Jan  1 00:00:05 mro kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Jan  1 00:00:05 mro kernel: [    0.000000] Linux version 5.10.36-v8 (valentic@cambria.valentic.net) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot v1.11-dirty) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Wed Apr 13 15:42:39 PDT 2022
Jan  1 00:00:05 mro kernel: [    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
Jan  1 00:00:05 mro kernel: [    0.000000] efi: UEFI not found.
Jan  1 00:00:05 mro kernel: [    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
Jan  1 00:00:05 mro kernel: [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Jan  1 00:00:05 mro kernel: [    0.000000] Zone ranges:
Jan  1 00:00:05 mro kernel: [    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
Jan  1 00:00:05 mro kernel: [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:05 mro kernel: [    0.000000]   Normal   empty
Jan  1 00:00:05 mro kernel: [    0.000000] Movable zone start for each node
Jan  1 00:00:05 mro kernel: [    0.000000] Early memory node ranges
Jan  1 00:00:05 mro kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000039bfffff]
Jan  1 00:00:05 mro kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:05 mro kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
Jan  1 00:00:05 mro kernel: [    0.000000] percpu: Embedded 32 pages/cpu s91224 r8192 d31656 u131072
Jan  1 00:00:05 mro kernel: [    0.000000] Detected PIPT I-cache on CPU0
Jan  1 00:00:05 mro kernel: [    0.000000] CPU features: detected: Spectre-v2
Jan  1 00:00:05 mro kernel: [    0.000000] CPU features: detected: Spectre-v4
Jan  1 00:00:05 mro kernel: [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Jan  1 00:00:05 mro kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990864
Jan  1 00:00:05 mro kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:B8:B6:7C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200
Jan  1 00:00:05 mro kernel: [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Jan  1 00:00:05 mro kernel: [    0.000000] software IO TLB: mapped [mem 0x0000000035c00000-0x0000000039c00000] (64MB)
Jan  1 00:00:05 mro kernel: [    0.000000] Memory: 3792268K/4026368K available (11264K kernel code, 1928K rwdata, 3972K rodata, 3712K init, 1242K bss, 168564K reserved, 65536K cma-reserved)
Jan  1 00:00:05 mro kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:05 mro kernel: [    0.000000] ftrace: allocating 36633 entries in 144 pages
Jan  1 00:00:05 mro kernel: [    0.000000] ftrace: allocated 144 pages with 2 groups
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: Preemptible hierarchical RCU implementation.
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: 	RCU event tracing is enabled.
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Jan  1 00:00:05 mro kernel: [    0.000000] 	Trampoline variant of Tasks RCU enabled.
Jan  1 00:00:05 mro kernel: [    0.000000] 	Rude variant of Tasks RCU enabled.
Jan  1 00:00:05 mro kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Jan  1 00:00:05 mro kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan  1 00:00:05 mro kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Jan  1 00:00:05 mro kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Jan  1 00:00:05 mro kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0
Jan  1 00:00:05 mro kernel: [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
Jan  1 00:00:05 mro kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
Jan  1 00:00:05 mro kernel: [    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Jan  1 00:00:05 mro kernel: [    0.000261] Console: colour dummy device 80x25
Jan  1 00:00:05 mro kernel: [    0.000788] printk: console [tty1] enabled
Jan  1 00:00:05 mro kernel: [    0.000849] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
Jan  1 00:00:05 mro kernel: [    0.000891] pid_max: default: 32768 minimum: 301
Jan  1 00:00:05 mro kernel: [    0.001048] LSM: Security Framework initializing
Jan  1 00:00:05 mro kernel: [    0.001287] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.001367] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.002775] Disabling memory control group subsystem
Jan  1 00:00:05 mro kernel: [    0.005029] rcu: Hierarchical SRCU implementation.
Jan  1 00:00:05 mro kernel: [    0.006075] EFI services will not be available.
Jan  1 00:00:05 mro kernel: [    0.006593] smp: Bringing up secondary CPUs ...
Jan  1 00:00:05 mro kernel: [    0.007580] Detected PIPT I-cache on CPU1
Jan  1 00:00:05 mro kernel: [    0.007660] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Jan  1 00:00:05 mro kernel: [    0.008840] Detected PIPT I-cache on CPU2
Jan  1 00:00:05 mro kernel: [    0.008886] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Jan  1 00:00:05 mro kernel: [    0.009977] Detected PIPT I-cache on CPU3
Jan  1 00:00:05 mro kernel: [    0.010023] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
Jan  1 00:00:05 mro kernel: [    0.010171] smp: Brought up 1 node, 4 CPUs
Jan  1 00:00:05 mro kernel: [    0.010261] SMP: Total of 4 processors activated.
Jan  1 00:00:05 mro kernel: [    0.010285] CPU features: detected: 32-bit EL0 Support
Jan  1 00:00:05 mro kernel: [    0.010308] CPU features: detected: CRC32 instructions
Jan  1 00:00:05 mro kernel: [    0.010331] CPU features: detected: 32-bit EL1 Support
Jan  1 00:00:05 mro kernel: [    0.045761] CPU: All CPU(s) started at EL2
Jan  1 00:00:05 mro kernel: [    0.045843] alternatives: patching kernel code
Jan  1 00:00:05 mro kernel: [    0.047444] devtmpfs: initialized
Jan  1 00:00:05 mro kernel: [    0.057949] Enabled cp15_barrier support
Jan  1 00:00:05 mro kernel: [    0.058017] Enabled setend support
Jan  1 00:00:05 mro kernel: [    0.058231] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan  1 00:00:05 mro kernel: [    0.058278] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    0.060381] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:05 mro kernel: [    0.061209] DMI not present or invalid.
Jan  1 00:00:05 mro kernel: [    0.061594] NET: Registered protocol family 16
Jan  1 00:00:05 mro kernel: [    0.064710] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Jan  1 00:00:05 mro kernel: [    0.064991] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Jan  1 00:00:05 mro kernel: [    0.065929] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Jan  1 00:00:05 mro kernel: [    0.066043] audit: initializing netlink subsys (disabled)
Jan  1 00:00:05 mro kernel: [    0.066448] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1
Jan  1 00:00:05 mro kernel: [    0.066949] thermal_sys: Registered thermal governor 'step_wise'
Jan  1 00:00:05 mro kernel: [    0.067409] cpuidle: using governor menu
Jan  1 00:00:05 mro kernel: [    0.067738] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Jan  1 00:00:05 mro kernel: [    0.067922] ASID allocator initialised with 65536 entries
Jan  1 00:00:05 mro kernel: [    0.068072] Serial: AMBA PL011 UART driver
Jan  1 00:00:05 mro kernel: [    0.096591] bcm2835-mbox fe00b880.mailbox: mailbox enabled
Jan  1 00:00:05 mro kernel: [    0.104315] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
Jan  1 00:00:05 mro kernel: [    0.108310] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
Jan  1 00:00:05 mro kernel: [    0.142013] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
Jan  1 00:00:05 mro kernel: [    0.145982] vgaarb: loaded
Jan  1 00:00:05 mro kernel: [    0.146416] SCSI subsystem initialized
Jan  1 00:00:05 mro kernel: [    0.146637] usbcore: registered new interface driver usbfs
Jan  1 00:00:05 mro kernel: [    0.146713] usbcore: registered new interface driver hub
Jan  1 00:00:05 mro kernel: [    0.146794] usbcore: registered new device driver usb
Jan  1 00:00:05 mro kernel: [    0.147118] usb_phy_generic phy: supply vcc not found, using dummy regulator
Jan  1 00:00:05 mro kernel: [    0.148929] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:05 mro kernel: [    1.167178] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:05 mro kernel: [    1.167297] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan  1 00:00:05 mro kernel: [    1.167472] FS-Cache: Loaded
Jan  1 00:00:05 mro kernel: [    1.167721] CacheFiles: Loaded
Jan  1 00:00:05 mro kernel: [    1.178131] NET: Registered protocol family 2
Jan  1 00:00:05 mro kernel: [    1.179333] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.179408] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.179661] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.180117] TCP: Hash tables configured (established 32768 bind 32768)
Jan  1 00:00:05 mro kernel: [    1.180369] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.180461] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:05 mro kernel: [    1.180810] NET: Registered protocol family 1
Jan  1 00:00:05 mro kernel: [    1.181802] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:05 mro kernel: [    1.181832] RPC: Registered udp transport module.
Jan  1 00:00:05 mro kernel: [    1.181853] RPC: Registered tcp transport module.
Jan  1 00:00:05 mro kernel: [    1.181873] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:05 mro kernel: [    1.181906] PCI: CLS 0 bytes, default 64
Jan  1 00:00:05 mro kernel: [    1.184190] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
Jan  1 00:00:05 mro kernel: [    1.184492] kvm [1]: IPA Size Limit: 44 bits
Jan  1 00:00:05 mro kernel: [    1.185699] kvm [1]: vgic interrupt IRQ9
Jan  1 00:00:05 mro kernel: [    1.185982] kvm [1]: Hyp mode initialized successfully
Jan  1 00:00:05 mro kernel: [    1.188090] Initialise system trusted keyrings
Jan  1 00:00:05 mro kernel: [    1.188451] workingset: timestamp_bits=46 max_order=20 bucket_order=0
Jan  1 00:00:05 mro kernel: [    1.194677] zbud: loaded
Jan  1 00:00:05 mro kernel: [    1.196393] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:05 mro kernel: [    1.197104] NFS: Registering the id_resolver key type
Jan  1 00:00:05 mro kernel: [    1.197178] Key type id_resolver registered
Jan  1 00:00:05 mro kernel: [    1.197201] Key type id_legacy registered
Jan  1 00:00:05 mro kernel: [    1.197324] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan  1 00:00:05 mro kernel: [    1.197351] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Jan  1 00:00:05 mro kernel: [    1.198488] Key type asymmetric registered
Jan  1 00:00:05 mro kernel: [    1.198516] Asymmetric key parser 'x509' registered
Jan  1 00:00:05 mro kernel: [    1.198574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Jan  1 00:00:05 mro kernel: [    1.198835] io scheduler mq-deadline registered
Jan  1 00:00:05 mro kernel: [    1.198860] io scheduler kyber registered
Jan  1 00:00:05 mro kernel: [    1.203018] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
Jan  1 00:00:05 mro kernel: [    1.203065] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
Jan  1 00:00:05 mro kernel: [    1.203153] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
Jan  1 00:00:05 mro kernel: [    1.203247] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
Jan  1 00:00:05 mro kernel: [    1.267025] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
Jan  1 00:00:05 mro kernel: [    1.267421] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
Jan  1 00:00:05 mro kernel: [    1.267453] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  1 00:00:05 mro kernel: [    1.267481] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
Jan  1 00:00:05 mro kernel: [    1.267584] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
Jan  1 00:00:05 mro kernel: [    1.267838] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 00:00:05 mro kernel: [    1.271458] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan  1 00:00:05 mro kernel: [    1.271860] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
Jan  1 00:00:05 mro kernel: [    1.271994] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
Jan  1 00:00:05 mro kernel: [    1.272427] pci 0000:01:00.0: PME# supported from D0 D3hot
Jan  1 00:00:05 mro kernel: [    1.284135] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan  1 00:00:05 mro kernel: [    1.284192] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
Jan  1 00:00:05 mro kernel: [    1.284224] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
Jan  1 00:00:05 mro kernel: [    1.284276] pci 0000:00:00.0: PCI bridge to [bus 01]
Jan  1 00:00:05 mro kernel: [    1.284308] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
Jan  1 00:00:05 mro kernel: [    1.284951] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
Jan  1 00:00:05 mro kernel: [    1.284998] bcm2708_fb: probe of soc:fb failed with error -2
Jan  1 00:00:05 mro kernel: [    1.292091] iproc-rng200 fe104000.rng: hwrng registered
Jan  1 00:00:05 mro kernel: [    1.292444] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jan  1 00:00:05 mro kernel: [    1.293371] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
Jan  1 00:00:05 mro kernel: [    1.293798] cacheinfo: Unable to detect cache hierarchy for CPU 0
Jan  1 00:00:05 mro kernel: [    1.305056] brd: module loaded
Jan  1 00:00:05 mro kernel: [    1.317514] loop: module loaded
Jan  1 00:00:05 mro kernel: [    1.319090] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:05 mro kernel: [    1.322351] libphy: Fixed MDIO Bus: probed
Jan  1 00:00:05 mro kernel: [    1.323894] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
Jan  1 00:00:05 mro kernel: [    1.332993] libphy: bcmgenet MII bus: probed
Jan  1 00:00:05 mro kernel: [    1.381074] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
Jan  1 00:00:05 mro kernel: [    1.382201] usbcore: registered new interface driver r8152
Jan  1 00:00:05 mro kernel: [    1.382279] usbcore: registered new interface driver lan78xx
Jan  1 00:00:05 mro kernel: [    1.382354] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:05 mro kernel: [    1.429836] pci 0000:00:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:05 mro kernel: [    1.430038] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:05 mro kernel: [    1.430084] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:05 mro kernel: [    1.430835] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
Jan  1 00:00:05 mro kernel: [    1.432131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Jan  1 00:00:05 mro kernel: [    1.432165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:05 mro kernel: [    1.432192] usb usb1: Product: xHCI Host Controller
Jan  1 00:00:05 mro kernel: [    1.432215] usb usb1: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:05 mro kernel: [    1.432237] usb usb1: SerialNumber: 0000:01:00.0
Jan  1 00:00:05 mro kernel: [    1.433045] hub 1-0:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    1.433162] hub 1-0:1.0: 1 port detected
Jan  1 00:00:05 mro kernel: [    1.433788] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:05 mro kernel: [    1.433823] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
Jan  1 00:00:05 mro kernel: [    1.433862] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
Jan  1 00:00:05 mro kernel: [    1.434274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
Jan  1 00:00:05 mro kernel: [    1.434305] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:05 mro kernel: [    1.434331] usb usb2: Product: xHCI Host Controller
Jan  1 00:00:05 mro kernel: [    1.434353] usb usb2: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:05 mro kernel: [    1.434376] usb usb2: SerialNumber: 0000:01:00.0
Jan  1 00:00:05 mro kernel: [    1.435011] hub 2-0:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    1.435099] hub 2-0:1.0: 4 ports detected
Jan  1 00:00:05 mro kernel: [    1.436572] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:05 mro kernel: [    1.437453] usbcore: registered new interface driver uas
Jan  1 00:00:05 mro kernel: [    1.437568] usbcore: registered new interface driver usb-storage
Jan  1 00:00:05 mro kernel: [    1.437770] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:05 mro kernel: [    1.439603] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Jan  1 00:00:05 mro kernel: [    1.442945] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:05 mro kernel: [    1.442975] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:05 mro kernel: [    1.443642] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
Jan  1 00:00:05 mro kernel: [    1.444163] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:05 mro kernel: [    1.447086] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:05 mro kernel: [    1.447423] hid: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:05 mro kernel: [    1.447636] usbcore: registered new interface driver usbhid
Jan  1 00:00:05 mro kernel: [    1.447660] usbhid: USB HID core driver
Jan  1 00:00:05 mro kernel: [    1.455499] Initializing XFRM netlink socket
Jan  1 00:00:05 mro kernel: [    1.455568] NET: Registered protocol family 17
Jan  1 00:00:05 mro kernel: [    1.455697] Key type dns_resolver registered
Jan  1 00:00:05 mro kernel: [    1.456263] registered taskstats version 1
Jan  1 00:00:05 mro kernel: [    1.456312] Loading compiled-in X.509 certificates
Jan  1 00:00:05 mro kernel: [    1.456861] Key type ._fscrypt registered
Jan  1 00:00:05 mro kernel: [    1.456886] Key type .fscrypt registered
Jan  1 00:00:05 mro kernel: [    1.456960] Key type fscrypt-provisioning registered
Jan  1 00:00:05 mro kernel: [    1.468235] uart-pl011 fe201000.serial: there is not valid maps for state default
Jan  1 00:00:05 mro kernel: [    1.468543] uart-pl011 fe201000.serial: cts_event_workaround enabled
Jan  1 00:00:05 mro kernel: [    1.468671] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
Jan  1 00:00:05 mro kernel: [    2.736866] printk: console [ttyAMA0] enabled
Jan  1 00:00:05 mro kernel: [    2.748436] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Jan  1 00:00:05 mro kernel: [    2.756662] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jan  1 00:00:05 mro kernel: [    2.762708] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
Jan  1 00:00:05 mro kernel: [    2.797189] of_cfs_init
Jan  1 00:00:05 mro kernel: [    2.799770] of_cfs_init: OK
Jan  1 00:00:05 mro kernel: [    2.803941] uart-pl011 fe201000.serial: no DMA platform data
Jan  1 00:00:05 mro kernel: [    2.826773] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 00:00:05 mro kernel: [    2.832867] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
Jan  1 00:00:05 mro kernel: [    2.843773] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:05 mro kernel: [    2.843931] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:05 mro kernel: [    2.860707] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:05 mro kernel: [    2.869259] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 00:00:05 mro kernel: [    2.876427] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:05 mro kernel: [    2.911298] random: fast init done
Jan  1 00:00:05 mro kernel: [    2.946131] mmc0: new ultra high speed DDR50 SDXC card at address 59b4
Jan  1 00:00:05 mro kernel: [    2.954468] mmcblk0: mmc0:59b4 SD64G 59.4 GiB
Jan  1 00:00:05 mro kernel: [    2.961136] mmc1: new high speed SDIO card at address 0001
Jan  1 00:00:05 mro kernel: [    2.962953]  mmcblk0: p1 p2
Jan  1 00:00:05 mro kernel: [    2.984981] usb 1-1: new high-speed USB device number 2 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    3.000995] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:05 mro kernel: [    3.009246] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:05 mro kernel: [    3.017635] devtmpfs: mounted
Jan  1 00:00:05 mro kernel: [    3.030070] Freeing unused kernel memory: 3712K
Jan  1 00:00:05 mro kernel: [    3.034814] Run /sbin/init as init process
Jan  1 00:00:05 mro kernel: [    3.139584] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
Jan  1 00:00:05 mro kernel: [    3.147871] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    3.155042] usb 1-1: Product: USB2.0 Hub
Jan  1 00:00:05 mro kernel: [    3.161142] hub 1-1:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    3.165153] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:05 mro kernel: [    3.265208] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    3.290464] usb 2-2: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
Jan  1 00:00:05 mro kernel: [    3.298689] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
Jan  1 00:00:05 mro kernel: [    3.305856] usb 2-2: Product: USB 10/100/1000 LAN
Jan  1 00:00:05 mro kernel: [    3.310586] usb 2-2: Manufacturer: TP-Link
Jan  1 00:00:05 mro kernel: [    3.314707] usb 2-2: SerialNumber: 000001
Jan  1 00:00:05 mro kernel: [    3.453710] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    3.512472] r8152 2-2:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2
Jan  1 00:00:05 mro kernel: [    3.521154] r8152 2-2:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2)
Jan  1 00:00:05 mro kernel: [    3.560970] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    3.568957] r8152 2-2:1.0 eth1: v1.12.11
Jan  1 00:00:05 mro kernel: [    3.677453] usb 1-1.1: New USB device found, idVendor=1546, idProduct=01a7, bcdDevice= 1.00
Jan  1 00:00:05 mro kernel: [    3.685857] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    3.693198] usb 1-1.1: Product: u-blox 7 - GPS/GNSS Receiver
Jan  1 00:00:05 mro kernel: [    3.698893] usb 1-1.1: Manufacturer: u-blox AG - www.u-blox.com
Jan  1 00:00:05 mro kernel: [    3.788983] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    3.893546] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
Jan  1 00:00:05 mro kernel: [    3.901958] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    3.909306] usb 1-1.3: Product: USB 2.0 Hub
Jan  1 00:00:05 mro kernel: [    3.915098] hub 1-1.3:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    3.919193] hub 1-1.3:1.0: 4 ports detected
Jan  1 00:00:05 mro kernel: [    4.308978] usb 1-1.3.4: new high-speed USB device number 5 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    4.513536] usb 1-1.3.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
Jan  1 00:00:05 mro kernel: [    4.522125] usb 1-1.3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    4.529638] usb 1-1.3.4: Product: USB 2.0 Hub
Jan  1 00:00:05 mro kernel: [    4.535650] hub 1-1.3.4:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    4.539961] hub 1-1.3.4:1.0: 4 ports detected
Jan  1 00:00:05 mro kernel: [    4.668461] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jan  1 00:00:05 mro kernel: [    4.933059] usb 1-1.3.4.4: new high-speed USB device number 6 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    5.021915] PPP generic driver version 2.4.2
Jan  1 00:00:05 mro kernel: [    5.039284] PPP Deflate Compression module registered
Jan  1 00:00:05 mro kernel: [    5.092260] PPP BSD Compression module registered
Jan  1 00:00:05 mro kernel: [    5.137545] usb 1-1.3.4.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
Jan  1 00:00:05 mro kernel: [    5.146383] usb 1-1.3.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:05 mro kernel: [    5.154072] usb 1-1.3.4.4: Product: USB 2.0 Hub
Jan  1 00:00:05 mro kernel: [    5.160321] hub 1-1.3.4.4:1.0: USB hub found
Jan  1 00:00:05 mro kernel: [    5.164769] hub 1-1.3.4.4:1.0: 4 ports detected
Jan  1 00:00:05 mro sysctl: * Applying /etc/sysctl.conf ...
Jan  1 00:00:05 mro sysctl: kernel.panic = 10
Jan  1 00:00:05 mro sysctl: kernel.panic_on_oops = 1
Jan  1 00:00:05 mro sysctl: kernel.hung_task_panic = 1
Jan  1 00:00:05 mro sysctl: kernel.printk = 4 4 1 7
Jan  1 00:00:05 mro kernel: [    5.556987] usb 1-1.3.4.4.4: new high-speed USB device number 7 using xhci_hcd
Jan  1 00:00:05 mro kernel: [    5.757446] usb 1-1.3.4.4.4: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=1c.83
Jan  1 00:00:05 mro kernel: [    5.757471] usb 1-1.3.4.4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jan  1 00:00:06 mro rsyslogd: [origin software="rsyslogd" swVersion="8.2010.0" x-pid="122" x-info="https://www.rsyslog.com"] start
Jan  1 00:00:07 mro kernel: [    7.570497] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:07 mro kernel: [    7.573033] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:07 mro kernel: [    7.573125] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:07 mro kernel: [    7.981362] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Jan  1 00:00:07 mro kernel: [    7.982131] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Jan  1 00:00:07 mro kernel: [    7.982821] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Jan  1 00:00:07 mro kernel: [    7.983334] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Jan  1 00:00:08 mro kernel: [    8.215649] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:08 mro kernel: [    8.217450] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jan  1 00:00:08 mro kernel: [    8.217474] [vc_sm_connected_init]: start
Jan  1 00:00:08 mro kernel: [    8.218312] [vc_sm_connected_init]: installed successfully
Jan  1 00:00:08 mro kernel: [    8.351448] rtc-pcf8523 1-0068: registered as rtc0
Jun 10 19:09:06 mro kernel: [    8.354955] rtc-pcf8523 1-0068: setting system clock to 2026-06-10T19:09:06 UTC (1781118546)
Jun 10 19:09:06 mro kernel: [    8.462036] mc: Linux media interface: v0.10
Jun 10 19:09:06 mro kernel: [    8.631417] videodev: Linux video capture interface: v2.00
Jun 10 19:09:06 mro kernel: [    8.766727] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
Jun 10 19:09:06 mro kernel: [    8.768030] usbcore: registered new interface driver cdc_acm
Jun 10 19:09:06 mro kernel: [    8.768044] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jun 10 19:09:07 mro kernel: [    9.019456] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jun 10 19:09:07 mro kernel: [    9.019464] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jun 10 19:09:07 mro gpsd.hotplug: add /dev/ttyACM0
Jun 10 19:09:07 mro kernel: [    9.030718] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jun 10 19:09:07 mro kernel: [    9.117291] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Jun 10 19:09:07 mro kernel: [    9.123157] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Jun 10 19:09:07 mro kernel: [    9.123621] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Jun 10 19:09:07 mro kernel: [    9.124021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Jun 10 19:09:07 mro kernel: [    9.124317] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Jun 10 19:09:07 mro kernel: [    9.124345] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Jun 10 19:09:07 mro kernel: [    9.124366] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Jun 10 19:09:07 mro kernel: [    9.124385] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Jun 10 19:09:07 mro kernel: [    9.124410] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Jun 10 19:09:07 mro kernel: [    9.124611] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Jun 10 19:09:07 mro kernel: [    9.145219] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Jun 10 19:09:07 mro kernel: [    9.157083] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Jun 10 19:09:07 mro kernel: [    9.163066] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Jun 10 19:09:07 mro kernel: [    9.163117] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Jun 10 19:09:07 mro kernel: [    9.166158] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Jun 10 19:09:07 mro kernel: [    9.166198] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Jun 10 19:09:07 mro kernel: [    9.170100] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Jun 10 19:09:07 mro kernel: [    9.170147] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Jun 10 19:09:07 mro gpsdctl: gpsd_control(action=add, arg=/dev/ttyACM0)
Jun 10 19:09:07 mro gpsdctl: launching gpsd -n -F /run/gpsd.sock
Jun 10 19:09:07 mro kernel: [    9.449135] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jun 10 19:09:07 mro kernel: [    9.650816] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jun 10 19:09:07 mro kernel: [    9.660147] usbcore: registered new interface driver brcmfmac
Jun 10 19:09:08 mro kernel: [    9.865201] NET: Registered protocol family 10
Jun 10 19:09:08 mro kernel: [    9.866927] Segment Routing with IPv6
Jun 10 19:09:08 mro gpsd[190]: gpsd:ERROR: can't bind to IPv6 port 2947, Cannot assign requested address
Jun 10 19:09:08 mro kernel: [   10.137545] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jun 10 19:09:08 mro kernel: [   10.146332] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Jun 10 19:09:08 mro kernel: [   10.158138] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
Jun 10 19:09:08 mro kernel: [   10.272882] urandom_read: 4 callbacks suppressed
Jun 10 19:09:08 mro kernel: [   10.272896] random: dd: uninitialized urandom read (512 bytes read)
Jun 10 19:09:09 mro kernel: [   10.642065] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
Jun 10 19:09:09 mro kernel: [   10.642148] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
Jun 10 19:09:09 mro wpa_supplicant[231]: Successfully initialized wpa_supplicant
Jun 10 19:09:09 mro kernel: [   11.329841] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Jun 10 19:09:11 mro kernel: [   12.828980] random: crng init done
Jun 10 19:09:11 mro wpa_supplicant[234]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
Jun 10 19:09:11 mro kernel: [   13.153959] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Jun 10 19:09:11 mro kernel: [   13.154405] bcmgenet fd580000.ethernet eth0: Link is Down
Jun 10 19:09:11 mro kernel: [   13.269967] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jun 10 19:09:11 mro kernel: [   13.270606] r8152 2-2:1.0 eth1: carrier on
Jun 10 19:09:12 mro ifplugd(eth0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jun 10 19:09:12 mro ifplugd(eth0): using SIOCETHTOOL detection mode
Jun 10 19:09:12 mro ifplugd(eth0): interface exists
Jun 10 19:09:12 mro ifplugd(eth0): link is down
Jun 10 19:09:12 mro ifplugd(wlan0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jun 10 19:09:12 mro ifplugd(wlan0): using wireless extension detection mode
Jun 10 19:09:12 mro ifplugd(wlan0): interface exists
Jun 10 19:09:12 mro ifplugd(wlan0): link is down
Jun 10 19:09:12 mro ifplugd(eth1): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jun 10 19:09:12 mro ifplugd(eth1): using SIOCETHTOOL detection mode
Jun 10 19:09:12 mro ifplugd(eth1): interface exists
Jun 10 19:09:12 mro ifplugd(eth1): link is up
Jun 10 19:09:12 mro chronyd[331]: chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC -PRIVDROP -SCFILTER -SIGND +ASYNCDNS -NTS -SECHASH +IPV6 -DEBUG)
Jun 10 19:09:12 mro gpsd[335]: gpsd:ERROR: can't bind to IPv4 port 2947, Address already in use
Jun 10 19:09:12 mro gpsd[335]: gpsd:ERROR: maybe gpsd is already running!  Or systemd has the port?
Jun 10 19:09:12 mro gpsd[335]: gpsd:ERROR: SER: /dev/gps0 already opened by another process
Jun 10 19:09:13 mro sshd[346]: Server listening on 0.0.0.0 port 22.
Jun 10 19:09:13 mro sshd[346]: Server listening on :: port 22.
Jun 10 19:09:13 mro rpc.statd[359]: Version 2.3.3 starting
Jun 10 19:09:13 mro sm-notify[360]: Version 2.3.3 starting
Jun 10 19:09:13 mro rpc.statd[359]: Initializing NSM state
Jun 10 19:09:13 mro rpc.statd[359]: Running as root.  chown /run/nfs to choose different user
Jun 10 19:09:13 mro kernel: [   15.363734] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jun 10 19:09:15 mro kernel: [   16.688329] NFSD: Using UMH upcall client tracking operations.
Jun 10 19:09:15 mro kernel: [   16.688357] NFSD: starting 90-second grace period (net f0000081)
Jun 10 19:09:15 mro rpc.mountd[374]: Version 2.3.3 starting
Jun 10 19:09:15 mro su: + none root:news
Jun 10 19:09:15 mro ifplugd(eth0): link is up
Jun 10 19:09:15 mro ifplugd(eth0): executing '/etc/ifplugd/ifplugd.action eth0 up'
Jun 10 19:09:15 mro kernel: [   17.245236] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Jun 10 19:09:15 mro kernel: [   17.245305] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jun 10 19:09:15 mro ifplugd(eth0): exit code: 0
Jun 10 19:09:19 mro : starting pid 462, tty '/dev/console': '/sbin/getty -L  console 0 vt100 '
Jun 10 19:09:19 mro : starting pid 463, tty '/dev/tty1': '/sbin/getty -L  tty1 0 vt100 '
Jun 10 19:09:24 mro chronyd[331]: Selected source 171.66.97.126 (pool.ntp.org)
Jun 10 19:10:09 mro kernel: [   70.707562] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Jun 10 19:10:30 mro chronyd[331]: Selected source 72.14.183.39 (pool.ntp.org)
Jun 10 20:00:01 mro relay-watchdog: Relay flag is still current
Jun 10 20:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 10 21:00:02 mro relay-watchdog: Relay flag is still current
Jun 10 21:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 10 22:00:01 mro relay-watchdog: Relay flag is still current
Jun 10 22:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 10 23:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 10 23:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 00:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 00:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 01:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 01:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 02:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 02:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 03:00:02 mro relay-watchdog: Relay flag is still current
Jun 11 03:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 11 04:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 11 04:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 05:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 11 06:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 11 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 11 07:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 08:00:02 mro relay-watchdog: Relay flag is still current
Jun 11 08:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Jun 11 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 11 09:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 10:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 11 11:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 11:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 12:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 12:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 13:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 13:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 14:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 14:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 15:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 15:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 16:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 16:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 17:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 17:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 18:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 18:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 19:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 19:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 20:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 20:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 21:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 21:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 22:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 22:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 11 23:00:01 mro relay-watchdog: Relay flag is still current
Jun 11 23:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 00:00:02 mro relay-watchdog: Relay flag is still current
Jun 12 00:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 12 01:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 01:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 02:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 02:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 03:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 03:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 04:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 12 04:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 12 05:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 06:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 12 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 12 07:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 08:00:02 mro relay-watchdog: Relay flag is still current
Jun 12 08:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Jun 12 09:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 12 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 12 10:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 11:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 11:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 12:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 12:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 13:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 13:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 14:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 14:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 15:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 15:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 16:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 16:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 17:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 17:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 18:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 18:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 19:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 19:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 20:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 20:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 21:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 21:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 22:00:01 mro relay-watchdog: Relay flag is still current
Jun 12 22:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 12 23:00:02 mro relay-watchdog: Relay flag is still current
Jun 12 23:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 13 00:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 00:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 01:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 01:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 02:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 02:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 03:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 03:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 04:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 13 04:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 13 05:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 06:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 13 07:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 13 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 13 08:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 09:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 13 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 13 10:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 11:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 11:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 12:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 12:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 13:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 13:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 14:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 14:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 15:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 15:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 16:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 16:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 17:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 17:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 18:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 18:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 19:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 19:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 20:00:02 mro relay-watchdog: Relay flag is still current
Jun 13 20:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 13 20:21:30 mro chronyd[331]: Source 23.186.168.126 replaced with 216.82.35.115 (pool.ntp.org)
Jun 13 21:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 21:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 22:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 22:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 13 23:00:01 mro relay-watchdog: Relay flag is still current
Jun 13 23:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 00:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 00:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 01:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 01:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 02:00:02 mro relay-watchdog: Relay flag is still current
Jun 14 02:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 14 03:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 03:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 04:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 04:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 05:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 14 06:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 14 07:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Jun 14 07:00:02 mro relay-watchdog: Relay flag is still current
Jun 14 08:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 14 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 14 09:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 14 10:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 11:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 11:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 12:00:02 mro relay-watchdog: Relay flag is still current
Jun 14 12:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 14 13:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 13:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 14:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 14:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 15:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 15:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 16:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 16:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 17:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 17:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 18:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 18:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 19:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 19:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 20:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 20:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 21:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 21:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 22:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 22:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 14 23:00:01 mro relay-watchdog: Relay flag is still current
Jun 14 23:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 00:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 00:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 01:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 01:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 02:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 15 02:00:02 mro relay-watchdog: Relay flag is still current
Jun 15 03:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 03:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 04:00:02 mro relay-watchdog: Relay flag is still current
Jun 15 04:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 15 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 15 05:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 15 06:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 15 07:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 08:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 15 09:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 15 10:00:02 mro relay-watchdog: Relay flag is still current
Jun 15 10:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Jun 15 11:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 11:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 12:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 15 12:00:02 mro relay-watchdog: Relay flag is still current
Jun 15 13:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 13:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 14:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 14:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 15:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 15:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 16:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 16:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 17:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 17:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 18:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 18:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 19:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 19:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 20:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 15 20:00:02 mro relay-watchdog: Relay flag is still current
Jun 15 21:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 21:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 22:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 22:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 23:00:01 mro relay-watchdog: Relay flag is still current
Jun 15 23:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 15 23:25:56 mro chronyd[331]: Source 216.82.35.115 replaced with 157.245.125.229 (pool.ntp.org)
Jun 16 00:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 00:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 01:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 01:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 02:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 02:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 03:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 03:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 04:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 04:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 16 05:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 16 06:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 07:00:02 mro exchange-watchdog: Keepalive flags found, skipping
Jun 16 07:00:02 mro relay-watchdog: Relay flag is still current
Jun 16 08:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 16 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 16 09:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 10:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 16 11:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 11:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 12:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 12:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 13:00:02 mro relay-watchdog: Relay flag is still current
Jun 16 13:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 16 14:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 14:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 15:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 15:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 16:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 16:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 17:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 17:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 18:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 18:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 19:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 19:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 20:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 20:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 21:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 21:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 22:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 22:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 16 23:00:01 mro relay-watchdog: Relay flag is still current
Jun 16 23:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 00:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 00:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 01:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 01:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 02:00:02 mro relay-watchdog: Relay flag is still current
Jun 17 02:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 17 03:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 03:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 04:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 04:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 05:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 05:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 17 06:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 17 06:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 07:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 17 07:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 08:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 17 08:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 09:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 09:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 17 10:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 10:00:01 mro exchange-watchdog: Keepalive flags found, skipping
Jun 17 11:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 11:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 12:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 12:00:02 mro exchange-watchdog: Exchange flag is still current
Jun 17 13:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 13:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 14:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 14:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 15:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 15:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 16:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 16:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 17:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 17:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 18:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 18:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 19:00:01 mro relay-watchdog: Relay flag is still current
Jun 17 19:00:01 mro exchange-watchdog: Exchange flag is still current
Jun 17 19:09:01 mro cron.flagwatchdog: Reboot system flag detected
Jun 17 19:09:01 mro cron.flagwatchdog: Rebooting system
Jun 17 19:09:01 mro : starting pid 3381, tty '': '/etc/init.d/rcK'
Jun 17 19:09:17 mro su: + none root:news
Jun 17 19:09:42 mro rpc.mountd[374]: Caught signal 15, un-registering and exiting.
Jun 17 19:09:42 mro sshd[346]: Received signal 15; terminating.
Jun 17 19:09:42 mro chronyd[331]: chronyd exiting
Jun 17 19:09:42 mro ifplugd(eth0): exiting
Jun 17 19:09:42 mro ifplugd(wlan0): exiting
Jun 17 19:09:42 mro ifplugd(eth1): exiting
Jun 17 19:09:44 mro kernel: [604852.548826] bcmgenet fd580000.ethernet eth0: Link is Down
Jun 17 19:09:44 mro wpa_supplicant[234]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Jun 17 19:09:44 mro wpa_supplicant[234]: p2p-dev-wlan0: CTRL-EVENT-TERMINATING 
Jun 17 19:09:44 mro wpa_supplicant[234]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
