Jan  1 00:00:03 mto kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.000000] Linux version 5.10.36-v8 (valentic@cambria.valentic.net) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot v1.11-dirty) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Wed Apr 13 15:42:39 PDT 2022
Jan  1 00:00:03 mto kernel: [    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
Jan  1 00:00:03 mto kernel: [    0.000000] efi: UEFI not found.
Jan  1 00:00:03 mto kernel: [    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
Jan  1 00:00:03 mto kernel: [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Jan  1 00:00:03 mto kernel: [    0.000000] Zone ranges:
Jan  1 00:00:03 mto kernel: [    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
Jan  1 00:00:03 mto kernel: [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 mto kernel: [    0.000000]   Normal   empty
Jan  1 00:00:03 mto kernel: [    0.000000] Movable zone start for each node
Jan  1 00:00:03 mto kernel: [    0.000000] Early memory node ranges
Jan  1 00:00:03 mto kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000039bfffff]
Jan  1 00:00:03 mto kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 mto kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
Jan  1 00:00:03 mto kernel: [    0.000000] percpu: Embedded 32 pages/cpu s91224 r8192 d31656 u131072
Jan  1 00:00:03 mto kernel: [    0.000000] Detected PIPT I-cache on CPU0
Jan  1 00:00:03 mto kernel: [    0.000000] CPU features: detected: Spectre-v2
Jan  1 00:00:03 mto kernel: [    0.000000] CPU features: detected: Spectre-v4
Jan  1 00:00:03 mto kernel: [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Jan  1 00:00:03 mto kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990864
Jan  1 00:00:03 mto kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:D6:1F:7D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200
Jan  1 00:00:03 mto kernel: [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Jan  1 00:00:03 mto kernel: [    0.000000] software IO TLB: mapped [mem 0x0000000035c00000-0x0000000039c00000] (64MB)
Jan  1 00:00:03 mto kernel: [    0.000000] Memory: 3792268K/4026368K available (11264K kernel code, 1928K rwdata, 3972K rodata, 3712K init, 1242K bss, 168564K reserved, 65536K cma-reserved)
Jan  1 00:00:03 mto kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:03 mto kernel: [    0.000000] ftrace: allocating 36633 entries in 144 pages
Jan  1 00:00:03 mto kernel: [    0.000000] ftrace: allocated 144 pages with 2 groups
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: Preemptible hierarchical RCU implementation.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: 	RCU event tracing is enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Jan  1 00:00:03 mto kernel: [    0.000000] 	Trampoline variant of Tasks RCU enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] 	Rude variant of Tasks RCU enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan  1 00:00:03 mto kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Jan  1 00:00:03 mto kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Jan  1 00:00:03 mto kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0
Jan  1 00:00:03 mto kernel: [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
Jan  1 00:00:03 mto kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
Jan  1 00:00:03 mto kernel: [    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Jan  1 00:00:03 mto kernel: [    0.000257] Console: colour dummy device 80x25
Jan  1 00:00:03 mto kernel: [    0.000784] printk: console [tty1] enabled
Jan  1 00:00:03 mto kernel: [    0.000843] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
Jan  1 00:00:03 mto kernel: [    0.000885] pid_max: default: 32768 minimum: 301
Jan  1 00:00:03 mto kernel: [    0.001038] LSM: Security Framework initializing
Jan  1 00:00:03 mto kernel: [    0.001278] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.001358] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.002761] Disabling memory control group subsystem
Jan  1 00:00:03 mto kernel: [    0.005001] rcu: Hierarchical SRCU implementation.
Jan  1 00:00:03 mto kernel: [    0.006053] EFI services will not be available.
Jan  1 00:00:03 mto kernel: [    0.006567] smp: Bringing up secondary CPUs ...
Jan  1 00:00:03 mto kernel: [    0.007553] Detected PIPT I-cache on CPU1
Jan  1 00:00:03 mto kernel: [    0.007631] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.008806] Detected PIPT I-cache on CPU2
Jan  1 00:00:03 mto kernel: [    0.008853] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.009937] Detected PIPT I-cache on CPU3
Jan  1 00:00:03 mto kernel: [    0.009983] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.010132] smp: Brought up 1 node, 4 CPUs
Jan  1 00:00:03 mto kernel: [    0.010222] SMP: Total of 4 processors activated.
Jan  1 00:00:03 mto kernel: [    0.010246] CPU features: detected: 32-bit EL0 Support
Jan  1 00:00:03 mto kernel: [    0.010268] CPU features: detected: CRC32 instructions
Jan  1 00:00:03 mto kernel: [    0.010291] CPU features: detected: 32-bit EL1 Support
Jan  1 00:00:03 mto kernel: [    0.045763] CPU: All CPU(s) started at EL2
Jan  1 00:00:03 mto kernel: [    0.045847] alternatives: patching kernel code
Jan  1 00:00:03 mto kernel: [    0.047444] devtmpfs: initialized
Jan  1 00:00:03 mto kernel: [    0.057950] Enabled cp15_barrier support
Jan  1 00:00:03 mto kernel: [    0.058018] Enabled setend support
Jan  1 00:00:03 mto kernel: [    0.058237] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan  1 00:00:03 mto kernel: [    0.058285] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.060397] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:03 mto kernel: [    0.061227] DMI not present or invalid.
Jan  1 00:00:03 mto kernel: [    0.061614] NET: Registered protocol family 16
Jan  1 00:00:03 mto kernel: [    0.064724] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Jan  1 00:00:03 mto kernel: [    0.065006] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Jan  1 00:00:03 mto kernel: [    0.065938] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Jan  1 00:00:03 mto kernel: [    0.066052] audit: initializing netlink subsys (disabled)
Jan  1 00:00:03 mto kernel: [    0.066458] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1
Jan  1 00:00:03 mto kernel: [    0.066957] thermal_sys: Registered thermal governor 'step_wise'
Jan  1 00:00:03 mto kernel: [    0.067414] cpuidle: using governor menu
Jan  1 00:00:03 mto kernel: [    0.067741] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Jan  1 00:00:03 mto kernel: [    0.067926] ASID allocator initialised with 65536 entries
Jan  1 00:00:03 mto kernel: [    0.068073] Serial: AMBA PL011 UART driver
Jan  1 00:00:03 mto kernel: [    0.096564] bcm2835-mbox fe00b880.mailbox: mailbox enabled
Jan  1 00:00:03 mto kernel: [    0.104314] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
Jan  1 00:00:03 mto kernel: [    0.108309] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
Jan  1 00:00:03 mto kernel: [    0.141928] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
Jan  1 00:00:03 mto kernel: [    0.145830] vgaarb: loaded
Jan  1 00:00:03 mto kernel: [    0.146260] SCSI subsystem initialized
Jan  1 00:00:03 mto kernel: [    0.146482] usbcore: registered new interface driver usbfs
Jan  1 00:00:03 mto kernel: [    0.146559] usbcore: registered new interface driver hub
Jan  1 00:00:03 mto kernel: [    0.146637] usbcore: registered new device driver usb
Jan  1 00:00:03 mto kernel: [    0.146964] usb_phy_generic phy: supply vcc not found, using dummy regulator
Jan  1 00:00:03 mto kernel: [    0.148789] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:03 mto kernel: [    1.167838] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:03 mto kernel: [    1.167956] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan  1 00:00:03 mto kernel: [    1.168129] FS-Cache: Loaded
Jan  1 00:00:03 mto kernel: [    1.168375] CacheFiles: Loaded
Jan  1 00:00:03 mto kernel: [    1.178809] NET: Registered protocol family 2
Jan  1 00:00:03 mto kernel: [    1.180004] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.180080] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.180327] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.180843] TCP: Hash tables configured (established 32768 bind 32768)
Jan  1 00:00:03 mto kernel: [    1.181101] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.181190] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.181543] NET: Registered protocol family 1
Jan  1 00:00:03 mto kernel: [    1.182456] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:03 mto kernel: [    1.182486] RPC: Registered udp transport module.
Jan  1 00:00:03 mto kernel: [    1.182507] RPC: Registered tcp transport module.
Jan  1 00:00:03 mto kernel: [    1.182527] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:03 mto kernel: [    1.182559] PCI: CLS 0 bytes, default 64
Jan  1 00:00:03 mto kernel: [    1.184861] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
Jan  1 00:00:03 mto kernel: [    1.185160] kvm [1]: IPA Size Limit: 44 bits
Jan  1 00:00:03 mto kernel: [    1.186348] kvm [1]: vgic interrupt IRQ9
Jan  1 00:00:03 mto kernel: [    1.186639] kvm [1]: Hyp mode initialized successfully
Jan  1 00:00:03 mto kernel: [    1.188836] Initialise system trusted keyrings
Jan  1 00:00:03 mto kernel: [    1.189209] workingset: timestamp_bits=46 max_order=20 bucket_order=0
Jan  1 00:00:03 mto kernel: [    1.195362] zbud: loaded
Jan  1 00:00:03 mto kernel: [    1.197172] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:03 mto kernel: [    1.197831] NFS: Registering the id_resolver key type
Jan  1 00:00:03 mto kernel: [    1.197894] Key type id_resolver registered
Jan  1 00:00:03 mto kernel: [    1.197916] Key type id_legacy registered
Jan  1 00:00:03 mto kernel: [    1.198039] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan  1 00:00:03 mto kernel: [    1.198066] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Jan  1 00:00:03 mto kernel: [    1.199201] Key type asymmetric registered
Jan  1 00:00:03 mto kernel: [    1.199228] Asymmetric key parser 'x509' registered
Jan  1 00:00:03 mto kernel: [    1.199286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Jan  1 00:00:03 mto kernel: [    1.199538] io scheduler mq-deadline registered
Jan  1 00:00:03 mto kernel: [    1.199563] io scheduler kyber registered
Jan  1 00:00:03 mto kernel: [    1.203712] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
Jan  1 00:00:03 mto kernel: [    1.203759] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
Jan  1 00:00:03 mto kernel: [    1.203845] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
Jan  1 00:00:03 mto kernel: [    1.203939] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
Jan  1 00:00:03 mto kernel: [    1.266885] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
Jan  1 00:00:03 mto kernel: [    1.267276] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
Jan  1 00:00:03 mto kernel: [    1.267307] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  1 00:00:03 mto kernel: [    1.267344] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
Jan  1 00:00:03 mto kernel: [    1.267447] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
Jan  1 00:00:03 mto kernel: [    1.267701] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 00:00:03 mto kernel: [    1.271327] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan  1 00:00:03 mto kernel: [    1.271705] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
Jan  1 00:00:03 mto kernel: [    1.271839] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
Jan  1 00:00:03 mto kernel: [    1.272275] pci 0000:01:00.0: PME# supported from D0 D3hot
Jan  1 00:00:03 mto kernel: [    1.283986] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan  1 00:00:03 mto kernel: [    1.284044] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 mto kernel: [    1.284078] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
Jan  1 00:00:03 mto kernel: [    1.284130] pci 0000:00:00.0: PCI bridge to [bus 01]
Jan  1 00:00:03 mto kernel: [    1.284162] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 mto kernel: [    1.284809] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
Jan  1 00:00:03 mto kernel: [    1.284857] bcm2708_fb: probe of soc:fb failed with error -2
Jan  1 00:00:03 mto kernel: [    1.291945] iproc-rng200 fe104000.rng: hwrng registered
Jan  1 00:00:03 mto kernel: [    1.292299] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jan  1 00:00:03 mto kernel: [    1.293269] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
Jan  1 00:00:03 mto kernel: [    1.293693] cacheinfo: Unable to detect cache hierarchy for CPU 0
Jan  1 00:00:03 mto kernel: [    1.305086] brd: module loaded
Jan  1 00:00:03 mto kernel: [    1.317665] loop: module loaded
Jan  1 00:00:03 mto kernel: [    1.319270] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:03 mto kernel: [    1.322528] libphy: Fixed MDIO Bus: probed
Jan  1 00:00:03 mto kernel: [    1.324076] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
Jan  1 00:00:03 mto kernel: [    1.336813] libphy: bcmgenet MII bus: probed
Jan  1 00:00:03 mto kernel: [    1.384922] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
Jan  1 00:00:03 mto kernel: [    1.386036] usbcore: registered new interface driver r8152
Jan  1 00:00:03 mto kernel: [    1.386117] usbcore: registered new interface driver lan78xx
Jan  1 00:00:03 mto kernel: [    1.386194] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:03 mto kernel: [    1.433689] pci 0000:00:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:03 mto kernel: [    1.433901] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.433954] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:03 mto kernel: [    1.434721] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
Jan  1 00:00:03 mto kernel: [    1.436022] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Jan  1 00:00:03 mto kernel: [    1.436056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 mto kernel: [    1.436084] usb usb1: Product: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.436107] usb usb1: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 mto kernel: [    1.436129] usb usb1: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 mto kernel: [    1.436915] hub 1-0:1.0: USB hub found
Jan  1 00:00:03 mto kernel: [    1.437024] hub 1-0:1.0: 1 port detected
Jan  1 00:00:03 mto kernel: [    1.437661] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.437696] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
Jan  1 00:00:03 mto kernel: [    1.437735] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
Jan  1 00:00:03 mto kernel: [    1.438146] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
Jan  1 00:00:03 mto kernel: [    1.438177] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 mto kernel: [    1.438203] usb usb2: Product: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.438225] usb usb2: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 mto kernel: [    1.438248] usb usb2: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 mto kernel: [    1.438898] hub 2-0:1.0: USB hub found
Jan  1 00:00:03 mto kernel: [    1.438976] hub 2-0:1.0: 4 ports detected
Jan  1 00:00:03 mto kernel: [    1.440445] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:03 mto kernel: [    1.441320] usbcore: registered new interface driver uas
Jan  1 00:00:03 mto kernel: [    1.441430] usbcore: registered new interface driver usb-storage
Jan  1 00:00:03 mto kernel: [    1.441636] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:03 mto kernel: [    1.443488] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Jan  1 00:00:03 mto kernel: [    1.446748] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:03 mto kernel: [    1.446778] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:03 mto kernel: [    1.447443] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
Jan  1 00:00:03 mto kernel: [    1.447963] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:03 mto kernel: [    1.451473] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:03 mto kernel: [    1.451757] hid: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:03 mto kernel: [    1.451924] usbcore: registered new interface driver usbhid
Jan  1 00:00:03 mto kernel: [    1.451948] usbhid: USB HID core driver
Jan  1 00:00:03 mto kernel: [    1.459793] Initializing XFRM netlink socket
Jan  1 00:00:03 mto kernel: [    1.459860] NET: Registered protocol family 17
Jan  1 00:00:03 mto kernel: [    1.459991] Key type dns_resolver registered
Jan  1 00:00:03 mto kernel: [    1.460563] registered taskstats version 1
Jan  1 00:00:03 mto kernel: [    1.460605] Loading compiled-in X.509 certificates
Jan  1 00:00:03 mto kernel: [    1.461237] Key type ._fscrypt registered
Jan  1 00:00:03 mto kernel: [    1.461264] Key type .fscrypt registered
Jan  1 00:00:03 mto kernel: [    1.461284] Key type fscrypt-provisioning registered
Jan  1 00:00:03 mto kernel: [    1.472663] uart-pl011 fe201000.serial: there is not valid maps for state default
Jan  1 00:00:03 mto kernel: [    1.473017] uart-pl011 fe201000.serial: cts_event_workaround enabled
Jan  1 00:00:03 mto kernel: [    1.473137] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
Jan  1 00:00:03 mto kernel: [    2.741050] printk: console [ttyAMA0] enabled
Jan  1 00:00:03 mto kernel: [    2.752540] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Jan  1 00:00:03 mto kernel: [    2.760793] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jan  1 00:00:03 mto kernel: [    2.766831] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
Jan  1 00:00:03 mto kernel: [    2.802576] of_cfs_init
Jan  1 00:00:03 mto kernel: [    2.805196] of_cfs_init: OK
Jan  1 00:00:03 mto kernel: [    2.809290] uart-pl011 fe201000.serial: no DMA platform data
Jan  1 00:00:03 mto kernel: [    2.823103] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 00:00:03 mto kernel: [    2.830306] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 mto kernel: [    2.839065] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 mto kernel: [    2.841384] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
Jan  1 00:00:03 mto kernel: [    2.858323] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:03 mto kernel: [    2.866158] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 00:00:03 mto kernel: [    2.876100] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 mto kernel: [    2.915641] random: fast init done
Jan  1 00:00:03 mto kernel: [    2.951185] mmc1: new high speed SDIO card at address 0001
Jan  1 00:00:03 mto kernel: [    2.969678] mmc0: new ultra high speed DDR50 SDXC card at address 0001
Jan  1 00:00:03 mto kernel: [    2.977318] mmcblk0: mmc0:0001 BC2QT 59.6 GiB
Jan  1 00:00:03 mto kernel: [    2.984051]  mmcblk0: p1 p2
Jan  1 00:00:03 mto kernel: [    3.000840] usb 1-1: new high-speed USB device number 2 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.004844] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:03 mto kernel: [    3.015662] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:03 mto kernel: [    3.023257] devtmpfs: mounted
Jan  1 00:00:03 mto kernel: [    3.035661] Freeing unused kernel memory: 3712K
Jan  1 00:00:03 mto kernel: [    3.040413] Run /sbin/init as init process
Jan  1 00:00:03 mto kernel: [    3.163622] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
Jan  1 00:00:03 mto kernel: [    3.171901] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:03 mto kernel: [    3.179084] usb 1-1: Product: USB2.0 Hub
Jan  1 00:00:03 mto kernel: [    3.185032] hub 1-1:1.0: USB hub found
Jan  1 00:00:03 mto kernel: [    3.189157] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:03 mto kernel: [    3.289221] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.314428] usb 2-2: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
Jan  1 00:00:03 mto kernel: [    3.322717] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
Jan  1 00:00:03 mto kernel: [    3.329881] usb 2-2: Product: USB 10/100/1000 LAN
Jan  1 00:00:03 mto kernel: [    3.334609] usb 2-2: Manufacturer: TP-Link
Jan  1 00:00:03 mto kernel: [    3.338728] usb 2-2: SerialNumber: 000001
Jan  1 00:00:03 mto kernel: [    3.382961] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jan  1 00:00:03 mto kernel: [    3.477697] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.513199] PPP generic driver version 2.4.2
Jan  1 00:00:03 mto kernel: [    3.519873] r8152 2-2:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2
Jan  1 00:00:03 mto kernel: [    3.529561] r8152 2-2:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2)
Jan  1 00:00:03 mto kernel: [    3.529763] PPP Deflate Compression module registered
Jan  1 00:00:03 mto kernel: [    3.569645] PPP BSD Compression module registered
Jan  1 00:00:03 mto kernel: [    3.570039] r8152 2-2:1.0 eth1: v1.12.11
Jan  1 00:00:03 mto kernel: [    3.596886] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd
Jan  1 00:00:03 mto sysctl: * Applying /etc/sysctl.conf ...
Jan  1 00:00:03 mto sysctl: kernel.panic = 10
Jan  1 00:00:03 mto sysctl: kernel.panic_on_oops = 1
Jan  1 00:00:03 mto sysctl: kernel.printk = 4 4 1 7
Jan  1 00:00:03 mto kernel: [    3.717346] usb 1-1.4: New USB device found, idVendor=1546, idProduct=01a7, bcdDevice= 1.00
Jan  1 00:00:03 mto kernel: [    3.717374] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 00:00:03 mto kernel: [    3.717388] usb 1-1.4: Product: u-blox 7 - GPS/GNSS Receiver
Jan  1 00:00:03 mto kernel: [    3.717402] usb 1-1.4: Manufacturer: u-blox AG - www.u-blox.com
Jan  1 00:00:04 mto kernel: [    4.032100] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:04 mto kernel: [    4.033715] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:04 mto kernel: [    4.033806] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:04 mto kernel: [    4.236027] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Jan  1 00:00:04 mto kernel: [    4.236743] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Jan  1 00:00:04 mto kernel: [    4.237651] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Jan  1 00:00:04 mto kernel: [    4.238164] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Jan  1 00:00:04 mto kernel: [    4.247155] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.250106] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jan  1 00:00:04 mto kernel: [    4.250150] [vc_sm_connected_init]: start
Jan  1 00:00:04 mto kernel: [    4.251790] [vc_sm_connected_init]: installed successfully
Jan  1 00:00:04 mto kernel: [    4.255207] mc: Linux media interface: v0.10
Jan  1 00:00:04 mto kernel: [    4.289499] videodev: Linux video capture interface: v2.00
Jan  1 00:00:04 mto kernel: [    4.333707] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.334045] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.336032] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.341678] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.344581] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.348088] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.353458] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
Jan  1 00:00:04 mto kernel: [    4.355940] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Jan  1 00:00:04 mto kernel: [    4.357175] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Jan  1 00:00:04 mto kernel: [    4.357359] usbcore: registered new interface driver cdc_acm
Jan  1 00:00:04 mto kernel: [    4.357372] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 00:00:04 mto kernel: [    4.357633] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Jan  1 00:00:04 mto kernel: [    4.357992] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Jan  1 00:00:04 mto kernel: [    4.358027] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Jan  1 00:00:04 mto kernel: [    4.358058] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Jan  1 00:00:04 mto kernel: [    4.358075] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Jan  1 00:00:04 mto kernel: [    4.358091] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Jan  1 00:00:04 mto kernel: [    4.358308] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Jan  1 00:00:04 mto kernel: [    4.362326] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Jan  1 00:00:04 mto kernel: [    4.362387] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Jan  1 00:00:04 mto kernel: [    4.368209] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Jan  1 00:00:04 mto kernel: [    4.368265] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Jan  1 00:00:04 mto kernel: [    4.373371] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Jan  1 00:00:04 mto kernel: [    4.373423] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Jan  1 00:00:04 mto kernel: [    4.431639] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jan  1 00:00:04 mto kernel: [    4.450938] rtc-pcf8523 1-0068: registered as rtc0
Mar 25 18:37:00 mto kernel: [    4.454551] rtc-pcf8523 1-0068: setting system clock to 2026-03-25T18:37:00 UTC (1774463820)
Mar 25 18:37:00 mto gpsd.hotplug: add /dev/ttyACM0
Mar 25 18:37:00 mto gpsdctl: gpsd_control(action=add, arg=/dev/ttyACM0)
Mar 25 18:37:00 mto gpsdctl: launching gpsd -n -F /run/gpsd.sock
Mar 25 18:37:00 mto kernel: [    4.594840] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Mar 25 18:37:00 mto kernel: [    4.632300] NET: Registered protocol family 10
Mar 25 18:37:00 mto kernel: [    4.634480] Segment Routing with IPv6
Mar 25 18:37:00 mto gpsd[190]: gpsd:ERROR: can't bind to IPv6 port 2947, Cannot assign requested address
Mar 25 18:37:00 mto rsyslogd: [origin software="rsyslogd" swVersion="8.2010.0" x-pid="123" x-info="https://www.rsyslog.com"] start
Mar 25 18:37:00 mto kernel: [    4.646085] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Mar 25 18:37:00 mto kernel: [    4.657324] usbcore: registered new interface driver brcmfmac
Mar 25 18:37:00 mto kernel: [    4.835528] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Mar 25 18:37:00 mto kernel: [    4.844318] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Mar 25 18:37:00 mto kernel: [    4.856519] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
Mar 25 18:37:01 mto wpa_supplicant[231]: Successfully initialized wpa_supplicant
Mar 25 18:37:01 mto kernel: [    5.255054] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Mar 25 18:37:03 mto kernel: [    7.244841] random: crng init done
Mar 25 18:37:03 mto kernel: [    7.244866] random: 7 urandom warning(s) missed due to ratelimiting
Mar 25 18:37:03 mto wpa_supplicant[234]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
Mar 25 18:37:03 mto kernel: [    7.551959] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Mar 25 18:37:03 mto kernel: [    7.552590] r8152 2-2:1.0 eth1: carrier on
Mar 25 18:37:04 mto ifplugd(eth0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Mar 25 18:37:04 mto ifplugd(eth0): upping interface
Mar 25 18:37:04 mto ifplugd(eth0): using SIOCETHTOOL detection mode
Mar 25 18:37:04 mto ifplugd(eth0): interface exists
Mar 25 18:37:04 mto kernel: [    8.335356] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Mar 25 18:37:04 mto ifplugd(eth0): link is down
Mar 25 18:37:04 mto kernel: [    8.335804] bcmgenet fd580000.ethernet eth0: Link is Down
Mar 25 18:37:04 mto ifplugd(wlan0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Mar 25 18:37:04 mto ifplugd(wlan0): using wireless extension detection mode
Mar 25 18:37:04 mto ifplugd(wlan0): interface exists
Mar 25 18:37:04 mto ifplugd(wlan0): link is down
Mar 25 18:37:04 mto ifplugd(eth1): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Mar 25 18:37:04 mto ifplugd(eth1): using SIOCETHTOOL detection mode
Mar 25 18:37:04 mto ifplugd(eth1): interface exists
Mar 25 18:37:04 mto ifplugd(eth1): link is up
Mar 25 18:37:04 mto chronyd[324]: chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC -PRIVDROP -SCFILTER -SIGND +ASYNCDNS -NTS -SECHASH +IPV6 -DEBUG)
Mar 25 18:37:04 mto gpsd[328]: gpsd:ERROR: can't bind to IPv4 port 2947, Address already in use
Mar 25 18:37:04 mto gpsd[328]: gpsd:ERROR: maybe gpsd is already running!  Or systemd has the port?
Mar 25 18:37:04 mto gpsd[328]: gpsd:ERROR: SER: /dev/gps0 already opened by another process
Mar 25 18:37:04 mto sshd[338]: Server listening on 0.0.0.0 port 22.
Mar 25 18:37:04 mto sshd[338]: Server listening on :: port 22.
Mar 25 18:37:04 mto rpc.statd[352]: Version 2.3.3 starting
Mar 25 18:37:04 mto sm-notify[353]: Version 2.3.3 starting
Mar 25 18:37:04 mto rpc.statd[352]: Initializing NSM state
Mar 25 18:37:04 mto rpc.statd[352]: Running as root.  chown /run/nfs to choose different user
Mar 25 18:37:04 mto kernel: [    8.837320] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar 25 18:37:05 mto kernel: [    9.975073] NFSD: Using UMH upcall client tracking operations.
Mar 25 18:37:05 mto kernel: [    9.975101] NFSD: starting 90-second grace period (net f0000081)
Mar 25 18:37:06 mto rpc.mountd[367]: Version 2.3.3 starting
Mar 25 18:37:06 mto su: + none root:news
Mar 25 18:37:08 mto ifplugd(eth0): link is up
Mar 25 18:37:08 mto ifplugd(eth0): executing '/etc/ifplugd/ifplugd.action eth0 up'
Mar 25 18:37:08 mto kernel: [   12.413159] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Mar 25 18:37:08 mto kernel: [   12.413229] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mar 25 18:37:08 mto udhcpc[453]: started, v1.33.0
Mar 25 18:37:08 mto udhcpc[453]: sending discover
Mar 25 18:37:08 mto : starting pid 465, tty '/dev/console': '/sbin/getty -L  console 0 vt100 '
Mar 25 18:37:08 mto : starting pid 466, tty '/dev/tty1': '/sbin/getty -L  tty1 0 vt100 '
Mar 25 18:37:11 mto udhcpc[453]: sending discover
Mar 25 18:37:11 mto udhcpc[453]: sending select for 192.168.1.166
Mar 25 18:37:11 mto udhcpc[453]: lease of 192.168.1.166 obtained, lease time 86400
Mar 25 18:37:11 mto ifplugd(eth0): exit code: 0
Mar 25 18:37:37 mto chronyd[324]: Selected source 142.202.190.19 (pool.ntp.org)
Mar 25 18:38:43 mto chronyd[324]: Selected source 141.11.228.173 (pool.ntp.org)
Mar 25 19:00:01 mto relay-watchdog: Relay flag is still current
Mar 25 19:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 25 20:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 25 20:00:01 mto relay-watchdog: Relay flag is still current
Mar 25 21:00:01 mto relay-watchdog: Relay flag is still current
Mar 25 21:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 25 22:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 25 22:00:01 mto relay-watchdog: Relay flag is still current
Mar 25 23:00:01 mto relay-watchdog: Relay flag is still current
Mar 25 23:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 00:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 00:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 01:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 01:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 02:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 02:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 02:33:06 mto kernel: [28570.786549] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
Mar 26 02:33:06 mto kernel: [28570.886926] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Mar 26 02:33:06 mto kernel: [28570.886947] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 26 03:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 03:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 26 04:00:02 mto exchange-watchdog: Keepalive flags found, skipping
Mar 26 04:00:02 mto relay-watchdog: Relay flag is still current
Mar 26 05:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 26 05:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 06:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 26 06:37:11 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 26 06:37:11 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 26 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 26 07:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 08:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 26 08:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 09:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 09:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 26 10:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 26 10:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 10:38:59 mto kernel: [57724.301084] usb 1-1.3: USB disconnect, device number 4
Mar 26 11:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 11:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 12:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 12:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 13:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 13:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 14:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 14:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 15:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 15:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 16:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 16:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 17:00:02 mto relay-watchdog: Relay flag is still current
Mar 26 17:00:02 mto exchange-watchdog: Exchange flag is still current
Mar 26 18:00:02 mto relay-watchdog: Relay flag is still current
Mar 26 18:00:02 mto exchange-watchdog: Exchange flag is still current
Mar 26 18:37:11 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 26 18:37:11 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 26 19:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 19:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 20:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 20:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 21:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 21:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 22:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 22:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 26 23:00:01 mto relay-watchdog: Relay flag is still current
Mar 26 23:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 00:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 00:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 01:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 01:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 02:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 02:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 02:34:51 mto kernel: [115077.226277] usb 1-1.3: new high-speed USB device number 5 using xhci_hcd
Mar 27 02:34:51 mto kernel: [115077.326691] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Mar 27 02:34:51 mto kernel: [115077.326728] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 27 03:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 03:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 27 04:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 27 04:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 05:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 05:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 27 06:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 27 06:37:11 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 27 06:37:11 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 27 07:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 27 08:00:02 mto exchange-watchdog: Keepalive flags found, skipping
Mar 27 08:00:02 mto relay-watchdog: Relay flag is still current
Mar 27 09:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 09:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 27 10:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 10:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 27 10:34:58 mto kernel: [143884.840326] usb 1-1.3: USB disconnect, device number 5
Mar 27 11:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 11:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 12:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 12:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 13:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 13:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 14:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 14:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 15:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 15:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 16:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 16:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 17:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 17:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 18:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 18:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 18:37:11 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 27 18:37:11 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 27 19:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 19:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 20:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 20:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 21:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 21:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 22:00:01 mto relay-watchdog: Relay flag is still current
Mar 27 22:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 23:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 27 23:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 00:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 00:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 01:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 01:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 02:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 02:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 02:36:41 mto kernel: [201588.792826] usb 1-1.3: new high-speed USB device number 6 using xhci_hcd
Mar 28 02:36:41 mto kernel: [201588.893220] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Mar 28 02:36:41 mto kernel: [201588.893243] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 28 03:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 28 03:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 04:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 04:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 28 05:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 05:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 28 06:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 28 06:37:11 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 28 06:37:11 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 28 07:00:02 mto exchange-watchdog: Keepalive flags found, skipping
Mar 28 07:00:02 mto relay-watchdog: Relay flag is still current
Mar 28 08:00:02 mto exchange-watchdog: Keepalive flags found, skipping
Mar 28 08:00:02 mto relay-watchdog: Relay flag is still current
Mar 28 09:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 09:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 28 10:00:02 mto exchange-watchdog: Keepalive flags found, skipping
Mar 28 10:00:02 mto relay-watchdog: Relay flag is still current
Mar 28 10:34:58 mto kernel: [230286.561739] usb 1-1.3: USB disconnect, device number 6
Mar 28 11:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 11:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 12:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 12:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 13:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 13:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 14:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 14:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 15:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 15:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 16:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 16:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 17:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 17:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 18:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 18:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 18:37:11 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 28 18:37:11 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 28 19:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 19:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 20:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 20:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 21:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 21:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 22:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 22:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 28 23:00:01 mto relay-watchdog: Relay flag is still current
Mar 28 23:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 00:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 00:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 01:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 01:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 02:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 02:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 02:38:26 mto kernel: [288095.468125] usb 1-1.3: new high-speed USB device number 7 using xhci_hcd
Mar 29 02:38:26 mto kernel: [288095.568471] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Mar 29 02:38:26 mto kernel: [288095.568493] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 29 03:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 29 03:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 04:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 29 04:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 05:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 29 05:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 29 06:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 06:37:11 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 29 06:37:11 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 29 07:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 29 08:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 08:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 29 09:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 09:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 29 10:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 29 10:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 10:30:59 mto kernel: [316448.860919] usb 1-1.3: USB disconnect, device number 7
Mar 29 11:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 11:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 12:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 12:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 13:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 13:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 14:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 14:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 15:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 15:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 16:00:02 mto relay-watchdog: Relay flag is still current
Mar 29 16:00:02 mto exchange-watchdog: Exchange flag is still current
Mar 29 17:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 17:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 18:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 18:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 18:37:12 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 29 18:37:12 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 29 19:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 19:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 20:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 20:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 21:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 21:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 22:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 22:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 29 23:00:01 mto relay-watchdog: Relay flag is still current
Mar 29 23:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 00:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 00:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 01:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 01:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 02:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 02:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 02:40:16 mto kernel: [374606.750066] usb 1-1.3: new high-speed USB device number 8 using xhci_hcd
Mar 30 02:40:16 mto kernel: [374606.850469] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Mar 30 02:40:16 mto kernel: [374606.850492] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 30 03:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 30 03:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 04:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 04:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 30 05:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 30 05:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 30 06:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 06:37:12 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 30 06:37:12 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 30 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 30 07:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 08:00:02 mto exchange-watchdog: Keepalive flags found, skipping
Mar 30 08:00:02 mto relay-watchdog: Relay flag is still current
Mar 30 09:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 30 09:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 10:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 10:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 30 10:31:04 mto kernel: [402855.422286] usb 1-1.3: USB disconnect, device number 8
Mar 30 11:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 11:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 12:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 12:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 13:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 13:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 14:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 14:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 15:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 15:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 16:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 16:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 17:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 17:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 18:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 18:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 18:37:12 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 30 18:37:12 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 30 19:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 19:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 20:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 20:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 21:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 21:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 22:00:01 mto relay-watchdog: Relay flag is still current
Mar 30 22:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 23:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 30 23:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 00:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 00:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 01:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 01:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 02:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 02:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 02:42:11 mto kernel: [461123.420191] usb 1-1.3: new high-speed USB device number 9 using xhci_hcd
Mar 31 02:42:11 mto kernel: [461123.520594] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Mar 31 02:42:11 mto kernel: [461123.520617] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 31 02:47:18 mto kernel: [461430.157096] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Mar 31 03:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 03:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 31 04:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 04:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 31 05:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 05:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 31 06:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 31 06:37:12 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 31 06:37:12 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 31 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 31 07:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 08:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 31 08:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 09:00:02 mto relay-watchdog: Relay flag is still current
Mar 31 09:00:02 mto exchange-watchdog: Keepalive flags found, skipping
Mar 31 10:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Mar 31 10:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 10:26:59 mto kernel: [489011.850749] usb 1-1.3: USB disconnect, device number 9
Mar 31 11:00:02 mto relay-watchdog: Relay flag is still current
Mar 31 11:00:02 mto exchange-watchdog: Exchange flag is still current
Mar 31 12:00:02 mto relay-watchdog: Relay flag is still current
Mar 31 12:00:02 mto exchange-watchdog: Exchange flag is still current
Mar 31 13:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 13:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 14:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 14:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 15:00:02 mto relay-watchdog: Relay flag is still current
Mar 31 15:00:02 mto exchange-watchdog: Exchange flag is still current
Mar 31 16:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 16:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 17:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 17:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 18:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 18:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 18:37:12 mto udhcpc[485]: sending renew to 192.168.1.1
Mar 31 18:37:12 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Mar 31 19:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 19:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 20:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 20:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 21:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 21:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 22:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 22:00:01 mto exchange-watchdog: Exchange flag is still current
Mar 31 23:00:01 mto relay-watchdog: Relay flag is still current
Mar 31 23:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 00:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 00:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 01:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 01:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 02:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 02:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 02:43:56 mto kernel: [547629.854680] usb 1-1.3: new high-speed USB device number 10 using xhci_hcd
Apr  1 02:43:56 mto kernel: [547629.955117] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Apr  1 02:43:56 mto kernel: [547629.955143] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Apr  1 03:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Apr  1 03:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 04:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Apr  1 04:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 05:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 05:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Apr  1 06:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Apr  1 06:37:12 mto udhcpc[485]: sending renew to 192.168.1.1
Apr  1 06:37:12 mto udhcpc[485]: lease of 192.168.1.166 obtained, lease time 86400
Apr  1 07:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Apr  1 08:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Apr  1 08:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 09:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Apr  1 09:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 10:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Apr  1 10:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 10:22:59 mto kernel: [575173.401700] usb 1-1.3: USB disconnect, device number 10
Apr  1 11:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 11:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 12:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 12:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 13:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 13:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 14:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 14:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 15:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 15:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 16:00:02 mto exchange-watchdog: Exchange flag is still current
Apr  1 16:00:02 mto relay-watchdog: Relay flag is still current
Apr  1 17:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 17:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 18:00:01 mto relay-watchdog: Relay flag is still current
Apr  1 18:00:01 mto exchange-watchdog: Exchange flag is still current
Apr  1 18:34:01 mto cron.flagwatchdog: Reboot system flag detected
Apr  1 18:34:01 mto cron.flagwatchdog: Rebooting system
Apr  1 18:34:01 mto : starting pid 7048, tty '': '/etc/init.d/rcK'
Apr  1 18:34:17 mto su: + none root:news
Apr  1 18:34:42 mto rpc.mountd[367]: Caught signal 15, un-registering and exiting.
Apr  1 18:34:42 mto sshd[338]: Received signal 15; terminating.
Apr  1 18:34:42 mto chronyd[324]: chronyd exiting
Apr  1 18:34:42 mto ifplugd(eth0): exiting
Apr  1 18:34:42 mto ifplugd(wlan0): exiting
Apr  1 18:34:42 mto ifplugd(eth1): exiting
Apr  1 18:34:44 mto wpa_supplicant[234]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Apr  1 18:34:44 mto wpa_supplicant[234]: p2p-dev-wlan0: CTRL-EVENT-TERMINATING 
Apr  1 18:34:44 mto wpa_supplicant[234]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
