Jan  1 00:00:03 mto kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.000000] Linux version 5.10.36-v8 (valentic@cambria.valentic.net) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot v1.11-dirty) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Wed Apr 13 15:42:39 PDT 2022
Jan  1 00:00:03 mto kernel: [    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.5
Jan  1 00:00:03 mto kernel: [    0.000000] efi: UEFI not found.
Jan  1 00:00:03 mto kernel: [    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
Jan  1 00:00:03 mto kernel: [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Jan  1 00:00:03 mto kernel: [    0.000000] Zone ranges:
Jan  1 00:00:03 mto kernel: [    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
Jan  1 00:00:03 mto kernel: [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 mto kernel: [    0.000000]   Normal   empty
Jan  1 00:00:03 mto kernel: [    0.000000] Movable zone start for each node
Jan  1 00:00:03 mto kernel: [    0.000000] Early memory node ranges
Jan  1 00:00:03 mto kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000039bfffff]
Jan  1 00:00:03 mto kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 mto kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
Jan  1 00:00:03 mto kernel: [    0.000000] percpu: Embedded 32 pages/cpu s91224 r8192 d31656 u131072
Jan  1 00:00:03 mto kernel: [    0.000000] Detected PIPT I-cache on CPU0
Jan  1 00:00:03 mto kernel: [    0.000000] CPU features: detected: Spectre-v2
Jan  1 00:00:03 mto kernel: [    0.000000] CPU features: detected: Spectre-v4
Jan  1 00:00:03 mto kernel: [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Jan  1 00:00:03 mto kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990864
Jan  1 00:00:03 mto kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:D6:1F:7D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200
Jan  1 00:00:03 mto kernel: [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Jan  1 00:00:03 mto kernel: [    0.000000] software IO TLB: mapped [mem 0x0000000035c00000-0x0000000039c00000] (64MB)
Jan  1 00:00:03 mto kernel: [    0.000000] Memory: 3792268K/4026368K available (11264K kernel code, 1928K rwdata, 3972K rodata, 3712K init, 1242K bss, 168564K reserved, 65536K cma-reserved)
Jan  1 00:00:03 mto kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:03 mto kernel: [    0.000000] ftrace: allocating 36633 entries in 144 pages
Jan  1 00:00:03 mto kernel: [    0.000000] ftrace: allocated 144 pages with 2 groups
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: Preemptible hierarchical RCU implementation.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: 	RCU event tracing is enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Jan  1 00:00:03 mto kernel: [    0.000000] 	Trampoline variant of Tasks RCU enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] 	Rude variant of Tasks RCU enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Jan  1 00:00:03 mto kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan  1 00:00:03 mto kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Jan  1 00:00:03 mto kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Jan  1 00:00:03 mto kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0
Jan  1 00:00:03 mto kernel: [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
Jan  1 00:00:03 mto kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
Jan  1 00:00:03 mto kernel: [    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Jan  1 00:00:03 mto kernel: [    0.000257] Console: colour dummy device 80x25
Jan  1 00:00:03 mto kernel: [    0.000783] printk: console [tty1] enabled
Jan  1 00:00:03 mto kernel: [    0.000842] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
Jan  1 00:00:03 mto kernel: [    0.000883] pid_max: default: 32768 minimum: 301
Jan  1 00:00:03 mto kernel: [    0.001038] LSM: Security Framework initializing
Jan  1 00:00:03 mto kernel: [    0.001277] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.001355] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.002762] Disabling memory control group subsystem
Jan  1 00:00:03 mto kernel: [    0.005000] rcu: Hierarchical SRCU implementation.
Jan  1 00:00:03 mto kernel: [    0.006042] EFI services will not be available.
Jan  1 00:00:03 mto kernel: [    0.006556] smp: Bringing up secondary CPUs ...
Jan  1 00:00:03 mto kernel: [    0.007544] Detected PIPT I-cache on CPU1
Jan  1 00:00:03 mto kernel: [    0.007619] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.008787] Detected PIPT I-cache on CPU2
Jan  1 00:00:03 mto kernel: [    0.008834] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.009922] Detected PIPT I-cache on CPU3
Jan  1 00:00:03 mto kernel: [    0.009967] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
Jan  1 00:00:03 mto kernel: [    0.010116] smp: Brought up 1 node, 4 CPUs
Jan  1 00:00:03 mto kernel: [    0.010205] SMP: Total of 4 processors activated.
Jan  1 00:00:03 mto kernel: [    0.010229] CPU features: detected: 32-bit EL0 Support
Jan  1 00:00:03 mto kernel: [    0.010252] CPU features: detected: CRC32 instructions
Jan  1 00:00:03 mto kernel: [    0.010275] CPU features: detected: 32-bit EL1 Support
Jan  1 00:00:03 mto kernel: [    0.045619] CPU: All CPU(s) started at EL2
Jan  1 00:00:03 mto kernel: [    0.045701] alternatives: patching kernel code
Jan  1 00:00:03 mto kernel: [    0.047301] devtmpfs: initialized
Jan  1 00:00:03 mto kernel: [    0.057801] Enabled cp15_barrier support
Jan  1 00:00:03 mto kernel: [    0.057868] Enabled setend support
Jan  1 00:00:03 mto kernel: [    0.058081] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan  1 00:00:03 mto kernel: [    0.058129] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    0.060234] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:03 mto kernel: [    0.061064] DMI not present or invalid.
Jan  1 00:00:03 mto kernel: [    0.061455] NET: Registered protocol family 16
Jan  1 00:00:03 mto kernel: [    0.064581] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Jan  1 00:00:03 mto kernel: [    0.064860] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Jan  1 00:00:03 mto kernel: [    0.065783] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Jan  1 00:00:03 mto kernel: [    0.065893] audit: initializing netlink subsys (disabled)
Jan  1 00:00:03 mto kernel: [    0.066299] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1
Jan  1 00:00:03 mto kernel: [    0.066797] thermal_sys: Registered thermal governor 'step_wise'
Jan  1 00:00:03 mto kernel: [    0.067257] cpuidle: using governor menu
Jan  1 00:00:03 mto kernel: [    0.067585] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Jan  1 00:00:03 mto kernel: [    0.067772] ASID allocator initialised with 65536 entries
Jan  1 00:00:03 mto kernel: [    0.067920] Serial: AMBA PL011 UART driver
Jan  1 00:00:03 mto kernel: [    0.096399] bcm2835-mbox fe00b880.mailbox: mailbox enabled
Jan  1 00:00:03 mto kernel: [    0.104318] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
Jan  1 00:00:03 mto kernel: [    0.108313] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
Jan  1 00:00:03 mto kernel: [    0.141935] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
Jan  1 00:00:03 mto kernel: [    0.145850] vgaarb: loaded
Jan  1 00:00:03 mto kernel: [    0.146283] SCSI subsystem initialized
Jan  1 00:00:03 mto kernel: [    0.146506] usbcore: registered new interface driver usbfs
Jan  1 00:00:03 mto kernel: [    0.146582] usbcore: registered new interface driver hub
Jan  1 00:00:03 mto kernel: [    0.146659] usbcore: registered new device driver usb
Jan  1 00:00:03 mto kernel: [    0.146978] usb_phy_generic phy: supply vcc not found, using dummy regulator
Jan  1 00:00:03 mto kernel: [    0.148786] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:03 mto kernel: [    1.167502] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:03 mto kernel: [    1.167620] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan  1 00:00:03 mto kernel: [    1.167793] FS-Cache: Loaded
Jan  1 00:00:03 mto kernel: [    1.168042] CacheFiles: Loaded
Jan  1 00:00:03 mto kernel: [    1.178453] NET: Registered protocol family 2
Jan  1 00:00:03 mto kernel: [    1.179646] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.179719] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.179958] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.180414] TCP: Hash tables configured (established 32768 bind 32768)
Jan  1 00:00:03 mto kernel: [    1.180661] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.180750] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 mto kernel: [    1.181170] NET: Registered protocol family 1
Jan  1 00:00:03 mto kernel: [    1.182086] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:03 mto kernel: [    1.182116] RPC: Registered udp transport module.
Jan  1 00:00:03 mto kernel: [    1.182136] RPC: Registered tcp transport module.
Jan  1 00:00:03 mto kernel: [    1.182156] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:03 mto kernel: [    1.182189] PCI: CLS 0 bytes, default 64
Jan  1 00:00:03 mto kernel: [    1.184476] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
Jan  1 00:00:03 mto kernel: [    1.184812] kvm [1]: IPA Size Limit: 44 bits
Jan  1 00:00:03 mto kernel: [    1.186009] kvm [1]: vgic interrupt IRQ9
Jan  1 00:00:03 mto kernel: [    1.186302] kvm [1]: Hyp mode initialized successfully
Jan  1 00:00:03 mto kernel: [    1.188461] Initialise system trusted keyrings
Jan  1 00:00:03 mto kernel: [    1.188854] workingset: timestamp_bits=46 max_order=20 bucket_order=0
Jan  1 00:00:03 mto kernel: [    1.195021] zbud: loaded
Jan  1 00:00:03 mto kernel: [    1.196739] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:03 mto kernel: [    1.197430] NFS: Registering the id_resolver key type
Jan  1 00:00:03 mto kernel: [    1.197515] Key type id_resolver registered
Jan  1 00:00:03 mto kernel: [    1.197537] Key type id_legacy registered
Jan  1 00:00:03 mto kernel: [    1.197661] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan  1 00:00:03 mto kernel: [    1.197688] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Jan  1 00:00:03 mto kernel: [    1.198823] Key type asymmetric registered
Jan  1 00:00:03 mto kernel: [    1.198851] Asymmetric key parser 'x509' registered
Jan  1 00:00:03 mto kernel: [    1.198909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Jan  1 00:00:03 mto kernel: [    1.199160] io scheduler mq-deadline registered
Jan  1 00:00:03 mto kernel: [    1.199185] io scheduler kyber registered
Jan  1 00:00:03 mto kernel: [    1.203378] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
Jan  1 00:00:03 mto kernel: [    1.203426] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
Jan  1 00:00:03 mto kernel: [    1.203514] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
Jan  1 00:00:03 mto kernel: [    1.203608] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000
Jan  1 00:00:03 mto kernel: [    1.266882] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
Jan  1 00:00:03 mto kernel: [    1.267269] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
Jan  1 00:00:03 mto kernel: [    1.267302] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  1 00:00:03 mto kernel: [    1.267338] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
Jan  1 00:00:03 mto kernel: [    1.267441] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
Jan  1 00:00:03 mto kernel: [    1.267695] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 00:00:03 mto kernel: [    1.271324] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan  1 00:00:03 mto kernel: [    1.271730] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
Jan  1 00:00:03 mto kernel: [    1.271864] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
Jan  1 00:00:03 mto kernel: [    1.272301] pci 0000:01:00.0: PME# supported from D0 D3hot
Jan  1 00:00:03 mto kernel: [    1.275962] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan  1 00:00:03 mto kernel: [    1.276019] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 mto kernel: [    1.276053] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
Jan  1 00:00:03 mto kernel: [    1.276105] pci 0000:00:00.0: PCI bridge to [bus 01]
Jan  1 00:00:03 mto kernel: [    1.276137] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 mto kernel: [    1.276874] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
Jan  1 00:00:03 mto kernel: [    1.276923] bcm2708_fb: probe of soc:fb failed with error -2
Jan  1 00:00:03 mto kernel: [    1.283966] iproc-rng200 fe104000.rng: hwrng registered
Jan  1 00:00:03 mto kernel: [    1.284319] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jan  1 00:00:03 mto kernel: [    1.285265] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
Jan  1 00:00:03 mto kernel: [    1.285688] cacheinfo: Unable to detect cache hierarchy for CPU 0
Jan  1 00:00:03 mto kernel: [    1.297085] brd: module loaded
Jan  1 00:00:03 mto kernel: [    1.309662] loop: module loaded
Jan  1 00:00:03 mto kernel: [    1.311263] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:03 mto kernel: [    1.314534] libphy: Fixed MDIO Bus: probed
Jan  1 00:00:03 mto kernel: [    1.316079] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
Jan  1 00:00:03 mto kernel: [    1.328810] libphy: bcmgenet MII bus: probed
Jan  1 00:00:03 mto kernel: [    1.380942] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
Jan  1 00:00:03 mto kernel: [    1.382064] usbcore: registered new interface driver r8152
Jan  1 00:00:03 mto kernel: [    1.382144] usbcore: registered new interface driver lan78xx
Jan  1 00:00:03 mto kernel: [    1.382219] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:03 mto kernel: [    1.429706] pci 0000:00:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:03 mto kernel: [    1.429918] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.429972] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:03 mto kernel: [    1.430739] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
Jan  1 00:00:03 mto kernel: [    1.432044] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Jan  1 00:00:03 mto kernel: [    1.432077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 mto kernel: [    1.432104] usb usb1: Product: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.432128] usb usb1: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 mto kernel: [    1.432151] usb usb1: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 mto kernel: [    1.432943] hub 1-0:1.0: USB hub found
Jan  1 00:00:03 mto kernel: [    1.433053] hub 1-0:1.0: 1 port detected
Jan  1 00:00:03 mto kernel: [    1.433696] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.433732] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
Jan  1 00:00:03 mto kernel: [    1.433770] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
Jan  1 00:00:03 mto kernel: [    1.434189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
Jan  1 00:00:03 mto kernel: [    1.434221] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 mto kernel: [    1.434248] usb usb2: Product: xHCI Host Controller
Jan  1 00:00:03 mto kernel: [    1.434270] usb usb2: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 mto kernel: [    1.434293] usb usb2: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 mto kernel: [    1.434950] hub 2-0:1.0: USB hub found
Jan  1 00:00:03 mto kernel: [    1.435031] hub 2-0:1.0: 4 ports detected
Jan  1 00:00:03 mto kernel: [    1.436522] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:03 mto kernel: [    1.437404] usbcore: registered new interface driver uas
Jan  1 00:00:03 mto kernel: [    1.437514] usbcore: registered new interface driver usb-storage
Jan  1 00:00:03 mto kernel: [    1.437723] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:03 mto kernel: [    1.439607] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Jan  1 00:00:03 mto kernel: [    1.442888] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:03 mto kernel: [    1.442919] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:03 mto kernel: [    1.443584] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
Jan  1 00:00:03 mto kernel: [    1.444101] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:03 mto kernel: [    1.447476] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:03 mto kernel: [    1.447768] hid: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:03 mto kernel: [    1.447939] usbcore: registered new interface driver usbhid
Jan  1 00:00:03 mto kernel: [    1.447962] usbhid: USB HID core driver
Jan  1 00:00:03 mto kernel: [    1.455795] Initializing XFRM netlink socket
Jan  1 00:00:03 mto kernel: [    1.455865] NET: Registered protocol family 17
Jan  1 00:00:03 mto kernel: [    1.456004] Key type dns_resolver registered
Jan  1 00:00:03 mto kernel: [    1.456581] registered taskstats version 1
Jan  1 00:00:03 mto kernel: [    1.456622] Loading compiled-in X.509 certificates
Jan  1 00:00:03 mto kernel: [    1.457263] Key type ._fscrypt registered
Jan  1 00:00:03 mto kernel: [    1.457291] Key type .fscrypt registered
Jan  1 00:00:03 mto kernel: [    1.457312] Key type fscrypt-provisioning registered
Jan  1 00:00:03 mto kernel: [    1.468633] uart-pl011 fe201000.serial: there is not valid maps for state default
Jan  1 00:00:03 mto kernel: [    1.468978] uart-pl011 fe201000.serial: cts_event_workaround enabled
Jan  1 00:00:03 mto kernel: [    1.469102] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
Jan  1 00:00:03 mto kernel: [    2.737031] printk: console [ttyAMA0] enabled
Jan  1 00:00:03 mto kernel: [    2.748477] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Jan  1 00:00:03 mto kernel: [    2.756712] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jan  1 00:00:03 mto kernel: [    2.762758] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
Jan  1 00:00:03 mto kernel: [    2.798476] of_cfs_init
Jan  1 00:00:03 mto kernel: [    2.801093] of_cfs_init: OK
Jan  1 00:00:03 mto kernel: [    2.805208] uart-pl011 fe201000.serial: no DMA platform data
Jan  1 00:00:03 mto kernel: [    2.819085] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 00:00:03 mto kernel: [    2.826283] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 mto kernel: [    2.836305] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 mto kernel: [    2.837360] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
Jan  1 00:00:03 mto kernel: [    2.855499] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:03 mto kernel: [    2.863265] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 00:00:03 mto kernel: [    2.873048] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 mto kernel: [    2.907536] random: fast init done
Jan  1 00:00:03 mto kernel: [    2.951127] mmc1: new high speed SDIO card at address 0001
Jan  1 00:00:03 mto kernel: [    2.976489] mmc0: new ultra high speed DDR50 SDXC card at address 0001
Jan  1 00:00:03 mto kernel: [    2.980823] usb 1-1: new high-speed USB device number 2 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    2.985608] mmcblk0: mmc0:0001 BC2QT 59.6 GiB
Jan  1 00:00:03 mto kernel: [    3.001942]  mmcblk0: p1 p2
Jan  1 00:00:03 mto kernel: [    3.032833] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:03 mto kernel: [    3.041051] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:03 mto kernel: [    3.048871] devtmpfs: mounted
Jan  1 00:00:03 mto kernel: [    3.061587] Freeing unused kernel memory: 3712K
Jan  1 00:00:03 mto kernel: [    3.066332] Run /sbin/init as init process
Jan  1 00:00:03 mto kernel: [    3.143479] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
Jan  1 00:00:03 mto kernel: [    3.151730] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:03 mto kernel: [    3.158900] usb 1-1: Product: USB2.0 Hub
Jan  1 00:00:03 mto kernel: [    3.165179] hub 1-1:1.0: USB hub found
Jan  1 00:00:03 mto kernel: [    3.169296] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:03 mto kernel: [    3.269138] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.294287] usb 2-2: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
Jan  1 00:00:03 mto kernel: [    3.302613] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
Jan  1 00:00:03 mto kernel: [    3.309841] usb 2-2: Product: USB 10/100/1000 LAN
Jan  1 00:00:03 mto kernel: [    3.314593] usb 2-2: Manufacturer: TP-Link
Jan  1 00:00:03 mto kernel: [    3.318768] usb 2-2: SerialNumber: 000001
Jan  1 00:00:03 mto kernel: [    3.416362] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jan  1 00:00:03 mto kernel: [    3.457659] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.495393] r8152 2-2:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2
Jan  1 00:00:03 mto kernel: [    3.504194] r8152 2-2:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2)
Jan  1 00:00:03 mto kernel: [    3.546060] r8152 2-2:1.0 eth1: v1.12.11
Jan  1 00:00:03 mto kernel: [    3.550743] PPP generic driver version 2.4.2
Jan  1 00:00:03 mto kernel: [    3.565967] PPP Deflate Compression module registered
Jan  1 00:00:03 mto kernel: [    3.568883] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd
Jan  1 00:00:03 mto kernel: [    3.604444] PPP BSD Compression module registered
Jan  1 00:00:03 mto kernel: [    3.689599] usb 1-1.4: New USB device found, idVendor=1546, idProduct=01a7, bcdDevice= 1.00
Jan  1 00:00:03 mto kernel: [    3.698134] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 00:00:03 mto kernel: [    3.705591] usb 1-1.4: Product: u-blox 7 - GPS/GNSS Receiver
Jan  1 00:00:03 mto kernel: [    3.711317] usb 1-1.4: Manufacturer: u-blox AG - www.u-blox.com
Jan  1 00:00:03 mto sysctl: * Applying /etc/sysctl.conf ...
Jan  1 00:00:03 mto sysctl: kernel.panic = 10
Jan  1 00:00:03 mto sysctl: kernel.panic_on_oops = 1
Jan  1 00:00:03 mto sysctl: kernel.printk = 4 4 1 7
Jan  1 00:00:04 mto kernel: [    4.076199] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:04 mto kernel: [    4.077761] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:04 mto kernel: [    4.077851] random: udevd: uninitialized urandom read (16 bytes read)
Jan  1 00:00:04 mto kernel: [    4.272986] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Jan  1 00:00:04 mto kernel: [    4.273646] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Jan  1 00:00:04 mto kernel: [    4.274273] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Jan  1 00:00:04 mto kernel: [    4.274856] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Jan  1 00:00:04 mto kernel: [    4.308682] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.310597] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jan  1 00:00:04 mto kernel: [    4.310628] [vc_sm_connected_init]: start
Jan  1 00:00:04 mto kernel: [    4.314844] [vc_sm_connected_init]: installed successfully
Jan  1 00:00:04 mto kernel: [    4.336184] mc: Linux media interface: v0.10
Jan  1 00:00:04 mto kernel: [    4.380936] videodev: Linux video capture interface: v2.00
Jan  1 00:00:04 mto kernel: [    4.439538] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
Jan  1 00:00:04 mto kernel: [    4.441258] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.441463] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.443943] usbcore: registered new interface driver cdc_acm
Jan  1 00:00:04 mto kernel: [    4.443966] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 00:00:04 mto kernel: [    4.453352] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.454986] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.470233] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jan  1 00:00:04 mto kernel: [    4.473426] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 00:00:04 mto kernel: [    4.480489] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Jan  1 00:00:04 mto kernel: [    4.482000] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Jan  1 00:00:04 mto kernel: [    4.482624] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Jan  1 00:00:04 mto kernel: [    4.482997] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Jan  1 00:00:04 mto kernel: [    4.483035] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Jan  1 00:00:04 mto kernel: [    4.483057] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Jan  1 00:00:04 mto kernel: [    4.483075] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Jan  1 00:00:04 mto kernel: [    4.483092] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Jan  1 00:00:04 mto kernel: [    4.483216] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Jan  1 00:00:04 mto kernel: [    4.483257] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Jan  1 00:00:04 mto kernel: [    4.483309] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Jan  1 00:00:04 mto kernel: [    4.490685] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Jan  1 00:00:04 mto kernel: [    4.490733] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Jan  1 00:00:04 mto kernel: [    4.495370] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Jan  1 00:00:04 mto kernel: [    4.495425] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Jan  1 00:00:04 mto kernel: [    4.504991] rtc-pcf8523 1-0068: registered as rtc0
Jul  1 18:34:59 mto kernel: [    4.512655] rtc-pcf8523 1-0068: setting system clock to 2026-07-01T18:34:59 UTC (1782930899)
Jul  1 18:34:59 mto gpsd.hotplug: add /dev/ttyACM0
Jul  1 18:34:59 mto gpsdctl: gpsd_control(action=add, arg=/dev/ttyACM0)
Jul  1 18:34:59 mto gpsdctl: launching gpsd -n -F /run/gpsd.sock
Jul  1 18:34:59 mto kernel: [    4.638984] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jul  1 18:34:59 mto kernel: [    4.679488] NET: Registered protocol family 10
Jul  1 18:34:59 mto gpsd[190]: gpsd:ERROR: can't bind to IPv6 port 2947, Cannot assign requested address
Jul  1 18:34:59 mto kernel: [    4.681476] Segment Routing with IPv6
Jul  1 18:34:59 mto rsyslogd: [origin software="rsyslogd" swVersion="8.2010.0" x-pid="122" x-info="https://www.rsyslog.com"] start
Jul  1 18:34:59 mto kernel: [    4.694404] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jul  1 18:34:59 mto kernel: [    4.706941] usbcore: registered new interface driver brcmfmac
Jul  1 18:34:59 mto kernel: [    4.884177] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jul  1 18:34:59 mto kernel: [    4.892968] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Jul  1 18:34:59 mto kernel: [    4.906179] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
Jul  1 18:35:01 mto kernel: [    6.050389] urandom_read: 4 callbacks suppressed
Jul  1 18:35:01 mto kernel: [    6.050403] random: dd: uninitialized urandom read (512 bytes read)
Jul  1 18:35:00 mto kernel: [    6.122807] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
Jul  1 18:35:00 mto kernel: [    6.122890] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
Jul  1 18:35:00 mto wpa_supplicant[230]: Successfully initialized wpa_supplicant
Jul  1 18:35:00 mto kernel: [    6.352865] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Jul  1 18:35:02 mto kernel: [    8.320845] random: crng init done
Jul  1 18:35:02 mto wpa_supplicant[233]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
Jul  1 18:35:02 mto kernel: [    8.627097] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jul  1 18:35:02 mto kernel: [    8.627719] r8152 2-2:1.0 eth1: carrier on
Jul  1 18:35:03 mto ifplugd(eth0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jul  1 18:35:03 mto ifplugd(eth0): upping interface
Jul  1 18:35:03 mto ifplugd(eth0): using SIOCETHTOOL detection mode
Jul  1 18:35:03 mto ifplugd(eth0): interface exists
Jul  1 18:35:03 mto ifplugd(eth0): link is down
Jul  1 18:35:03 mto kernel: [    9.396997] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Jul  1 18:35:03 mto kernel: [    9.397472] bcmgenet fd580000.ethernet eth0: Link is Down
Jul  1 18:35:03 mto ifplugd(wlan0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jul  1 18:35:03 mto ifplugd(wlan0): using wireless extension detection mode
Jul  1 18:35:03 mto ifplugd(wlan0): interface exists
Jul  1 18:35:03 mto ifplugd(wlan0): link is down
Jul  1 18:35:03 mto ifplugd(eth1): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jul  1 18:35:03 mto ifplugd(eth1): using SIOCETHTOOL detection mode
Jul  1 18:35:03 mto ifplugd(eth1): interface exists
Jul  1 18:35:03 mto ifplugd(eth1): link is up
Jul  1 18:35:03 mto chronyd[324]: chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC -PRIVDROP -SCFILTER -SIGND +ASYNCDNS -NTS -SECHASH +IPV6 -DEBUG)
Jul  1 18:35:03 mto gpsd[328]: gpsd:ERROR: can't bind to IPv4 port 2947, Address already in use
Jul  1 18:35:03 mto gpsd[328]: gpsd:ERROR: maybe gpsd is already running!  Or systemd has the port?
Jul  1 18:35:03 mto gpsd[328]: gpsd:ERROR: SER: /dev/gps0 already opened by another process
Jul  1 18:35:03 mto sshd[338]: Server listening on 0.0.0.0 port 22.
Jul  1 18:35:03 mto sshd[338]: Server listening on :: port 22.
Jul  1 18:35:03 mto rpc.statd[352]: Version 2.3.3 starting
Jul  1 18:35:03 mto sm-notify[353]: Version 2.3.3 starting
Jul  1 18:35:03 mto rpc.statd[352]: Initializing NSM state
Jul  1 18:35:03 mto rpc.statd[352]: Running as root.  chown /run/nfs to choose different user
Jul  1 18:35:03 mto kernel: [    9.911356] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jul  1 18:35:04 mto kernel: [   11.050898] NFSD: Using UMH upcall client tracking operations.
Jul  1 18:35:04 mto kernel: [   11.050926] NFSD: starting 90-second grace period (net f0000081)
Jul  1 18:35:04 mto rpc.mountd[367]: Version 2.3.3 starting
Jul  1 18:35:05 mto su: + none root:news
Jul  1 18:35:07 mto ifplugd(eth0): link is up
Jul  1 18:35:07 mto ifplugd(eth0): executing '/etc/ifplugd/ifplugd.action eth0 up'
Jul  1 18:35:07 mto kernel: [   13.505117] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Jul  1 18:35:07 mto kernel: [   13.505186] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jul  1 18:35:07 mto udhcpc[453]: started, v1.33.0
Jul  1 18:35:07 mto udhcpc[453]: sending discover
Jul  1 18:35:07 mto : starting pid 465, tty '/dev/console': '/sbin/getty -L  console 0 vt100 '
Jul  1 18:35:07 mto : starting pid 466, tty '/dev/tty1': '/sbin/getty -L  tty1 0 vt100 '
Jul  1 18:35:10 mto udhcpc[453]: sending discover
Jul  1 18:35:10 mto udhcpc[453]: sending select for 192.168.1.166
Jul  1 18:35:10 mto udhcpc[453]: lease of 192.168.1.166 obtained, lease time 86400
Jul  1 18:35:10 mto ifplugd(eth0): exit code: 0
Jul  1 18:35:36 mto chronyd[324]: Selected source 184.105.182.16 (pool.ntp.org)
Jul  1 18:35:36 mto chronyd[324]: System clock wrong by 1.370837 seconds
Jul  1 18:35:37 mto chronyd[324]: System clock was stepped by 1.370837 seconds
Jul  1 18:36:43 mto chronyd[324]: Selected source 144.202.62.209 (pool.ntp.org)
Jul  1 19:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 19:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 20:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 20:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 21:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 21:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 21:16:47 mto kernel: [ 9712.238907] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
Jul  1 22:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  1 22:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 23:00:01 mto relay-watchdog: Relay flag is still current
Jul  1 23:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 00:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  2 00:00:02 mto relay-watchdog: Relay flag is still current
Jul  2 01:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 01:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 02:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 02:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 03:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 03:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 04:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 05:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 05:41:51 mto kernel: [40016.633105] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
Jul  2 05:41:51 mto kernel: [40016.733467] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jul  2 05:41:51 mto kernel: [40016.733487] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  2 06:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  2 06:35:12 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  2 06:35:12 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  2 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  2 07:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 07:26:58 mto kernel: [46323.640249] usb 1-1.3: USB disconnect, device number 4
Jul  2 08:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 09:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 10:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 11:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 12:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 13:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 14:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 14:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 15:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 15:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 16:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 16:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 17:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 17:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 18:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 18:35:12 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  2 18:35:12 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  2 19:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 19:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 20:00:02 mto relay-watchdog: Relay flag is still current
Jul  2 20:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  2 21:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 21:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 22:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  2 22:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 23:00:01 mto relay-watchdog: Relay flag is still current
Jul  2 23:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 00:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 00:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 01:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 01:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 02:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 02:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 03:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 03:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 04:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 05:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 05:39:51 mto kernel: [126297.684819] usb 1-1.3: new high-speed USB device number 5 using xhci_hcd
Jul  3 05:39:51 mto kernel: [126297.785213] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jul  3 05:39:51 mto kernel: [126297.785235] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  3 06:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  3 06:35:12 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  3 06:35:12 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  3 07:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  3 07:30:58 mto kernel: [132964.935079] usb 1-1.3: USB disconnect, device number 5
Jul  3 08:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 09:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 10:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 11:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 12:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 13:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 14:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 14:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 15:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 15:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 16:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  3 16:00:02 mto relay-watchdog: Relay flag is still current
Jul  3 17:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 17:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 18:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 18:35:12 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  3 18:35:12 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  3 19:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 19:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 20:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 20:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 21:00:02 mto relay-watchdog: Relay flag is still current
Jul  3 21:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  3 22:00:01 mto relay-watchdog: Relay flag is still current
Jul  3 22:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  3 23:00:02 mto relay-watchdog: Relay flag is still current
Jul  3 23:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  4 00:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 00:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 01:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 01:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 02:00:02 mto relay-watchdog: Relay flag is still current
Jul  4 02:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  4 03:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 03:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 04:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 05:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 05:37:41 mto kernel: [212568.750972] usb 1-1.3: new high-speed USB device number 6 using xhci_hcd
Jul  4 05:37:41 mto kernel: [212568.851360] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jul  4 05:37:41 mto kernel: [212568.851383] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  4 06:00:02 mto exchange-watchdog: Keepalive flags found, skipping
Jul  4 06:00:02 mto relay-watchdog: Relay flag is still current
Jul  4 06:35:12 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  4 06:35:12 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  4 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  4 07:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 07:30:59 mto kernel: [219366.838831] usb 1-1.3: USB disconnect, device number 6
Jul  4 08:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 09:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 10:00:02 mto relay-watchdog: Relay flag is still current
Jul  4 10:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  4 11:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 12:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 13:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 14:00:02 mto relay-watchdog: Relay flag is still current
Jul  4 14:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  4 15:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 15:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 16:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 16:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 17:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 17:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 18:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 18:35:12 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  4 18:35:12 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  4 19:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 19:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 20:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 20:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 21:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 21:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 22:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 22:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  4 23:00:01 mto relay-watchdog: Relay flag is still current
Jul  4 23:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 00:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 00:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 01:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 01:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 02:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 02:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 03:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 03:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 04:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 05:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 05:35:31 mto kernel: [298840.062340] usb 1-1.3: new high-speed USB device number 7 using xhci_hcd
Jul  5 05:35:31 mto kernel: [298840.162714] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jul  5 05:35:31 mto kernel: [298840.162737] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  5 06:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  5 06:35:12 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  5 06:35:12 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  5 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  5 07:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 07:34:58 mto kernel: [306007.100563] usb 1-1.3: USB disconnect, device number 7
Jul  5 08:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 09:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 10:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 11:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 12:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 13:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 14:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 14:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 15:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 15:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 16:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 16:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 17:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 17:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 18:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 18:35:13 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  5 18:35:13 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  5 19:00:02 mto relay-watchdog: Relay flag is still current
Jul  5 19:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  5 20:00:02 mto relay-watchdog: Relay flag is still current
Jul  5 20:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  5 21:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 21:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 22:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 22:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  5 23:00:01 mto relay-watchdog: Relay flag is still current
Jul  5 23:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 00:00:02 mto relay-watchdog: Relay flag is still current
Jul  6 00:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  6 01:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 01:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 02:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 02:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 03:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 03:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 04:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 05:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 05:33:11 mto kernel: [385100.872191] usb 1-1.3: new high-speed USB device number 8 using xhci_hcd
Jul  6 05:33:11 mto kernel: [385100.972562] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jul  6 05:33:11 mto kernel: [385100.972585] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  6 06:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  6 06:35:13 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  6 06:35:13 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  6 07:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  6 07:38:59 mto kernel: [392648.890259] usb 1-1.3: USB disconnect, device number 8
Jul  6 08:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 09:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 10:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 11:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 12:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 13:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 14:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 14:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 15:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 15:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 16:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 16:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 17:00:02 mto relay-watchdog: Relay flag is still current
Jul  6 17:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  6 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 18:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 18:35:13 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  6 18:35:13 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  6 19:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 19:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 20:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 20:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 21:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 21:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 22:00:01 mto relay-watchdog: Relay flag is still current
Jul  6 22:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 23:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  6 23:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 00:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 00:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 01:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 01:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 02:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 02:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 03:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 03:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 04:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 05:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 05:30:51 mto kernel: [471361.936387] usb 1-1.3: new high-speed USB device number 9 using xhci_hcd
Jul  7 05:30:51 mto kernel: [471362.036773] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jul  7 05:30:51 mto kernel: [471362.036797] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  7 06:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  7 06:35:13 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  7 06:35:13 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  7 07:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  7 07:38:59 mto kernel: [479050.009962] usb 1-1.3: USB disconnect, device number 9
Jul  7 08:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 09:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 10:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 11:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 12:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 13:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 14:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 14:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 15:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 15:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 16:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 16:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 17:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 17:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 18:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 18:35:13 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  7 18:35:13 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  7 19:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 19:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 20:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 20:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 20:07:56 mto sshd[29024]: Accepted publickey for ops from 127.0.0.1 port 36798 ssh2: ED25519 SHA256:mp/fTOj+GTmd28hwRU4xsv3BTQfPIEbak3MjNz/gIzM
Jul  7 21:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 21:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 22:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 22:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 23:00:01 mto relay-watchdog: Relay flag is still current
Jul  7 23:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  7 23:38:21 mto sshd[29026]: Received disconnect from 127.0.0.1 port 36798:11: disconnected by user
Jul  7 23:38:21 mto sshd[29026]: Disconnected from user ops 127.0.0.1 port 36798
Jul  8 00:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 00:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 01:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 01:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 02:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 02:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 03:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 03:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  8 04:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 04:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 05:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 05:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 05:28:31 mto kernel: [557623.289412] usb 1-1.3: new high-speed USB device number 10 using xhci_hcd
Jul  8 05:28:31 mto kernel: [557623.389772] usb 1-1.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=19.c6
Jul  8 05:28:31 mto kernel: [557623.389793] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  8 06:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  8 06:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 06:35:13 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  8 06:35:13 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  8 07:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 07:00:01 mto exchange-watchdog: Keepalive flags found, skipping
Jul  8 07:34:34 mto sshd[22482]: error: kex_exchange_identification: Connection closed by remote host
Jul  8 07:34:34 mto sshd[22482]: Connection closed by 192.168.1.1 port 55074
Jul  8 07:38:33 mto sshd[22825]: error: kex_exchange_identification: Connection closed by remote host
Jul  8 07:38:33 mto sshd[22825]: Connection closed by 192.168.1.1 port 41750
Jul  8 07:42:59 mto kernel: [565691.323570] usb 1-1.3: USB disconnect, device number 10
Jul  8 08:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 08:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 09:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 09:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 10:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 10:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 11:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 11:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 12:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 12:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 13:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 13:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 14:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 14:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 15:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  8 15:00:02 mto relay-watchdog: Relay flag is still current
Jul  8 16:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 16:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 17:00:02 mto relay-watchdog: Relay flag is still current
Jul  8 17:00:02 mto exchange-watchdog: Exchange flag is still current
Jul  8 18:00:01 mto exchange-watchdog: Exchange flag is still current
Jul  8 18:00:01 mto relay-watchdog: Relay flag is still current
Jul  8 18:35:01 mto cron.flagwatchdog: Reboot system flag detected
Jul  8 18:35:01 mto cron.flagwatchdog: Rebooting system
Jul  8 18:35:01 mto : starting pid 13878, tty '': '/etc/init.d/rcK'
Jul  8 18:35:13 mto udhcpc[483]: sending renew to 192.168.1.1
Jul  8 18:35:13 mto udhcpc[483]: lease of 192.168.1.166 obtained, lease time 86400
Jul  8 18:35:17 mto su: + none root:news
Jul  8 18:35:42 mto rpc.mountd[367]: Caught signal 15, un-registering and exiting.
Jul  8 18:35:42 mto sshd[338]: Received signal 15; terminating.
Jul  8 18:35:43 mto chronyd[324]: chronyd exiting
Jul  8 18:35:43 mto ifplugd(eth0): exiting
Jul  8 18:35:43 mto ifplugd(wlan0): exiting
Jul  8 18:35:43 mto ifplugd(eth1): exiting
Jul  8 18:35:44 mto wpa_supplicant[233]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Jul  8 18:35:44 mto wpa_supplicant[233]: p2p-dev-wlan0: CTRL-EVENT-TERMINATING 
Jul  8 18:35:44 mto wpa_supplicant[233]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
