    1.168851] CacheFiles: Loaded
Jan  1 00:00:05 mro kernel: [    1.179265] NET: Registered protocol family 2
Jan  1 00:00:05 mro kernel: [    1.180470] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.180545] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.180840] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.181301] TCP: Hash tables configured (established 32768 bind 32768)
Jan  1 00:00:05 mro kernel: [    1.181559] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.181650] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.182006] NET: Registered protocol family 1
Jan  1 00:00:05 mro kernel: [    1.182944] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:05 mro kernel: [    1.182974] RPC: Registered udp transport module.
Jan  1 00:00:05 mro kernel: [    1.182994] RPC: Registered tcp transport module.
Jan  1 00:00:05 mro kernel: [    1.183014] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:05 mro kernel: [    1.183047] PCI: CLS 0 bytes, default 64
Jan  1 00:00:05 mro kernel: [    1.185380] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
Jan  1 00:00:05 mro kernel: [    1.185682] kvm [1]: IPA Size Limit: 44 bits
Jan  1 00:00:05 mro kernel: [    1.186856] kvm [1]: vgic interrupt IRQ9
Jan  1 00:00:05 mro kernel: [    1.187138] kvm [1]: Hyp mode initialized successfully
Jan  1 00:00:05 mro kernel: [    1.189295] Initialise system trusted keyrings
Jan  1 00:00:05 mro kernel: [    1.189660] workingset: timestamp_bits=46 max_order=20 bucket_order=0
Jan  1 00:00:05 mro kernel: [    1.195852] zbud: loaded
Jan  1 00:00:05 mro kernel: [    1.197602] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:05 mro kernel: [    1.198269] NFS: Registering the id_resolver key type
Jan  1 00:00:05 mro kernel: [    1.198327] Key type id_resolver registered
Jan  1 00:00:05 mro kernel: [    1.198350] Key type id_legacy registered
Jan  1 00:00:05 mro kernel: [    1.198473] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan  1 00:00:05 mro kernel: [    1.198500] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Jan  1 00:00:05 mro kernel: [    1.199631] Key type asymmetric registered
Jan  1 00:00:05 mro kernel: [    1.199658] Asymmetric key parser 'x509' registered
Jan  1 00:00:05 mro kernel: [    1.199717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Jan  1 00:00:05 mro kernel: [    1.199974] io scheduler mq-deadline registered
Jan  1 00:00:05 mro kernel: [    1.200000] io scheduler kyber registered
Jan  1 00:00:05 mro kernel: [    1.204194] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
Jan  1 00:00:05 mro kernel: [    1.204241] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
Jan  1 00:00:05 mro kernel: [    1.204329] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
Jan  1 00:00:05 mro kernel: [    1.204422] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
Jan  1 00:00:05 mro kernel: [    1.270862] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
Jan  1 00:00:05 mro kernel: [    1.271255] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
Jan  1 00:00:05 mro kernel: [    1.271287] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  1 00:00:05 mro kernel: [    1.271315] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
Jan  1 00:00:05 mro kernel: [    1.271416] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
Jan  1 00:00:05 mro kernel: [    1.271669] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 00:00:05 mro kernel: [    1.275285] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan  1 00:00:05 mro kernel: [    1.275696] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
Jan  1 00:00:05 mro kernel: [    1.275830] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
Jan  1 00:00:05 mro kernel: [    1.276270] pci 0000:01:00.0: PME# supported from D0 D3hot
Jan  1 00:00:05 mro kernel: [    1.287982] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan  1 00:00:05 mro kernel: [    1.288041] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
Jan  1 00:00:05 mro kernel: [    1.288074] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
Jan  1 00:00:05 mro kernel: [    1.288126] pci 0000:00:00.0: PCI bridge to [bus 01]
Jan  1 00:00:05 mro kernel: [    1.288159] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
Jan  1 00:00:05 mro kernel: [    1.288849] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
Jan  1 00:00:05 mro kernel: [    1.288897] bcm2708_fb: probe of soc:fb failed with error -2
Jan  1 00:00:05 mro kernel: [    1.295971] iproc-rng200 fe104000.rng: hwrng registered
Jan  1 00:00:05 mro kernel: [    1.296326] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jan  1 00:00:05 mro kernel: [    1.297244] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
Jan  1 00:00:05 mro kernel: [    1.297676] cacheinfo: Unable to detect cache hierarchy for CPU 0
Jan  1 00:00:05 mro kernel: [    1.308954] brd: module loaded
Jan  1 00:00:05 mro kernel: [    1.321250] loop: module loaded
Jan  1 00:00:05 mro kernel: [    1.322831] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:05 mro kernel: [    1.326089] libphy: Fixed MDIO Bus: probed
Jan  1 00:00:05 mro kernel: [    1.327626] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
Jan  1 00:00:05 mro kernel: [    1.336830] libphy: bcmgenet MII bus: probed
Jan  1 00:00:05 mro kernel: [    1.384909] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
Jan  1 00:00:05 mro kernel: [    1.386041] usbcore: registered new interface driver r8152
Jan  1 00:00:05 mro kernel: [    1.386120] usbcore: registered new interface driver lan78xx
Jan  1 00:00:05 mro kernel: [    1.386197] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:05 mro kernel: [    1.433685] pci 0000:00:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:05 mro kernel: [    1.433890] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:05 mro kernel: [    1.433936] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:05 mro kernel: [    1.434688] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
Jan  1 00:00:05 mro kernel: [    1.435986] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Jan  1 00:00:05 mro kernel: [    1.436019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:05 mro kernel: [    1.436046] usb usb1: Product: xHCI Host Controller
Jan  1 00:00:05 mro kernel: [    1.436069] usb usb1: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:05 mro kernel: [    1.436092] usb usb1: SerialNumber: 0000:01:00.0
Jan  1 00:00:05 mro kernel: [    1.436857] hub 1-0:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    1.436974] hub 1-0:1.0: 1 port detected
Jan  1 00:00:05 mro kernel: [    1.437601] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:05 mro kernel: [    1.437637] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
Jan  1 00:00:05 mro kernel: [    1.437675] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
Jan  1 00:00:05 mro kernel: [    1.438087] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
Jan  1 00:00:05 mro kernel: [    1.438118] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:05 mro kernel: [    1.438144] usb usb2: Product: xHCI Host Controller
Jan  1 00:00:05 mro kernel: [    1.438167] usb usb2: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:05 mro kernel: [    1.438189] usb usb2: SerialNumber: 0000:01:00.0
Jan  1 00:00:05 mro kernel: [    1.438820] hub 2-0:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    1.438907] hub 2-0:1.0: 4 ports detected
Jan  1 00:00:05 mro kernel: [    1.440379] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:05 mro kernel: [    1.441223] usbcore: registered new interface driver uas
Jan  1 00:00:05 mro kernel: [    1.441338] usbcore: registered new interface driver usb-storage
Jan  1 00:00:05 mro kernel: [    1.441535] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:05 mro kernel: [    1.443364] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Jan  1 00:00:05 mro kernel: [    1.446611] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:05 mro kernel: [    1.446641] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:05 mro kernel: [    1.447303] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
Jan  1 00:00:05 mro kernel: [    1.447828] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:05 mro kernel: [    1.450662] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:05 mro kernel: [    1.450999] hid: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:05 mro kernel: [    1.451214] usbcore: registered new interface driver usbhid
Jan  1 00:00:05 mro kernel: [    1.451238] usbhid: USB HID core driver
Jan  1 00:00:05 mro kernel: [    1.458999] Initializing XFRM netlink socket
Jan  1 00:00:05 mro kernel: [    1.459069] NET: Registered protocol family 17
Jan  1 00:00:05 mro kernel: [    1.459201] Key type dns_resolver registered
Jan  1 00:00:05 mro kernel: [    1.459767] registered taskstats version 1
Jan  1 00:00:05 mro kernel: [    1.459814] Loading compiled-in X.509 certificates
Jan  1 00:00:05 mro kernel: [    1.460386] Key type ._fscrypt registered
Jan  1 00:00:05 mro kernel: [    1.460412] Key type .fscrypt registered
Jan  1 00:00:05 mro kernel: [    1.460432] Key type fscrypt-provisioning registered
Jan  1 00:00:05 mro kernel: [    1.471737] uart-pl011 fe201000.serial: there is not valid maps for state default
Jan  1 00:00:05 mro kernel: [    1.472047] uart-pl011 fe201000.serial: cts_event_workaround enabled
Jan  1 00:00:05 mro kernel: [    1.472174] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
Jan  1 00:00:05 mro kernel: [    2.740242] printk: console [ttyAMA0] enabled
Jan  1 00:00:05 mro kernel: [    2.751800] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Jan  1 00:00:05 mro kernel: [    2.760033] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jan  1 00:00:05 mro kernel: [    2.766076] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
Jan  1 00:00:05 mro kernel: [    2.800634] of_cfs_init
Jan  1 00:00:05 mro kernel: [    2.803243] of_cfs_init: OK
Jan  1 00:00:05 mro kernel: [    2.807397] uart-pl011 fe201000.serial: no DMA platform data
Jan  1 00:00:05 mro kernel: [    2.827759] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 00:00:05 mro kernel: [    2.834944] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:05 mro kernel: [    2.843255] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
Jan  1 00:00:05 mro kernel: [    2.853707] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:05 mro kernel: [    2.861100] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:05 mro kernel: [    2.872418] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 00:00:05 mro kernel: [    2.882446] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:05 mro kernel: [    2.916977] random: fast init done
Jan  1 00:00:05 mro kernel: [    2.960802] mmc1: new high speed SDIO card at address 0001
Jan  1 00:00:05 mro kernel: [    2.983482] mmc0: new ultra high speed DDR50 SDXC card at address 59b4
Jan  1 00:00:05 mro kernel: [    2.984991] usb 1-1: new high-speed USB device number 2 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    2.999832] mmcblk0: mmc0:59b4 SD64G 59.4 GiB
Jan  1 00:00:05 mro kernel: [    3.009330]  mmcblk0: p1 p2
Jan  1 00:00:05 mro kernel: [    3.040298] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:05 mro kernel: [    3.051034] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:05 mro kernel: [    3.062147] devtmpfs: mounted
Jan  1 00:00:05 mro kernel: [    3.076443] Freeing unused kernel memory: 3712K
Jan  1 00:00:05 mro kernel: [    3.082849] Run /sbin/init as init process
Jan  1 00:00:05 mro kernel: [    3.147428] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
Jan  1 00:00:05 mro kernel: [    3.157454] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    3.165421] usb 1-1: Product: USB2.0 Hub
Jan  1 00:00:05 mro kernel: [    3.171276] hub 1-1:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    3.175335] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:05 mro kernel: [    3.273149] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    3.298315] usb 2-2: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
Jan  1 00:00:05 mro kernel: [    3.306537] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
Jan  1 00:00:05 mro kernel: [    3.313703] usb 2-2: Product: USB 10/100/1000 LAN
Jan  1 00:00:05 mro kernel: [    3.318433] usb 2-2: Manufacturer: TP-Link
Jan  1 00:00:05 mro kernel: [    3.322553] usb 2-2: SerialNumber: 000001
Jan  1 00:00:05 mro kernel: [    3.461557] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    3.502772] r8152 2-2:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2
Jan  1 00:00:05 mro kernel: [    3.511502] r8152 2-2:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2)
Jan  1 00:00:05 mro kernel: [    3.549872] r8152 2-2:1.0 eth1: v1.12.11
Jan  1 00:00:05 mro kernel: [    3.576807] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    3.685303] usb 1-1.1: New USB device found, idVendor=1546, idProduct=01a7, bcdDevice= 1.00
Jan  1 00:00:05 mro kernel: [    3.693705] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    3.701046] usb 1-1.1: Product: u-blox 7 - GPS/GNSS Receiver
Jan  1 00:00:05 mro kernel: [    3.706740] usb 1-1.1: Manufacturer: u-blox AG - www.u-blox.com
Jan  1 00:00:05 mro kernel: [    3.796823] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    3.901363] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
Jan  1 00:00:05 mro kernel: [    3.909780] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    3.917117] usb 1-1.3: Product: USB 2.0 Hub
Jan  1 00:00:05 mro kernel: [    3.922904] hub 1-1.3:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    3.926985] hub 1-1.3:1.0: 4 ports detected
Jan  1 00:00:05 mro kernel: [    4.316838] usb 1-1.3.4: new high-speed USB device number 5 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    4.521456] usb 1-1.3.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
Jan  1 00:00:05 mro kernel: [    4.530060] usb 1-1.3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    4.537579] usb 1-1.3.4: Product: USB 2.0 Hub
Jan  1 00:00:05 mro kernel: [    4.543677] hub 1-1.3.4:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    4.547950] hub 1-1.3.4:1.0: 4 ports detected
Jan  1 00:00:05 mro kernel: [    4.639191] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jan  1 00:00:05 mro kernel: [    4.944834] usb 1-1.3.4.4: new high-speed USB device number 6 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    4.982186] PPP generic driver version 2.4.2
Jan  1 00:00:05 mro kernel: [    4.999265] PPP Deflate Compression module registered
Jan  1 00:00:05 mro kernel: [    5.050355] PPP BSD Compression module registered
Jan  1 00:00:05 mro kernel: [    5.149354] usb 1-1.3.4.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
Jan  1 00:00:05 mro kernel: [    5.158134] usb 1-1.3.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    5.165828] usb 1-1.3.4.4: Product: USB 2.0 Hub
Jan  1 00:00:05 mro kernel: [    5.172106] hub 1-1.3.4.4:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    5.176550] hub 1-1.3.4.4:1.0: 4 ports detected
Jan  1 00:00:05 mro sysctl: * Applying /etc/sysctl.conf ...
Jan  1 00:00:05 mro sysctl: kernel.panic = 10
Jan  1 00:00:05 mro sysctl: kernel.panic_on_oops = 1
Jan  1 00:00:05 mro sysctl: kernel.hung_task_panic = 1
Jan  1 00:00:05 mro sysctl: kernel.printk = 4 4 1 7
Jan  1 00:00:05 mro kernel: [    5.568848] usb 1-1.3.4.4.4: new high-speed USB device number 7 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    5.769199] usb 1-1.3.4.4.4: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=1c.83
Jan  1 00:00:05 mro kernel: [    5.769224] usb 1-1.3.4.4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan  1 00:00:06 mro rsyslogd: [origin software="rsyslogd" swVersion="8.2010.0" x-pid="122" x-info="https://www.rsyslog.com"] start
Jan  1 00:00:07 mro kernel: [    7.483594] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:07 mro kernel: [    7.486259] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:07 mro kernel: [    7.486349] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:07 mro kernel: [    7.884417] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Jan  1 00:00:07 mro kernel: [    7.885230] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Jan  1 00:00:07 mro kernel: [    7.885750] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Jan  1 00:00:07 mro kernel: [    7.886239] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Jan  1 00:00:08 mro kernel: [    8.209940] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:08 mro kernel: [    8.211737] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jan  1 00:00:08 mro kernel: [    8.211764] [vc_sm_connected_init]: start
Jan  1 00:00:08 mro kernel: [    8.212886] [vc_sm_connected_init]: installed successfully
Jan  1 00:00:08 mro kernel: [    8.290811] rtc-pcf8523 1-0068: registered as rtc0
Apr 22 19:10:07 mro kernel: [    8.294325] rtc-pcf8523 1-0068: setting system clock to 2026-04-22T19:10:07 UTC (1776885007)
Apr 22 19:10:07 mro kernel: [    8.357296] mc: Linux media interface: v0.10
Apr 22 19:10:07 mro kernel: [    8.539395] videodev: Linux video capture interface: v2.00
Apr 22 19:10:07 mro kernel: [    8.699248] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
Apr 22 19:10:07 mro kernel: [    8.701915] usbcore: registered new interface driver cdc_acm
Apr 22 19:10:07 mro kernel: [    8.701931] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Apr 22 19:10:08 mro kernel: [    8.798989] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Apr 22 19:10:08 mro kernel: [    8.798996] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Apr 22 19:10:08 mro kernel: [    8.799323] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Apr 22 19:10:08 mro kernel: [    8.892036] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Apr 22 19:10:08 mro kernel: [    8.902653] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Apr 22 19:10:08 mro gpsd.hotplug: add /dev/ttyACM0
Apr 22 19:10:08 mro kernel: [    8.912900] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Apr 22 19:10:08 mro kernel: [    8.915253] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Apr 22 19:10:08 mro kernel: [    8.916099] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Apr 22 19:10:08 mro kernel: [    8.917802] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Apr 22 19:10:08 mro kernel: [    8.919476] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Apr 22 19:10:08 mro kernel: [    8.921059] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Apr 22 19:10:08 mro kernel: [    8.921094] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Apr 22 19:10:08 mro kernel: [    8.921115] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Apr 22 19:10:08 mro kernel: [    8.921133] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Apr 22 19:10:08 mro kernel: [    8.921160] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Apr 22 19:10:08 mro kernel: [    8.921390] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Apr 22 19:10:08 mro kernel: [    8.922760] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Apr 22 19:10:08 mro kernel: [    8.922819] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Apr 22 19:10:08 mro kernel: [    8.926386] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Apr 22 19:10:08 mro kernel: [    8.926439] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Apr 22 19:10:08 mro kernel: [    8.930658] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Apr 22 19:10:08 mro kernel: [    8.930702] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Apr 22 19:10:08 mro gpsdctl: gpsd_control(action=add, arg=/dev/ttyACM0)
Apr 22 19:10:08 mro gpsdctl: launching gpsd -n -F /run/gpsd.sock
Apr 22 19:10:08 mro kernel: [    9.266116] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Apr 22 19:10:08 mro kernel: [    9.425054] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Apr 22 19:10:08 mro kernel: [    9.435043] usbcore: registered new interface driver brcmfmac
Apr 22 19:10:08 mro gpsd[191]: gpsd:ERROR: can't bind to IPv6 port 2947, Cannot assign requested address
Apr 22 19:10:08 mro kernel: [    9.629061] NET: Registered protocol family 10
Apr 22 19:10:08 mro kernel: [    9.630739] Segment Routing with IPv6
Apr 22 19:10:09 mro kernel: [    9.889160] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Apr 22 19:10:09 mro kernel: [    9.897947] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Apr 22 19:10:09 mro kernel: [    9.910054] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
Apr 22 19:10:09 mro kernel: [   10.019037] urandom_read: 4 callbacks suppressed
Apr 22 19:10:09 mro kernel: [   10.019051] random: dd: uninitialized urandom read (512 bytes read)
Apr 22 19:10:09 mro kernel: [   10.104409] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
Apr 22 19:10:09 mro kernel: [   10.104491] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
Apr 22 19:10:09 mro wpa_supplicant[231]: Successfully initialized wpa_supplicant
Apr 22 19:10:09 mro kernel: [   10.760909] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Apr 22 19:10:11 mro kernel: [   12.220824] random: crng init done
Apr 22 19:10:11 mro wpa_supplicant[234]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
Apr 22 19:10:11 mro kernel: [   12.544551] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Apr 22 19:10:11 mro kernel: [   12.544956] bcmgenet fd580000.ethernet eth0: Link is Down
Apr 22 19:10:11 mro kernel: [   12.653765] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Apr 22 19:10:11 mro kernel: [   12.654389] r8152 2-2:1.0 eth1: carrier on
Apr 22 19:10:12 mro ifplugd(eth0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Apr 22 19:10:12 mro ifplugd(eth0): using SIOCETHTOOL detection mode
Apr 22 19:10:12 mro ifplugd(eth0): interface exists
Apr 22 19:10:12 mro ifplugd(eth0): link is down
Apr 22 19:10:12 mro ifplugd(wlan0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Apr 22 19:10:12 mro ifplugd(wlan0): using wireless extension detection mode
Apr 22 19:10:12 mro ifplugd(wlan0): interface exists
Apr 22 19:10:12 mro ifplugd(wlan0): link is down
Apr 22 19:10:12 mro ifplugd(eth1): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Apr 22 19:10:12 mro ifplugd(eth1): using SIOCETHTOOL detection mode
Apr 22 19:10:12 mro ifplugd(eth1): interface exists
Apr 22 19:10:12 mro ifplugd(eth1): link is up
Apr 22 19:10:12 mro chronyd[330]: chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC -PRIVDROP -SCFILTER -SIGND +ASYNCDNS -NTS -SECHASH +IPV6 -DEBUG)
Apr 22 19:10:12 mro gpsd[334]: gpsd:ERROR: can't bind to IPv4 port 2947, Address already in use
Apr 22 19:10:12 mro gpsd[334]: gpsd:ERROR: maybe gpsd is already running!  Or systemd has the port?
Apr 22 19:10:12 mro gpsd[334]: gpsd:ERROR: SER: /dev/gps0 already opened by another process
Apr 22 19:10:12 mro sshd[345]: Server listening on 0.0.0.0 port 22.
Apr 22 19:10:12 mro sshd[345]: Server listening on :: port 22.
Apr 22 19:10:13 mro rpc.statd[358]: Version 2.3.3 starting
Apr 22 19:10:13 mro sm-notify[359]: Version 2.3.3 starting
Apr 22 19:10:13 mro rpc.statd[358]: Initializing NSM state
Apr 22 19:10:13 mro rpc.statd[358]: Running as root.  chown /run/nfs to choose different user
Apr 22 19:10:13 mro kernel: [   14.570306] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Apr 22 19:10:14 mro kernel: [   15.888135] NFSD: Using UMH upcall client tracking operations.
Apr 22 19:10:14 mro kernel: [   15.888164] NFSD: starting 90-second grace period (net f0000081)
Apr 22 19:10:14 mro rpc.mountd[373]: Version 2.3.3 starting
Apr 22 19:10:15 mro su: + none root:news
Apr 22 19:10:15 mro ifplugd(eth0): link is up
Apr 22 19:10:15 mro ifplugd(eth0): executing '/etc/ifplugd/ifplugd.action eth0 up'
Apr 22 19:10:15 mro kernel: [   16.637011] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Apr 22 19:10:15 mro kernel: [   16.637080] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Apr 22 19:10:15 mro ifplugd(eth0): exit code: 0
Apr 22 19:10:19 mro : starting pid 461, tty '/dev/console': '/sbin/getty -L  console 0 vt100 '
Apr 22 19:10:19 mro : starting pid 462, tty '/dev/tty1': '/sbin/getty -L  tty1 0 vt100 '
Apr 22 19:10:23 mro chronyd[330]: Selected source 104.152.220.5 (pool.ntp.org)
Apr 22 19:10:25 mro chronyd[330]: Selected source 66.42.71.197 (pool.ntp.org)
Apr 22 19:14:38 mro kernel: [  280.385802] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Apr 22 20:00:01 mro relay-watchdog: Relay flag is still current
Apr 22 20:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 22 21:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 22 21:00:01 mro relay-watchdog: Relay flag is still current
Apr 22 22:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 22 22:00:01 mro relay-watchdog: Relay flag is still current
Apr 22 23:00:01 mro relay-watchdog: Relay flag is still current
Apr 22 23:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 00:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 00:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 01:00:02 mro relay-watchdog: Relay flag is still current
Apr 23 01:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 23 02:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 02:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 03:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 03:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 04:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Apr 23 04:00:02 mro relay-watchdog: Relay flag is still current
Apr 23 05:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 23 06:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 23 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 23 07:00:02 mro relay-watchdog: Relay flag is still current
Apr 23 08:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 23 09:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Apr 23 09:00:02 mro relay-watchdog: Relay flag is still current
Apr 23 10:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 23 11:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 11:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 23 12:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 12:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 13:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 13:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 14:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 14:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 15:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 15:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 16:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 16:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 17:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 17:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 18:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 18:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 19:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 19:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 20:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 20:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 21:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 21:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 22:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 22:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 23 23:00:01 mro relay-watchdog: Relay flag is still current
Apr 23 23:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 00:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 00:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 24 01:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 01:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 02:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 02:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 03:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 03:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 04:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 04:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 24 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 24 05:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 24 06:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 07:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 24 08:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Apr 24 08:00:02 mro relay-watchdog: Relay flag is still current
Apr 24 09:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 24 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 24 10:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 11:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 24 11:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 12:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 12:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 13:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 13:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 14:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 14:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 15:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 15:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 16:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 16:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 17:00:02 mro relay-watchdog: Relay flag is still current
Apr 24 17:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 24 18:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 18:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 19:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 19:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 20:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 20:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 21:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 21:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 22:00:01 mro relay-watchdog: Relay flag is still current
Apr 24 22:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 23:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 24 23:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 00:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 00:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 01:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 01:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 02:00:02 mro relay-watchdog: Relay flag is still current
Apr 25 02:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 25 03:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 03:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 04:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 25 04:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 25 05:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 25 06:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 25 07:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 08:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 25 09:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 25 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 25 10:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 11:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 11:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 25 12:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 12:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 13:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 13:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 14:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 14:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 15:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 15:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 16:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 16:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 17:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 17:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 18:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 18:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 19:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 19:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 20:00:02 mro relay-watchdog: Relay flag is still current
Apr 25 20:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 25 21:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 21:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 22:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 22:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 25 23:00:01 mro relay-watchdog: Relay flag is still current
Apr 25 23:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 00:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 00:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 01:00:02 mro relay-watchdog: Relay flag is still current
Apr 26 01:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 26 02:00:02 mro relay-watchdog: Relay flag is still current
Apr 26 02:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 26 03:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 03:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 04:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 04:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 26 05:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 26 06:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Apr 26 06:00:02 mro relay-watchdog: Relay flag is still current
Apr 26 07:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 26 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 26 08:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 26 09:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 10:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 26 11:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 11:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 12:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 12:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 13:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 13:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 14:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 14:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 15:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 15:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 16:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 16:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 17:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 17:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 18:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 18:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 19:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 19:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 20:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 20:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 21:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 21:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 22:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 22:00:01 mro relay-watchdog: Relay flag is still current
Apr 26 23:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 26 23:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 00:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 00:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 01:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 01:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 02:00:02 mro relay-watchdog: Relay flag is still current
Apr 27 02:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 27 03:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 03:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 04:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Apr 27 04:00:02 mro relay-watchdog: Relay flag is still current
Apr 27 05:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 27 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 27 06:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 27 07:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 08:00:02 mro relay-watchdog: Relay flag is still current
Apr 27 08:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Apr 27 09:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 27 10:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Apr 27 10:00:02 mro relay-watchdog: Relay flag is still current
Apr 27 11:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 11:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 12:00:02 mro relay-watchdog: Relay flag is still current
Apr 27 12:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 27 13:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 13:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 14:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 14:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 15:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 15:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 16:00:02 mro relay-watchdog: Relay flag is still current
Apr 27 16:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 27 17:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 17:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 18:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 18:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 19:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 19:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 20:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 20:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 21:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 21:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 22:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 27 22:00:01 mro relay-watchdog: Relay flag is still current
Apr 27 23:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 27 23:00:02 mro relay-watchdog: Relay flag is still current
Apr 28 00:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 00:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 01:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 01:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 02:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 02:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 03:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 03:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 04:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 04:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 28 05:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 28 06:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 28 07:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 28 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 28 08:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 09:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 28 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 28 10:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 11:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 11:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 12:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 12:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 13:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 13:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 14:00:02 mro relay-watchdog: Relay flag is still current
Apr 28 14:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 28 15:00:02 mro relay-watchdog: Relay flag is still current
Apr 28 15:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 28 16:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 16:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 17:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 17:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 18:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 18:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 19:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 19:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 20:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 20:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 21:00:02 mro exchange-watchdog: Exchange flag is still current
Apr 28 21:00:02 mro relay-watchdog: Relay flag is still current
Apr 28 22:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 22:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 28 23:00:01 mro relay-watchdog: Relay flag is still current
Apr 28 23:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 00:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 00:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 01:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 01:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 02:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 02:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 03:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 03:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 04:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 04:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 29 05:00:02 mro relay-watchdog: Relay flag is still current
Apr 29 05:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Apr 29 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 29 06:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 29 07:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 08:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 29 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 29 09:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Apr 29 10:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 11:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 11:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 12:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 12:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 13:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 13:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 14:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 14:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 15:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 15:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 16:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 16:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 17:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 17:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 18:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 18:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 19:00:01 mro relay-watchdog: Relay flag is still current
Apr 29 19:00:01 mro exchange-watchdog: Exchange flag is still current
Apr 29 19:06:02 mro cron.flagwatchdog: Reboot system flag detected
Apr 29 19:06:02 mro cron.flagwatchdog: Rebooting system
Apr 29 19:06:02 mro : starting pid 11444, tty '': '/etc/init.d/rcK'
Apr 29 19:06:16 mro su: + none root:news
Apr 29 19:06:42 mro rpc.mountd[373]: Caught signal 15, un-registering and exiting.
Apr 29 19:06:42 mro sshd[345]: Received signal 15; terminating.
Apr 29 19:06:42 mro chronyd[330]: chronyd exiting
Apr 29 19:06:42 mro ifplugd(eth0): exiting
Apr 29 19:06:42 mro ifplugd(wlan0): exiting
Apr 29 19:06:42 mro ifplugd(eth1): exiting
Apr 29 19:06:43 mro kernel: [604612.410464] bcmgenet fd580000.ethernet eth0: Link is Down
Apr 29 19:06:43 mro wpa_supplicant[234]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Apr 29 19:06:43 mro wpa_supplicant[234]: p2p-dev-wlan0: CTRL-EVENT-TERMINATING 
Apr 29 19:06:43 mro wpa_supplicant[234]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
