Jan  1 00:00:03 mto kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.000000] Linux version 5.10.36-v8 (valentic@cambria.valentic.net) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot v1.11-dirty) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Wed Apr 13 15:42:39 PDT 2022
Jan  1 00:00:03 mto kernel: [    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
Jan  1 00:00:03 mto kernel: [    0.000000] efi: UEFI not found.
Jan  1 00:00:03 mto kernel: [    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
Jan  1 00:00:03 mto kernel: [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Jan  1 00:00:03 mto kernel: [    0.000000] Zone ranges:
Jan  1 00:00:03 mto kernel: [    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
Jan  1 00:00:03 mto kernel: [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 mto kernel: [    0.000000]   Normal   empty
Jan  1 00:00:03 mto kernel: [    0.000000] Movable zone start for each node
Jan  1 00:00:03 mto kernel: [    0.000000] Early memory node ranges
Jan  1 00:00:03 mto kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000039bfffff]
Jan  1 00:00:03 mto kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 mto kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
Jan  1 00:00:03 mto kernel: [    0.000000] percpu: Embedded 32 pages/cpu s91224 r8192 d31656 u131072
Jan  1 00:00:03 mto kernel: [    0.000000] Detected PIPT I-cache on CPU0
Jan  1 00:00:03 mto kernel: [    0.000000] CPU features: detected: Spectre-v2
Jan  1 00:00:03 mto kernel: [    0.000000] CPU features: detected: Spectre-v4
Jan  1 00:00:03 mto kernel: [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Jan  1 00:00:03 mto kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990864
Jan  1 00:00:03 mto kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:D6:1F:7D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200
Jan  1 00:00:03 mto kernel: [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Jan  1 00:00:03 mto kernel: [    0.000000] software IO TLB: mapped [mem 0x0000000035c00000-0x0000000039c00000] (64MB)
Jan  1 00:00:03 mto kernel: [    0.000000] Memory: 3792268K/4026368K available (11264K kernel code, 1928K rwdata, 3972K rodata, 3712K init, 1242K bss, 168564K reserved, 65536K cma-reserved)
Jan  1 00:00:03 mto kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:03 mto kernel: [    0.000000] ftrace: allocating 36633 entries in 144 pages
Jan  1 00:00:03 mto kernel: [    0.000000] ftrace: allocated 144 pages with 2 groups
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: Preemptible hierarchical RCU implementation.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: 	RCU event tracing is enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Jan  1 00:00:03 mto kernel: [    0.000000] 	Trampoline variant of Tasks RCU enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] 	Rude variant of Tasks RCU enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan  1 00:00:03 mto kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Jan  1 00:00:03 mto kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Jan  1 00:00:03 mto kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0
Jan  1 00:00:03 mto kernel: [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
Jan  1 00:00:03 mto kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
Jan  1 00:00:03 mto kernel: [    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Jan  1 00:00:03 mto kernel: [    0.000259] Console: colour dummy device 80x25
Jan  1 00:00:03 mto kernel: [    0.000787] printk: console [tty1] enabled
Jan  1 00:00:03 mto kernel: [    0.000846] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
Jan  1 00:00:03 mto kernel: [    0.000889] pid_max: default: 32768 minimum: 301
Jan  1 00:00:03 mto kernel: [    0.001043] LSM: Security Framework initializing
Jan  1 00:00:03 mto kernel: [    0.001281] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.001360] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.002764] Disabling memory control group subsystem
Jan  1 00:00:03 mto kernel: [    0.005002] rcu: Hierarchical SRCU implementation.
Jan  1 00:00:03 mto kernel: [    0.006048] EFI services will not be available.
Jan  1 00:00:03 mto kernel: [    0.006562] smp: Bringing up secondary CPUs ...
Jan  1 00:00:03 mto kernel: [    0.007545] Detected PIPT I-cache on CPU1
Jan  1 00:00:03 mto kernel: [    0.007623] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.008792] Detected PIPT I-cache on CPU2
Jan  1 00:00:03 mto kernel: [    0.008838] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.009919] Detected PIPT I-cache on CPU3
Jan  1 00:00:03 mto kernel: [    0.009964] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.010112] smp: Brought up 1 node, 4 CPUs
Jan  1 00:00:03 mto kernel: [    0.010202] SMP: Total of 4 processors activated.
Jan  1 00:00:03 mto kernel: [    0.010226] CPU features: detected: 32-bit EL0 Support
Jan  1 00:00:03 mto kernel: [    0.010249] CPU features: detected: CRC32 instructions
Jan  1 00:00:03 mto kernel: [    0.010272] CPU features: detected: 32-bit EL1 Support
Jan  1 00:00:03 mto kernel: [    0.045604] CPU: All CPU(s) started at EL2
Jan  1 00:00:03 mto kernel: [    0.045688] alternatives: patching kernel code
Jan  1 00:00:03 mto kernel: [    0.047265] devtmpfs: initialized
Jan  1 00:00:03 mto kernel: [    0.057756] Enabled cp15_barrier support
Jan  1 00:00:03 mto kernel: [    0.057822] Enabled setend support
Jan  1 00:00:03 mto kernel: [    0.058036] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan  1 00:00:03 mto kernel: [    0.058084] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.060179] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:03 mto kernel: [    0.061004] DMI not present or invalid.
Jan  1 00:00:03 mto kernel: [    0.061386] NET: Registered protocol family 16
Jan  1 00:00:03 mto kernel: [    0.064496] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Jan  1 00:00:03 mto kernel: [    0.064775] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Jan  1 00:00:03 mto kernel: [    0.065702] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Jan  1 00:00:03 mto kernel: [    0.065813] audit: initializing netlink subsys (disabled)
Jan  1 00:00:03 mto kernel: [    0.066222] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1
Jan  1 00:00:03 mto kernel: [    0.066721] thermal_sys: Registered thermal governor 'step_wise'
Jan  1 00:00:03 mto kernel: [    0.067176] cpuidle: using governor menu
Jan  1 00:00:03 mto kernel: [    0.067501] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Jan  1 00:00:03 mto kernel: [    0.067687] ASID allocator initialised with 65536 entries
Jan  1 00:00:03 mto kernel: [    0.067835] Serial: AMBA PL011 UART driver
Jan  1 00:00:03 mto kernel: [    0.096341] bcm2835-mbox fe00b880.mailbox: mailbox enabled
Jan  1 00:00:03 mto kernel: [    0.104318] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
Jan  1 00:00:03 mto kernel: [    0.108312] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
Jan  1 00:00:03 mto kernel: [    0.141855] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
Jan  1 00:00:03 mto kernel: [    0.145747] vgaarb: loaded
Jan  1 00:00:03 mto kernel: [    0.146178] SCSI subsystem initialized
Jan  1 00:00:03 mto kernel: [    0.146400] usbcore: registered new interface driver usbfs
Jan  1 00:00:03 mto kernel: [    0.146476] usbcore: registered new interface driver hub
Jan  1 00:00:03 mto kernel: [    0.146555] usbcore: registered new device driver usb
Jan  1 00:00:03 mto kernel: [    0.146879] usb_phy_generic phy: supply vcc not found, using dummy regulator
Jan  1 00:00:03 mto kernel: [    0.148687] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:03 mto kernel: [    1.167126] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:03 mto kernel: [    1.167245] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan  1 00:00:03 mto kernel: [    1.167417] FS-Cache: Loaded
Jan  1 00:00:03 mto kernel: [    1.167661] CacheFiles: Loaded
Jan  1 00:00:03 mto kernel: [    1.178081] NET: Registered protocol family 2
Jan  1 00:00:03 mto kernel: [    1.179268] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.179340] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.179578] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.180023] TCP: Hash tables configured (established 32768 bind 32768)
Jan  1 00:00:03 mto kernel: [    1.180268] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.180356] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.180775] NET: Registered protocol family 1
Jan  1 00:00:03 mto kernel: [    1.181684] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:03 mto kernel: [    1.181713] RPC: Registered udp transport module.
Jan  1 00:00:03 mto kernel: [    1.181733] RPC: Registered tcp transport module.
Jan  1 00:00:03 mto kernel: [    1.181753] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:03 mto kernel: [    1.181785] PCI: CLS 0 bytes, default 64
Jan  1 00:00:03 mto kernel: [    1.184063] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
Jan  1 00:00:03 mto kernel: [    1.184365] kvm [1]: IPA Size Limit: 44 bits
Jan  1 00:00:03 mto kernel: [    1.185600] kvm [1]: vgic interrupt IRQ9
Jan  1 00:00:03 mto kernel: [    1.185890] kvm [1]: Hyp mode initialized successfully
Jan  1 00:00:03 mto kernel: [    1.188042] Initialise system trusted keyrings
Jan  1 00:00:03 mto kernel: [    1.188409] workingset: timestamp_bits=46 max_order=20 bucket_order=0
Jan  1 00:00:03 mto kernel: [    1.194619] zbud: loaded
Jan  1 00:00:03 mto kernel: [    1.196350] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:03 mto kernel: [    1.197060] NFS: Registering the id_resolver key type
Jan  1 00:00:03 mto kernel: [    1.197119] Key type id_resolver registered
Jan  1 00:00:03 mto kernel: [    1.197141] Key type id_legacy registered
Jan  1 00:00:03 mto kernel: [    1.197267] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan  1 00:00:03 mto kernel: [    1.197294] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Jan  1 00:00:03 mto kernel: [    1.198443] Key type asymmetric registered
Jan  1 00:00:03 mto kernel: [    1.198470] Asymmetric key parser 'x509' registered
Jan  1 00:00:03 mto kernel: [    1.198528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Jan  1 00:00:03 mto kernel: [    1.198785] io scheduler mq-deadline registered
Jan  1 00:00:03 mto kernel: [    1.198811] io scheduler kyber registered
Jan  1 00:00:03 mto kernel: [    1.202999] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
Jan  1 00:00:03 mto kernel: [    1.203047] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
Jan  1 00:00:03 mto kernel: [    1.203134] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
Jan  1 00:00:03 mto kernel: [    1.203227] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
Jan  1 00:00:03 mto kernel: [    1.266781] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
Jan  1 00:00:03 mto kernel: [    1.267166] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
Jan  1 00:00:03 mto kernel: [    1.267197] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  1 00:00:03 mto kernel: [    1.267233] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
Jan  1 00:00:03 mto kernel: [    1.267335] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
Jan  1 00:00:03 mto kernel: [    1.267589] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 00:00:03 mto kernel: [    1.271230] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan  1 00:00:03 mto kernel: [    1.271639] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
Jan  1 00:00:03 mto kernel: [    1.271774] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
Jan  1 00:00:03 mto kernel: [    1.272207] pci 0000:01:00.0: PME# supported from D0 D3hot
Jan  1 00:00:03 mto kernel: [    1.283896] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan  1 00:00:03 mto kernel: [    1.283953] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 mto kernel: [    1.283986] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
Jan  1 00:00:03 mto kernel: [    1.284037] pci 0000:00:00.0: PCI bridge to [bus 01]
Jan  1 00:00:03 mto kernel: [    1.284069] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 mto kernel: [    1.284760] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
Jan  1 00:00:03 mto kernel: [    1.284809] bcm2708_fb: probe of soc:fb failed with error -2
Jan  1 00:00:03 mto kernel: [    1.291755] iproc-rng200 fe104000.rng: hwrng registered
Jan  1 00:00:03 mto kernel: [    1.292109] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jan  1 00:00:03 mto kernel: [    1.293079] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
Jan  1 00:00:03 mto kernel: [    1.293503] cacheinfo: Unable to detect cache hierarchy for CPU 0
Jan  1 00:00:03 mto kernel: [    1.304839] brd: module loaded
Jan  1 00:00:03 mto kernel: [    1.317387] loop: module loaded
Jan  1 00:00:03 mto kernel: [    1.318988] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:03 mto kernel: [    1.322223] libphy: Fixed MDIO Bus: probed
Jan  1 00:00:03 mto kernel: [    1.323765] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
Jan  1 00:00:03 mto kernel: [    1.336704] libphy: bcmgenet MII bus: probed
Jan  1 00:00:03 mto kernel: [    1.384859] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
Jan  1 00:00:03 mto kernel: [    1.385984] usbcore: registered new interface driver r8152
Jan  1 00:00:03 mto kernel: [    1.386065] usbcore: registered new interface driver lan78xx
Jan  1 00:00:03 mto kernel: [    1.386143] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:03 mto kernel: [    1.433588] pci 0000:00:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:03 mto kernel: [    1.433792] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.433848] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:03 mto kernel: [    1.434623] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
Jan  1 00:00:03 mto kernel: [    1.435922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Jan  1 00:00:03 mto kernel: [    1.435955] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 mto kernel: [    1.435982] usb usb1: Product: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.436005] usb usb1: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 mto kernel: [    1.436028] usb usb1: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 mto kernel: [    1.436848] hub 1-0:1.0: USB hub found
Jan  1 00:00:03 mto kernel: [    1.436955] hub 1-0:1.0: 1 port detected
Jan  1 00:00:03 mto kernel: [    1.437590] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.437626] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
Jan  1 00:00:03 mto kernel: [    1.437664] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
Jan  1 00:00:03 mto kernel: [    1.438079] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
Jan  1 00:00:03 mto kernel: [    1.438110] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 mto kernel: [    1.438137] usb usb2: Product: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.438159] usb usb2: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 mto kernel: [    1.438182] usb usb2: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 mto kernel: [    1.438835] hub 2-0:1.0: USB hub found
Jan  1 00:00:03 mto kernel: [    1.438913] hub 2-0:1.0: 4 ports detected
Jan  1 00:00:03 mto kernel: [    1.440388] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:03 mto kernel: [    1.441262] usbcore: registered new interface driver uas
Jan  1 00:00:03 mto kernel: [    1.441377] usbcore: registered new interface driver usb-storage
Jan  1 00:00:03 mto kernel: [    1.441583] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:03 mto kernel: [    1.443435] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Jan  1 00:00:03 mto kernel: [    1.446771] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:03 mto kernel: [    1.446804] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:03 mto kernel: [    1.447474] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
Jan  1 00:00:03 mto kernel: [    1.447998] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:03 mto kernel: [    1.450808] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:03 mto kernel: [    1.451153] hid: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:03 mto kernel: [    1.451372] usbcore: registered new interface driver usbhid
Jan  1 00:00:03 mto kernel: [    1.451397] usbhid: USB HID core driver
Jan  1 00:00:03 mto kernel: [    1.459300] Initializing XFRM netlink socket
Jan  1 00:00:03 mto kernel: [    1.459370] NET: Registered protocol family 17
Jan  1 00:00:03 mto kernel: [    1.459494] Key type dns_resolver registered
Jan  1 00:00:03 mto kernel: [    1.460063] registered taskstats version 1
Jan  1 00:00:03 mto kernel: [    1.460103] Loading compiled-in X.509 certificates
Jan  1 00:00:03 mto kernel: [    1.460732] Key type ._fscrypt registered
Jan  1 00:00:03 mto kernel: [    1.460760] Key type .fscrypt registered
Jan  1 00:00:03 mto kernel: [    1.460780] Key type fscrypt-provisioning registered
Jan  1 00:00:03 mto kernel: [    1.472058] uart-pl011 fe201000.serial: there is not valid maps for state default
Jan  1 00:00:03 mto kernel: [    1.472369] uart-pl011 fe201000.serial: cts_event_workaround enabled
Jan  1 00:00:03 mto kernel: [    1.472498] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
Jan  1 00:00:03 mto kernel: [    2.740576] printk: console [ttyAMA0] enabled
Jan  1 00:00:03 mto kernel: [    2.752054] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Jan  1 00:00:03 mto kernel: [    2.760288] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jan  1 00:00:03 mto kernel: [    2.766332] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
Jan  1 00:00:03 mto kernel: [    2.800807] of_cfs_init
Jan  1 00:00:03 mto kernel: [    2.803393] of_cfs_init: OK
Jan  1 00:00:03 mto kernel: [    2.807558] uart-pl011 fe201000.serial: no DMA platform data
Jan  1 00:00:03 mto kernel: [    2.831354] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 00:00:03 mto kernel: [    2.836473] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
Jan  1 00:00:03 mto kernel: [    2.845590] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:03 mto kernel: [    2.852626] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 mto kernel: [    2.862812] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 mto kernel: [    2.873774] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 00:00:03 mto kernel: [    2.882800] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 mto kernel: [    2.918883] random: fast init done
Jan  1 00:00:03 mto kernel: [    2.957835] mmc1: new high speed SDIO card at address 0001
Jan  1 00:00:03 mto kernel: [    2.965814] mmc0: new ultra high speed DDR50 SDXC card at address 0001
Jan  1 00:00:03 mto kernel: [    2.973362] mmcblk0: mmc0:0001 BC2QT 59.6 GiB
Jan  1 00:00:03 mto kernel: [    2.980041]  mmcblk0: p1 p2
Jan  1 00:00:03 mto kernel: [    2.988727] usb 1-1: new high-speed USB device number 2 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.005538] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Jan  1 00:00:03 mto kernel: [    3.012973] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Jan  1 00:00:03 mto kernel: [    3.143424] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
Jan  1 00:00:03 mto kernel: [    3.151687] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:03 mto kernel: [    3.158862] usb 1-1: Product: USB2.0 Hub
Jan  1 00:00:03 mto kernel: [    3.164721] hub 1-1:1.0: USB hub found
Jan  1 00:00:03 mto kernel: [    3.168810] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:03 mto kernel: [    3.197029] EXT4-fs (mmcblk0p2): recovery complete
Jan  1 00:00:03 mto kernel: [    3.204164] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:03 mto kernel: [    3.212371] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:03 mto kernel: [    3.219975] devtmpfs: mounted
Jan  1 00:00:03 mto kernel: [    3.232346] Freeing unused kernel memory: 3712K
Jan  1 00:00:03 mto kernel: [    3.237093] Run /sbin/init as init process
Jan  1 00:00:03 mto kernel: [    3.273097] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.298276] usb 2-2: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
Jan  1 00:00:03 mto kernel: [    3.306506] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
Jan  1 00:00:03 mto kernel: [    3.313671] usb 2-2: Product: USB 10/100/1000 LAN
Jan  1 00:00:03 mto kernel: [    3.318400] usb 2-2: Manufacturer: TP-Link
Jan  1 00:00:03 mto kernel: [    3.322519] usb 2-2: SerialNumber: 000001
Jan  1 00:00:03 mto kernel: [    3.461566] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.504857] r8152 2-2:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2
Jan  1 00:00:03 mto kernel: [    3.513629] r8152 2-2:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2)
Jan  1 00:00:03 mto kernel: [    3.553851] r8152 2-2:1.0 eth1: v1.12.11
Jan  1 00:00:03 mto kernel: [    3.580722] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.597353] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jan  1 00:00:03 mto kernel: [    3.693236] usb 1-1.4: New USB device found, idVendor=1546, idProduct=01a7, bcdDevice= 1.00
Jan  1 00:00:03 mto kernel: [    3.701670] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 00:00:03 mto kernel: [    3.710055] usb 1-1.4: Product: u-blox 7 - GPS/GNSS Receiver
Jan  1 00:00:03 mto kernel: [    3.715757] usb 1-1.4: Manufacturer: u-blox AG - www.u-blox.com
Jan  1 00:00:03 mto kernel: [    3.738463] PPP generic driver version 2.4.2
Jan  1 00:00:03 mto kernel: [    3.753683] PPP Deflate Compression module registered
Jan  1 00:00:03 mto kernel: [    3.786180] PPP BSD Compression module registered
Jan  1 00:00:03 mto sysctl: * Applying /etc/sysctl.conf ...
Jan  1 00:00:03 mto sysctl: kernel.panic = 10
Jan  1 00:00:03 mto sysctl: kernel.panic_on_oops = 1
Jan  1 00:00:03 mto sysctl: kernel.printk = 4 4 1 7
Jan  1 00:00:04 mto kernel: [    4.251533] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:04 mto kernel: [    4.253085] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:04 mto kernel: [    4.253179] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:04 mto kernel: [    4.438736] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Jan  1 00:00:04 mto kernel: [    4.439307] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Jan  1 00:00:04 mto kernel: [    4.439828] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Jan  1 00:00:04 mto kernel: [    4.440391] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Jan  1 00:00:04 mto kernel: [    4.467070] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.469529] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jan  1 00:00:04 mto kernel: [    4.469556] [vc_sm_connected_init]: start
Jan  1 00:00:04 mto kernel: [    4.477222] [vc_sm_connected_init]: installed successfully
Jan  1 00:00:04 mto kernel: [    4.495296] mc: Linux media interface: v0.10
Jan  1 00:00:04 mto kernel: [    4.536561] videodev: Linux video capture interface: v2.00
Jan  1 00:00:04 mto kernel: [    4.601564] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
Jan  1 00:00:04 mto kernel: [    4.603207] usbcore: registered new interface driver cdc_acm
Jan  1 00:00:04 mto kernel: [    4.603227] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 00:00:04 mto kernel: [    4.620455] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.627774] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jan  1 00:00:04 mto kernel: [    4.631783] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.634403] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.635949] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.638274] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Jan  1 00:00:04 mto kernel: [    4.638331] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Jan  1 00:00:04 mto kernel: [    4.649542] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Jan  1 00:00:04 mto kernel: [    4.649610] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Jan  1 00:00:04 mto kernel: [    4.650264] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Jan  1 00:00:04 mto kernel: [    4.652651] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Jan  1 00:00:04 mto kernel: [    4.653381] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Jan  1 00:00:04 mto kernel: [    4.653939] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Jan  1 00:00:04 mto kernel: [    4.653980] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Jan  1 00:00:04 mto kernel: [    4.653986] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Jan  1 00:00:04 mto kernel: [    4.654006] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Jan  1 00:00:04 mto kernel: [    4.654020] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Jan  1 00:00:04 mto kernel: [    4.654024] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Jan  1 00:00:04 mto kernel: [    4.654040] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Jan  1 00:00:04 mto kernel: [    4.654264] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Jan  1 00:00:04 mto kernel: [    4.686154] rtc-pcf8523 1-0068: registered as rtc0
Jun 28 08:03:04 mto kernel: [    4.689844] rtc-pcf8523 1-0068: setting system clock to 2026-06-28T08:03:04 UTC (1782633784)
Jun 28 08:03:04 mto gpsd.hotplug: add /dev/ttyACM0
Jun 28 08:03:04 mto gpsdctl: gpsd_control(action=add, arg=/dev/ttyACM0)
Jun 28 08:03:04 mto gpsdctl: launching gpsd -n -F /run/gpsd.sock
Jun 28 08:03:04 mto kernel: [    4.790819] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jun 28 08:03:04 mto kernel: [    4.834215] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jun 28 08:03:04 mto kernel: [    4.845567] usbcore: registered new interface driver brcmfmac
Jun 28 08:03:04 mto rsyslogd: [origin software="rsyslogd" swVersion="8.2010.0" x-pid="123" x-info="https://www.rsyslog.com"] start
Jun 28 08:03:04 mto kernel: [    4.881528] NET: Registered protocol family 10
Jun 28 08:03:04 mto kernel: [    4.883528] Segment Routing with IPv6
Jun 28 08:03:04 mto gpsd[191]: gpsd:ERROR: can't bind to IPv6 port 2947, Cannot assign requested address
Jun 28 08:03:04 mto kernel: [    5.032894] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jun 28 08:03:04 mto kernel: [    5.041689] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Jun 28 08:03:04 mto kernel: [    5.053486] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
Jun 28 08:03:05 mto kernel: [    5.266993] urandom_read: 5 callbacks suppressed
Jun 28 08:03:05 mto kernel: [    5.267007] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
Jun 28 08:03:05 mto kernel: [    5.267085] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
Jun 28 08:03:05 mto wpa_supplicant[231]: Successfully initialized wpa_supplicant
Jun 28 08:03:05 mto kernel: [    5.498897] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Jun 28 08:03:07 mto kernel: [    7.420738] random: crng init done
Jun 28 08:03:07 mto wpa_supplicant[234]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
Jun 28 08:03:08 mto ifplugd(eth0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jun 28 08:03:08 mto ifplugd(eth0): upping interface
Jun 28 08:03:08 mto ifplugd(eth0): using SIOCETHTOOL detection mode
Jun 28 08:03:08 mto ifplugd(eth0): interface exists
Jun 28 08:03:08 mto ifplugd(eth0): link is down
Jun 28 08:03:08 mto kernel: [    8.495011] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Jun 28 08:03:08 mto kernel: [    8.495479] bcmgenet fd580000.ethernet eth0: Link is Down
Jun 28 08:03:08 mto ifplugd(wlan0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jun 28 08:03:08 mto ifplugd(wlan0): using wireless extension detection mode
Jun 28 08:03:08 mto ifplugd(wlan0): interface exists
Jun 28 08:03:08 mto ifplugd(wlan0): link is down
Jun 28 08:03:08 mto ifplugd(eth1): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jun 28 08:03:08 mto ifplugd(eth1): using SIOCETHTOOL detection mode
Jun 28 08:03:08 mto ifplugd(eth1): interface exists
Jun 28 08:03:08 mto ifplugd(eth1): link is down
Jun 28 08:03:08 mto chronyd[324]: chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC -PRIVDROP -SCFILTER -SIGND +ASYNCDNS -NTS -SECHASH +IPV6 -DEBUG)
Jun 28 08:03:08 mto gpsd[328]: gpsd:ERROR: can't bind to IPv4 port 2947, Address already in use
Jun 28 08:03:08 mto gpsd[328]: gpsd:ERROR: maybe gpsd is already running!  Or systemd has the port?
Jun 28 08:03:08 mto gpsd[328]: gpsd:ERROR: SER: /dev/gps0 already opened by another process
Jun 28 08:03:08 mto sshd[338]: Server listening on 0.0.0.0 port 22.
Jun 28 08:03:08 mto sshd[338]: Server listening on :: port 22.
Jun 28 08:03:08 mto rpc.statd[352]: Version 2.3.3 starting
Jun 28 08:03:08 mto sm-notify[353]: Version 2.3.3 starting
Jun 28 08:03:08 mto rpc.statd[352]: Initializing NSM state
Jun 28 08:03:08 mto rpc.statd[352]: Running as root.  chown /run/nfs to choose different user
Jun 28 08:03:08 mto kernel: [    8.989354] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jun 28 08:03:09 mto kernel: [   10.131804] NFSD: Using UMH upcall client tracking operations.
Jun 28 08:03:09 mto kernel: [   10.131832] NFSD: starting 90-second grace period (net f0000081)
Jun 28 08:03:09 mto rpc.mountd[367]: Version 2.3.3 starting
Jun 28 08:03:10 mto su: + none root:news
Jun 28 08:03:12 mto ifplugd(eth0): link is up
Jun 28 08:03:12 mto ifplugd(eth0): executing '/etc/ifplugd/ifplugd.action eth0 up'
Jun 28 08:03:12 mto kernel: [   12.573095] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Jun 28 08:03:12 mto kernel: [   12.573167] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jun 28 08:03:12 mto udhcpc[454]: started, v1.33.0
Jun 28 08:03:12 mto udhcpc[454]: sending discover
Jun 28 08:03:12 mto udhcpc[454]: sending select for 192.168.1.166
Jun 28 08:03:12 mto udhcpc[454]: lease of 192.168.1.166 obtained, lease time 86400
Jun 28 08:03:12 mto ifplugd(eth0): exit code: 0
Jun 28 08:03:12 mto : starting pid 476, tty '/dev/console': '/sbin/getty -L  console 0 vt100 '
Jun 28 08:03:12 mto : starting pid 477, tty '/dev/tty1': '/sbin/getty -L  tty1 0 vt100 '
Jun 28 08:03:19 mto kernel: [   20.065781] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Jun 28 08:03:41 mto chronyd[324]: Selected source 144.202.66.214 (pool.ntp.org)
Jun 28 08:03:41 mto chronyd[324]: System clock wrong by -3.346223 seconds
Jun 28 08:03:38 mto chronyd[324]: System clock was stepped by -3.346223 seconds
Jun 28 08:03:41 mto kernel: [   45.076302] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jun 28 08:03:41 mto ifplugd(eth1): link is up
Jun 28 08:03:41 mto ifplugd(eth1): executing '/etc/ifplugd/ifplugd.action eth1 up'
Jun 28 08:03:41 mto kernel: [   45.077291] r8152 2-2:1.0 eth1: carrier on
Jun 28 08:03:41 mto ifplugd(eth1): exit code: 0
Jun 28 08:04:43 mto chronyd[324]: Selected source 171.66.97.126 (pool.ntp.org)
Jun 28 09:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 10:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 11:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 12:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 13:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 14:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 14:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 15:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 15:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 16:00:02 mto relay-watchdog: Relay flag is still current
Jun 28 16:00:02 mto exchange-watchdog: Exchange flag is still current
Jun 28 17:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 17:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 18:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 19:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 19:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 20:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 20:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 20:03:09 mto udhcpc[471]: sending renew to 192.168.1.1
Jun 28 20:03:09 mto udhcpc[471]: lease of 192.168.1.166 obtained, lease time 86400
Jun 28 21:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 21:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 22:00:01 mto relay-watchdog: Relay flag is still current
Jun 28 22:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 28 23:00:02 mto exchange-watchdog: Exchange flag is still current
Jun 28 23:00:02 mto relay-watchdog: Relay flag is still current
Jun 29 00:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 00:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 01:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 01:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 02:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 02:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 03:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 03:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 03:22:58 mto chronyd[324]: Selected source 144.202.66.214 (pool.ntp.org)
Jun 29 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 04:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 05:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 05:47:21 mto kernel: [78266.079420] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
Jun 29 05:47:21 mto kernel: [78266.179809] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jun 29 05:47:21 mto kernel: [78266.179831] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 29 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jun 29 06:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jun 29 07:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 07:22:58 mto kernel: [84003.143634] usb 1-1.3: USB disconnect, device number 4
Jun 29 08:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 08:03:08 mto udhcpc[471]: sending renew to 192.168.1.1
Jun 29 08:03:08 mto udhcpc[471]: lease of 192.168.1.166 obtained, lease time 86400
Jun 29 09:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 10:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 11:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 12:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 13:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 14:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 14:00:02 mto exchange-watchdog: Exchange flag is still current
Jun 29 15:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 15:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 16:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 16:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 17:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 17:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 18:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 19:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 19:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 20:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 20:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 20:03:08 mto udhcpc[471]: sending renew to 192.168.1.1
Jun 29 20:03:08 mto udhcpc[471]: lease of 192.168.1.166 obtained, lease time 86400
Jun 29 21:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 21:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 29 22:00:02 mto exchange-watchdog: Exchange flag is still current
Jun 29 22:00:02 mto relay-watchdog: Relay flag is still current
Jun 29 23:00:01 mto relay-watchdog: Relay flag is still current
Jun 29 23:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 00:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 00:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 01:00:02 mto relay-watchdog: Relay flag is still current
Jun 30 01:00:02 mto exchange-watchdog: Exchange flag is still current
Jun 30 02:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 02:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 03:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 03:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 04:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 05:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 05:45:46 mto kernel: [164572.222446] usb 1-1.3: new high-speed USB device number 5 using xhci_hcd
Jun 30 05:45:46 mto kernel: [164572.322812] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jun 30 05:45:46 mto kernel: [164572.322834] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 30 06:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jun 30 07:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jun 30 07:22:59 mto kernel: [170405.046632] usb 1-1.3: USB disconnect, device number 5
Jun 30 08:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 08:03:08 mto udhcpc[471]: sending renew to 192.168.1.1
Jun 30 08:03:08 mto udhcpc[471]: lease of 192.168.1.166 obtained, lease time 86400
Jun 30 09:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 10:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 11:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 12:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 13:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 14:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 14:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 15:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 15:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 16:00:02 mto relay-watchdog: Relay flag is still current
Jun 30 16:00:02 mto exchange-watchdog: Exchange flag is still current
Jun 30 17:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 17:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 18:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 19:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 19:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 20:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 20:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 20:03:08 mto udhcpc[471]: sending renew to 192.168.1.1
Jun 30 20:03:08 mto udhcpc[471]: lease of 192.168.1.166 obtained, lease time 86400
Jun 30 21:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 21:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 22:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 22:00:01 mto relay-watchdog: Relay flag is still current
Jun 30 23:00:01 mto exchange-watchdog: Exchange flag is still current
Jun 30 23:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 00:00:02 mto relay-watchdog: Relay flag is still current
Jul  1 00:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  1 01:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 01:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 02:00:02 mto relay-watchdog: Relay flag is still current
Jul  1 02:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  1 03:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 03:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 04:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 05:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 05:43:51 mto kernel: [250858.138543] usb 1-1.3: new high-speed USB device number 6 using xhci_hcd
Jul  1 05:43:51 mto kernel: [250858.238929] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jul  1 05:43:51 mto kernel: [250858.238952] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  1 06:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  1 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  1 07:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 07:26:59 mto kernel: [257046.085823] usb 1-1.3: USB disconnect, device number 6
Jul  1 08:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 08:03:08 mto udhcpc[471]: sending renew to 192.168.1.1
Jul  1 08:03:08 mto udhcpc[471]: lease of 192.168.1.166 obtained, lease time 86400
Jul  1 09:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 10:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 11:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  1 11:00:02 mto relay-watchdog: Relay flag is still current
Jul  1 12:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 13:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 14:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 14:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 15:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  1 15:00:02 mto relay-watchdog: Relay flag is still current
Jul  1 16:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 16:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 17:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 17:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 18:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 18:34:01 mto cron.flagwatchdog: Reboot system flag detected
Jul  1 18:34:01 mto cron.flagwatchdog: Rebooting system
Jul  1 18:34:01 mto : starting pid 31685, tty '': '/etc/init.d/rcK'
Jul  1 18:34:16 mto su: + none root:news
Jul  1 18:34:42 mto rpc.mountd[367]: Caught signal 15, un-registering and exiting.
Jul  1 18:34:42 mto sshd[338]: Received signal 15; terminating.
Jul  1 18:34:42 mto chronyd[324]: chronyd exiting
Jul  1 18:34:42 mto ifplugd(eth0): exiting
Jul  1 18:34:42 mto ifplugd(wlan0): exiting
Jul  1 18:34:42 mto ifplugd(eth1): exiting
Jul  1 18:34:43 mto wpa_supplicant[234]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Jul  1 18:34:43 mto wpa_supplicant[234]: p2p-dev-wlan0: CTRL-EVENT-TERMINATING 
Jul  1 18:34:43 mto wpa_supplicant[234]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
