Jan  1 00:00:03 par kernel: [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
Jan  1 00:00:03 par kernel: [    0.000000] Linux version 5.10.36-v8 (valentic@cambria.valentic.net) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot v1.11-dirty) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1 SMP PREEMPT Wed Apr 13 15:42:39 PDT 2022
Jan  1 00:00:03 par kernel: [    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2
Jan  1 00:00:03 par kernel: [    0.000000] efi: UEFI not found.
Jan  1 00:00:03 par kernel: [    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
Jan  1 00:00:03 par kernel: [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Jan  1 00:00:03 par kernel: [    0.000000] Zone ranges:
Jan  1 00:00:03 par kernel: [    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
Jan  1 00:00:03 par kernel: [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 par kernel: [    0.000000]   Normal   empty
Jan  1 00:00:03 par kernel: [    0.000000] Movable zone start for each node
Jan  1 00:00:03 par kernel: [    0.000000] Early memory node ranges
Jan  1 00:00:03 par kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000039bfffff]
Jan  1 00:00:03 par kernel: [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
Jan  1 00:00:03 par kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
Jan  1 00:00:03 par kernel: [    0.000000] percpu: Embedded 32 pages/cpu s91224 r8192 d31656 u131072
Jan  1 00:00:03 par kernel: [    0.000000] Detected PIPT I-cache on CPU0
Jan  1 00:00:03 par kernel: [    0.000000] CPU features: detected: Spectre-v2
Jan  1 00:00:03 par kernel: [    0.000000] CPU features: detected: Spectre-v4
Jan  1 00:00:03 par kernel: [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Jan  1 00:00:03 par kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 990864
Jan  1 00:00:03 par kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:74:21:E3 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200
Jan  1 00:00:03 par kernel: [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Jan  1 00:00:03 par kernel: [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Jan  1 00:00:03 par kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Jan  1 00:00:03 par kernel: [    0.000000] software IO TLB: mapped [mem 0x0000000035c00000-0x0000000039c00000] (64MB)
Jan  1 00:00:03 par kernel: [    0.000000] Memory: 3792268K/4026368K available (11264K kernel code, 1928K rwdata, 3972K rodata, 3712K init, 1242K bss, 168564K reserved, 65536K cma-reserved)
Jan  1 00:00:03 par kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jan  1 00:00:03 par kernel: [    0.000000] ftrace: allocating 36633 entries in 144 pages
Jan  1 00:00:03 par kernel: [    0.000000] ftrace: allocated 144 pages with 2 groups
Jan  1 00:00:03 par kernel: [    0.000000] rcu: Preemptible hierarchical RCU implementation.
Jan  1 00:00:03 par kernel: [    0.000000] rcu: 	RCU event tracing is enabled.
Jan  1 00:00:03 par kernel: [    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Jan  1 00:00:03 par kernel: [    0.000000] 	Trampoline variant of Tasks RCU enabled.
Jan  1 00:00:03 par kernel: [    0.000000] 	Rude variant of Tasks RCU enabled.
Jan  1 00:00:03 par kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Jan  1 00:00:03 par kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Jan  1 00:00:03 par kernel: [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jan  1 00:00:03 par kernel: [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Jan  1 00:00:03 par kernel: [    0.000000] GIC: Using split EOI/Deactivate mode
Jan  1 00:00:03 par kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0
Jan  1 00:00:03 par kernel: [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
Jan  1 00:00:03 par kernel: [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
Jan  1 00:00:03 par kernel: [    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Jan  1 00:00:03 par kernel: [    0.000252] Console: colour dummy device 80x25
Jan  1 00:00:03 par kernel: [    0.000777] printk: console [tty1] enabled
Jan  1 00:00:03 par kernel: [    0.000834] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
Jan  1 00:00:03 par kernel: [    0.000876] pid_max: default: 32768 minimum: 301
Jan  1 00:00:03 par kernel: [    0.001027] LSM: Security Framework initializing
Jan  1 00:00:03 par kernel: [    0.001262] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 par kernel: [    0.001340] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 par kernel: [    0.002729] Disabling memory control group subsystem
Jan  1 00:00:03 par kernel: [    0.004943] rcu: Hierarchical SRCU implementation.
Jan  1 00:00:03 par kernel: [    0.005962] EFI services will not be available.
Jan  1 00:00:03 par kernel: [    0.006464] smp: Bringing up secondary CPUs ...
Jan  1 00:00:03 par kernel: [    0.007437] Detected PIPT I-cache on CPU1
Jan  1 00:00:03 par kernel: [    0.007512] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
Jan  1 00:00:03 par kernel: [    0.008671] Detected PIPT I-cache on CPU2
Jan  1 00:00:03 par kernel: [    0.008717] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
Jan  1 00:00:03 par kernel: [    0.009797] Detected PIPT I-cache on CPU3
Jan  1 00:00:03 par kernel: [    0.009843] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
Jan  1 00:00:03 par kernel: [    0.009991] smp: Brought up 1 node, 4 CPUs
Jan  1 00:00:03 par kernel: [    0.010080] SMP: Total of 4 processors activated.
Jan  1 00:00:03 par kernel: [    0.010104] CPU features: detected: 32-bit EL0 Support
Jan  1 00:00:03 par kernel: [    0.010127] CPU features: detected: CRC32 instructions
Jan  1 00:00:03 par kernel: [    0.010150] CPU features: detected: 32-bit EL1 Support
Jan  1 00:00:03 par kernel: [    0.045359] CPU: All CPU(s) started at EL2
Jan  1 00:00:03 par kernel: [    0.045440] alternatives: patching kernel code
Jan  1 00:00:03 par kernel: [    0.046974] devtmpfs: initialized
Jan  1 00:00:03 par kernel: [    0.057417] Enabled cp15_barrier support
Jan  1 00:00:03 par kernel: [    0.057482] Enabled setend support
Jan  1 00:00:03 par kernel: [    0.057693] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan  1 00:00:03 par kernel: [    0.057739] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 par kernel: [    0.059678] pinctrl core: initialized pinctrl subsystem
Jan  1 00:00:03 par kernel: [    0.060540] DMI not present or invalid.
Jan  1 00:00:03 par kernel: [    0.060918] NET: Registered protocol family 16
Jan  1 00:00:03 par kernel: [    0.063978] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Jan  1 00:00:03 par kernel: [    0.064283] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Jan  1 00:00:03 par kernel: [    0.065212] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Jan  1 00:00:03 par kernel: [    0.065320] audit: initializing netlink subsys (disabled)
Jan  1 00:00:03 par kernel: [    0.065702] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1
Jan  1 00:00:03 par kernel: [    0.066192] thermal_sys: Registered thermal governor 'step_wise'
Jan  1 00:00:03 par kernel: [    0.066637] cpuidle: using governor menu
Jan  1 00:00:03 par kernel: [    0.066958] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Jan  1 00:00:03 par kernel: [    0.067141] ASID allocator initialised with 65536 entries
Jan  1 00:00:03 par kernel: [    0.067289] Serial: AMBA PL011 UART driver
Jan  1 00:00:03 par kernel: [    0.095706] bcm2835-mbox fe00b880.mailbox: mailbox enabled
Jan  1 00:00:03 par kernel: [    0.104380] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-30T15:54:12, variant start
Jan  1 00:00:03 par kernel: [    0.108375] raspberrypi-firmware soc:firmware: Firmware hash is 3e104c5ed69dc796755b7195973a8d00482d76dd
Jan  1 00:00:03 par kernel: [    0.141908] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
Jan  1 00:00:03 par kernel: [    0.145756] vgaarb: loaded
Jan  1 00:00:03 par kernel: [    0.146178] SCSI subsystem initialized
Jan  1 00:00:03 par kernel: [    0.146398] usbcore: registered new interface driver usbfs
Jan  1 00:00:03 par kernel: [    0.146474] usbcore: registered new interface driver hub
Jan  1 00:00:03 par kernel: [    0.146552] usbcore: registered new device driver usb
Jan  1 00:00:03 par kernel: [    0.146868] usb_phy_generic phy: supply vcc not found, using dummy regulator
Jan  1 00:00:03 par kernel: [    0.148641] clocksource: Switched to clocksource arch_sys_counter
Jan  1 00:00:03 par kernel: [    1.165731] VFS: Disk quotas dquot_6.6.0
Jan  1 00:00:03 par kernel: [    1.165849] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan  1 00:00:03 par kernel: [    1.166020] FS-Cache: Loaded
Jan  1 00:00:03 par kernel: [    1.166268] CacheFiles: Loaded
Jan  1 00:00:03 par kernel: [    1.176761] NET: Registered protocol family 2
Jan  1 00:00:03 par kernel: [    1.177670] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
Jan  1 00:00:03 par kernel: [    1.177748] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
Jan  1 00:00:03 par kernel: [    1.178074] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
Jan  1 00:00:03 par kernel: [    1.178494] TCP: Hash tables configured (established 32768 bind 32768)
Jan  1 00:00:03 par kernel: [    1.178737] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 par kernel: [    1.178823] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
Jan  1 00:00:03 par kernel: [    1.179157] NET: Registered protocol family 1
Jan  1 00:00:03 par kernel: [    1.180050] RPC: Registered named UNIX socket transport module.
Jan  1 00:00:03 par kernel: [    1.180078] RPC: Registered udp transport module.
Jan  1 00:00:03 par kernel: [    1.180098] RPC: Registered tcp transport module.
Jan  1 00:00:03 par kernel: [    1.180118] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 00:00:03 par kernel: [    1.180150] PCI: CLS 0 bytes, default 64
Jan  1 00:00:03 par kernel: [    1.182488] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
Jan  1 00:00:03 par kernel: [    1.182781] kvm [1]: IPA Size Limit: 44 bits
Jan  1 00:00:03 par kernel: [    1.183938] kvm [1]: vgic interrupt IRQ9
Jan  1 00:00:03 par kernel: [    1.184219] kvm [1]: Hyp mode initialized successfully
Jan  1 00:00:03 par kernel: [    1.186341] Initialise system trusted keyrings
Jan  1 00:00:03 par kernel: [    1.186702] workingset: timestamp_bits=46 max_order=20 bucket_order=0
Jan  1 00:00:03 par kernel: [    1.192909] zbud: loaded
Jan  1 00:00:03 par kernel: [    1.194589] FS-Cache: Netfs 'nfs' registered for caching
Jan  1 00:00:03 par kernel: [    1.195294] NFS: Registering the id_resolver key type
Jan  1 00:00:03 par kernel: [    1.195357] Key type id_resolver registered
Jan  1 00:00:03 par kernel: [    1.195380] Key type id_legacy registered
Jan  1 00:00:03 par kernel: [    1.195503] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan  1 00:00:03 par kernel: [    1.195530] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Jan  1 00:00:03 par kernel: [    1.196681] Key type asymmetric registered
Jan  1 00:00:03 par kernel: [    1.196708] Asymmetric key parser 'x509' registered
Jan  1 00:00:03 par kernel: [    1.196787] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Jan  1 00:00:03 par kernel: [    1.197062] io scheduler mq-deadline registered
Jan  1 00:00:03 par kernel: [    1.197089] io scheduler kyber registered
Jan  1 00:00:03 par kernel: [    1.201230] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
Jan  1 00:00:03 par kernel: [    1.201276] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
Jan  1 00:00:03 par kernel: [    1.201364] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
Jan  1 00:00:03 par kernel: [    1.201458] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
Jan  1 00:00:03 par kernel: [    1.250738] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
Jan  1 00:00:03 par kernel: [    1.251113] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
Jan  1 00:00:03 par kernel: [    1.251145] pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  1 00:00:03 par kernel: [    1.251173] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
Jan  1 00:00:03 par kernel: [    1.251273] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
Jan  1 00:00:03 par kernel: [    1.251522] pci 0000:00:00.0: PME# supported from D0 D3hot
Jan  1 00:00:03 par kernel: [    1.255106] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Jan  1 00:00:03 par kernel: [    1.255399] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
Jan  1 00:00:03 par kernel: [    1.255477] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
Jan  1 00:00:03 par kernel: [    1.255728] pci 0000:01:00.0: PME# supported from D0 D3cold
Jan  1 00:00:03 par kernel: [    1.259167] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Jan  1 00:00:03 par kernel: [    1.259222] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 par kernel: [    1.259254] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
Jan  1 00:00:03 par kernel: [    1.259306] pci 0000:00:00.0: PCI bridge to [bus 01]
Jan  1 00:00:03 par kernel: [    1.259337] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
Jan  1 00:00:03 par kernel: [    1.260008] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
Jan  1 00:00:03 par kernel: [    1.260056] bcm2708_fb: probe of soc:fb failed with error -2
Jan  1 00:00:03 par kernel: [    1.267091] iproc-rng200 fe104000.rng: hwrng registered
Jan  1 00:00:03 par kernel: [    1.267438] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
Jan  1 00:00:03 par kernel: [    1.268271] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
Jan  1 00:00:03 par kernel: [    1.268696] cacheinfo: Unable to detect cache hierarchy for CPU 0
Jan  1 00:00:03 par kernel: [    1.279625] brd: module loaded
Jan  1 00:00:03 par kernel: [    1.291712] loop: module loaded
Jan  1 00:00:03 par kernel: [    1.293353] Loading iSCSI transport class v2.0-870.
Jan  1 00:00:03 par kernel: [    1.296513] libphy: Fixed MDIO Bus: probed
Jan  1 00:00:03 par kernel: [    1.298147] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
Jan  1 00:00:03 par kernel: [    1.308706] libphy: bcmgenet MII bus: probed
Jan  1 00:00:03 par kernel: [    1.360797] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
Jan  1 00:00:03 par kernel: [    1.361864] usbcore: registered new interface driver r8152
Jan  1 00:00:03 par kernel: [    1.361944] usbcore: registered new interface driver lan78xx
Jan  1 00:00:03 par kernel: [    1.362037] usbcore: registered new interface driver smsc95xx
Jan  1 00:00:03 par kernel: [    1.363673] pci 0000:00:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:03 par kernel: [    1.363735] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
Jan  1 00:00:03 par kernel: [    1.363852] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 par kernel: [    1.363904] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
Jan  1 00:00:03 par kernel: [    1.364670] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
Jan  1 00:00:03 par kernel: [    1.365589] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
Jan  1 00:00:03 par kernel: [    1.365623] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 par kernel: [    1.365650] usb usb1: Product: xHCI Host Controller
Jan  1 00:00:03 par kernel: [    1.365673] usb usb1: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 par kernel: [    1.365696] usb usb1: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 par kernel: [    1.366394] hub 1-0:1.0: USB hub found
Jan  1 00:00:03 par kernel: [    1.366472] hub 1-0:1.0: 1 port detected
Jan  1 00:00:03 par kernel: [    1.367037] xhci_hcd 0000:01:00.0: xHCI Host Controller
Jan  1 00:00:03 par kernel: [    1.367071] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
Jan  1 00:00:03 par kernel: [    1.367109] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
Jan  1 00:00:03 par kernel: [    1.367492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
Jan  1 00:00:03 par kernel: [    1.367523] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 00:00:03 par kernel: [    1.367549] usb usb2: Product: xHCI Host Controller
Jan  1 00:00:03 par kernel: [    1.367571] usb usb2: Manufacturer: Linux 5.10.36-v8 xhci-hcd
Jan  1 00:00:03 par kernel: [    1.367594] usb usb2: SerialNumber: 0000:01:00.0
Jan  1 00:00:03 par kernel: [    1.368219] hub 2-0:1.0: USB hub found
Jan  1 00:00:03 par kernel: [    1.368297] hub 2-0:1.0: 4 ports detected
Jan  1 00:00:03 par kernel: [    1.369845] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jan  1 00:00:03 par kernel: [    1.370681] usbcore: registered new interface driver uas
Jan  1 00:00:03 par kernel: [    1.370794] usbcore: registered new interface driver usb-storage
Jan  1 00:00:03 par kernel: [    1.370995] mousedev: PS/2 mouse device common for all mice
Jan  1 00:00:03 par kernel: [    1.372847] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Jan  1 00:00:03 par kernel: [    1.376165] sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:03 par kernel: [    1.376196] sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:03 par kernel: [    1.376953] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
Jan  1 00:00:03 par kernel: [    1.377473] sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:03 par kernel: [    1.381348] ledtrig-cpu: registered to indicate activity on CPUs
Jan  1 00:00:03 par kernel: [    1.381740] hid: raw HID events driver (C) Jiri Kosina
Jan  1 00:00:03 par kernel: [    1.381996] usbcore: registered new interface driver usbhid
Jan  1 00:00:03 par kernel: [    1.382021] usbhid: USB HID core driver
Jan  1 00:00:03 par kernel: [    1.389748] Initializing XFRM netlink socket
Jan  1 00:00:03 par kernel: [    1.389816] NET: Registered protocol family 17
Jan  1 00:00:03 par kernel: [    1.389955] Key type dns_resolver registered
Jan  1 00:00:03 par kernel: [    1.390519] registered taskstats version 1
Jan  1 00:00:03 par kernel: [    1.390567] Loading compiled-in X.509 certificates
Jan  1 00:00:03 par kernel: [    1.391132] Key type ._fscrypt registered
Jan  1 00:00:03 par kernel: [    1.391160] Key type .fscrypt registered
Jan  1 00:00:03 par kernel: [    1.391180] Key type fscrypt-provisioning registered
Jan  1 00:00:03 par kernel: [    1.402480] uart-pl011 fe201000.serial: there is not valid maps for state default
Jan  1 00:00:03 par kernel: [    1.402790] uart-pl011 fe201000.serial: cts_event_workaround enabled
Jan  1 00:00:03 par kernel: [    1.402922] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
Jan  1 00:00:03 par kernel: [    2.676848] printk: console [ttyAMA0] enabled
Jan  1 00:00:03 par kernel: [    2.688505] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Jan  1 00:00:03 par kernel: [    2.696757] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jan  1 00:00:03 par kernel: [    2.702797] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
Jan  1 00:00:03 par kernel: [    2.739405] of_cfs_init
Jan  1 00:00:03 par kernel: [    2.742044] of_cfs_init: OK
Jan  1 00:00:03 par kernel: [    2.746044] uart-pl011 fe201000.serial: no DMA platform data
Jan  1 00:00:03 par kernel: [    2.759019] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jan  1 00:00:03 par kernel: [    2.766247] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 par kernel: [    2.775065] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 par kernel: [    2.777297] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
Jan  1 00:00:03 par kernel: [    2.794457] Waiting for root device /dev/mmcblk0p2...
Jan  1 00:00:03 par kernel: [    2.795071] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jan  1 00:00:03 par kernel: [    2.811141] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jan  1 00:00:03 par kernel: [    2.849763] random: fast init done
Jan  1 00:00:03 par kernel: [    2.886279] mmc1: new high speed SDIO card at address 0001
Jan  1 00:00:03 par kernel: [    2.900058] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
Jan  1 00:00:03 par kernel: [    2.907537] mmcblk0: mmc0:aaaa SD64G 59.5 GiB
Jan  1 00:00:03 par kernel: [    2.914426]  mmcblk0: p1 p2
Jan  1 00:00:03 par kernel: [    2.920689] usb 1-1: new high-speed USB device number 2 using xhci_hcd
Jan  1 00:00:03 par kernel: [    2.940942] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jan  1 00:00:03 par kernel: [    2.949248] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jan  1 00:00:03 par kernel: [    2.957036] devtmpfs: mounted
Jan  1 00:00:03 par kernel: [    2.968921] Freeing unused kernel memory: 3712K
Jan  1 00:00:03 par kernel: [    2.973659] Run /sbin/init as init process
Jan  1 00:00:03 par kernel: [    3.074296] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
Jan  1 00:00:03 par kernel: [    3.082543] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:03 par kernel: [    3.089714] usb 1-1: Product: USB2.0 Hub
Jan  1 00:00:03 par kernel: [    3.095563] hub 1-1:1.0: USB hub found
Jan  1 00:00:03 par kernel: [    3.099607] hub 1-1:1.0: 4 ports detected
Jan  1 00:00:03 par kernel: [    3.331280] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jan  1 00:00:03 par kernel: [    3.396709] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
Jan  1 00:00:03 par kernel: [    3.461221] PPP generic driver version 2.4.2
Jan  1 00:00:03 par kernel: [    3.476245] PPP Deflate Compression module registered
Jan  1 00:00:03 par kernel: [    3.508780] PPP BSD Compression module registered
Jan  1 00:00:03 par kernel: [    3.509168] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
Jan  1 00:00:03 par kernel: [    3.523338] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:03 par kernel: [    3.530765] usb 1-1.1: Product: USB 2.0 Hub
Jan  1 00:00:03 par kernel: [    3.536473] hub 1-1.1:1.0: USB hub found
Jan  1 00:00:03 par kernel: [    3.540664] hub 1-1.1:1.0: 4 ports detected
Jan  1 00:00:03 par kernel: [    3.624706] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
Jan  1 00:00:03 par sysctl: * Applying /etc/sysctl.conf ...
Jan  1 00:00:03 par sysctl: kernel.panic = 10
Jan  1 00:00:03 par sysctl: kernel.panic_on_oops = 1
Jan  1 00:00:03 par sysctl: kernel.printk = 4 4 1 7
Jan  1 00:00:03 par kernel: [    3.733130] usb 1-1.3: New USB device found, idVendor=1546, idProduct=01a7, bcdDevice= 1.00
Jan  1 00:00:03 par kernel: [    3.733156] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 00:00:03 par kernel: [    3.733171] usb 1-1.3: Product: u-blox 7 - GPS/GNSS Receiver
Jan  1 00:00:03 par kernel: [    3.733184] usb 1-1.3: Manufacturer: u-blox AG - www.u-blox.com
Jan  1 00:00:03 par kernel: [    3.816734] usb 1-1.4: new high-speed USB device number 5 using xhci_hcd
Jan  1 00:00:03 par kernel: [    3.918001] usb 1-1.4: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
Jan  1 00:00:03 par kernel: [    3.918025] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
Jan  1 00:00:03 par kernel: [    3.918039] usb 1-1.4: Product: USB 10/100/1000 LAN
Jan  1 00:00:03 par kernel: [    3.918051] usb 1-1.4: Manufacturer: TP-Link
Jan  1 00:00:03 par kernel: [    3.918063] usb 1-1.4: SerialNumber: 000001
Jan  1 00:00:04 par kernel: [    4.096693] usb 1-1.1.4: new high-speed USB device number 6 using xhci_hcd
Jan  1 00:00:04 par kernel: [    4.297219] usb 1-1.1.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
Jan  1 00:00:04 par kernel: [    4.297242] usb 1-1.1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:04 par kernel: [    4.297256] usb 1-1.1.4: Product: USB 2.0 Hub
Jan  1 00:00:04 par kernel: [    4.298701] hub 1-1.1.4:1.0: USB hub found
Jan  1 00:00:04 par kernel: [    4.298794] hub 1-1.1.4:1.0: 4 ports detected
Jan  1 00:00:04 par kernel: [    4.377284] usb 1-1.4: reset high-speed USB device number 5 using xhci_hcd
Jan  1 00:00:04 par kernel: [    4.491045] r8152 1-1.4:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2
Jan  1 00:00:04 par kernel: [    4.491074] r8152 1-1.4:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2)
Jan  1 00:00:04 par kernel: [    4.521643] r8152 1-1.4:1.0 eth1: v1.12.11
Jan  1 00:00:04 par rsyslogd: [origin software="rsyslogd" swVersion="8.2010.0" x-pid="122" x-info="https://www.rsyslog.com"] start
Jan  1 00:00:04 par kernel: [    4.684700] usb 1-1.1.4.4: new high-speed USB device number 7 using xhci_hcd
Jan  1 00:00:04 par kernel: [    4.886175] usb 1-1.1.4.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=32.98
Jan  1 00:00:04 par kernel: [    4.886199] usb 1-1.1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 00:00:04 par kernel: [    4.886212] usb 1-1.1.4.4: Product: USB2.0 Hub
Jan  1 00:00:04 par kernel: [    4.887885] hub 1-1.1.4.4:1.0: USB hub found
Jan  1 00:00:04 par kernel: [    4.888216] hub 1-1.1.4.4:1.0: 4 ports detected
Jan  1 00:00:05 par kernel: [    5.176687] usb 1-1.1.4.4.1: new low-speed USB device number 8 using xhci_hcd
Jan  1 00:00:05 par kernel: [    5.284480] usb 1-1.1.4.4.1: New USB device found, idVendor=0c45, idProduct=7401, bcdDevice= 0.01
Jan  1 00:00:05 par kernel: [    5.284503] usb 1-1.1.4.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 00:00:05 par kernel: [    5.284516] usb 1-1.1.4.4.1: Product: TEMPerV1.4
Jan  1 00:00:05 par kernel: [    5.284530] usb 1-1.1.4.4.1: Manufacturer: RDing
Jan  1 00:00:05 par kernel: [    5.294104] input: RDing TEMPerV1.4 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4.4/1-1.1.4.4.1/1-1.1.4.4.1:1.0/0003:0C45:7401.0001/input/input0
Jan  1 00:00:05 par kernel: [    5.353371] hid-generic 0003:0C45:7401.0001: input,hidraw0: USB HID v1.10 Keyboard [RDing TEMPerV1.4] on usb-0000:01:00.0-1.1.4.4.1/input0
Jan  1 00:00:05 par kernel: [    5.359188] hid-generic 0003:0C45:7401.0002: hiddev96,hidraw1: USB HID v1.10 Device [RDing TEMPerV1.4] on usb-0000:01:00.0-1.1.4.4.1/input1
Jan  1 00:00:39 par kernel: [   39.398223] random: crng init done
Jan  1 02:39:13 par kernel: [ 9553.789057] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Jan  1 02:39:13 par kernel: [ 9553.789800] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Jan  1 02:39:13 par kernel: [ 9553.790533] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Jan  1 02:39:13 par kernel: [ 9553.791282] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Jan  1 02:39:13 par kernel: [ 9553.833594] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 02:39:13 par kernel: [ 9553.836108] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jan  1 02:39:13 par kernel: [ 9553.836134] [vc_sm_connected_init]: start
Jan  1 02:39:13 par kernel: [ 9553.837375] [vc_sm_connected_init]: installed successfully
Jan  1 02:39:13 par kernel: [ 9553.853169] mc: Linux media interface: v0.10
Jan  1 02:39:13 par kernel: [ 9553.882568] videodev: Linux video capture interface: v2.00
Jan  1 02:39:13 par kernel: [ 9553.921536] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device
Jan  1 02:39:13 par kernel: [ 9553.925222] usbcore: registered new interface driver cdc_acm
Jan  1 02:39:13 par kernel: [ 9553.925244] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 02:39:13 par kernel: [ 9553.933609] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 02:39:13 par kernel: [ 9553.933616] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 02:39:13 par kernel: [ 9553.935469] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 02:39:13 par kernel: [ 9553.968329] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 02:39:13 par kernel: [ 9553.969838] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 02:39:13 par kernel: [ 9553.979504] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Jan  1 02:39:13 par kernel: [ 9553.989921] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Jan  1 02:39:13 par kernel: [ 9553.989987] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Jan  1 02:39:13 par kernel: [ 9553.990773] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Jan  1 02:39:13 par kernel: [ 9553.992426] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Jan  1 02:39:13 par kernel: [ 9553.993017] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Jan  1 02:39:13 par kernel: [ 9553.994105] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Jan  1 02:39:13 par kernel: [ 9553.994156] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Jan  1 02:39:13 par kernel: [ 9553.994405] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Jan  1 02:39:13 par kernel: [ 9553.994433] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Jan  1 02:39:13 par kernel: [ 9553.994453] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Jan  1 02:39:13 par kernel: [ 9553.994471] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Jan  1 02:39:13 par kernel: [ 9553.994488] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Jan  1 02:39:13 par kernel: [ 9553.994786] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Jan  1 02:39:14 par kernel: [ 9554.001139] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Jan  1 02:39:14 par kernel: [ 9554.001190] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Jan  1 02:39:14 par kernel: [ 9554.038878] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jan  1 02:39:14 par kernel: [ 9554.048016] rtc-pcf8523 1-0068: registered as rtc0
Jun 24 20:14:20 par kernel: [ 9554.051829] rtc-pcf8523 1-0068: setting system clock to 2026-06-24T20:14:20 UTC (1782332060)
Jun 24 20:14:20 par gpsd.hotplug: add /dev/ttyACM0
Jun 24 20:14:20 par gpsdctl: gpsd_control(action=add, arg=/dev/ttyACM0)
Jun 24 20:14:20 par gpsdctl: launching gpsd -n -F /run/gpsd.sock
Jun 24 20:14:20 par kernel: [ 9554.192092] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jun 24 20:14:20 par kernel: [ 9554.203068] NET: Registered protocol family 10
Jun 24 20:14:20 par gpsd[271]: gpsd:ERROR: can't bind to IPv6 port 2947, Cannot assign requested address
Jun 24 20:14:20 par kernel: [ 9554.205047] Segment Routing with IPv6
Jun 24 20:14:20 par kernel: [ 9554.238297] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jun 24 20:14:20 par kernel: [ 9554.248170] usbcore: registered new interface driver brcmfmac
Jun 24 20:14:20 par kernel: [ 9554.424889] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Jun 24 20:14:20 par kernel: [ 9554.433873] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Jun 24 20:14:20 par kernel: [ 9554.446684] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar  1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
Jun 24 20:14:20 par wpa_supplicant[313]: Successfully initialized wpa_supplicant
Jun 24 20:14:20 par kernel: [ 9554.945827] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Jun 24 20:14:20 par wpa_supplicant[317]: wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
Jun 24 20:14:20 par kernel: [ 9555.348560] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Jun 24 20:14:20 par kernel: [ 9555.349372] r8152 1-1.4:1.0 eth1: carrier on
Jun 24 20:14:21 par ifplugd(eth0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jun 24 20:14:21 par ifplugd(eth0): upping interface
Jun 24 20:14:21 par ifplugd(eth0): using SIOCETHTOOL detection mode
Jun 24 20:14:21 par ifplugd(eth0): interface exists
Jun 24 20:14:21 par ifplugd(eth0): link is down
Jun 24 20:14:21 par kernel: [ 9556.113013] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Jun 24 20:14:21 par kernel: [ 9556.113470] bcmgenet fd580000.ethernet eth0: Link is Down
Jun 24 20:14:21 par ifplugd(wlan0): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jun 24 20:14:21 par ifplugd(wlan0): using wireless extension detection mode
Jun 24 20:14:21 par ifplugd(wlan0): interface exists
Jun 24 20:14:21 par ifplugd(wlan0): link is down
Jun 24 20:14:21 par ifplugd(eth1): started: BusyBox v1.33.0 (2022-04-13 15:15:41 PDT)
Jun 24 20:14:21 par ifplugd(eth1): using SIOCETHTOOL detection mode
Jun 24 20:14:21 par ifplugd(eth1): interface exists
Jun 24 20:14:21 par ifplugd(eth1): link is up
Jun 24 20:14:21 par chronyd[408]: chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC -PRIVDROP -SCFILTER -SIGND +ASYNCDNS -NTS -SECHASH +IPV6 -DEBUG)
Jun 24 20:14:21 par gpsd[412]: gpsd:ERROR: can't bind to IPv4 port 2947, Address already in use
Jun 24 20:14:21 par gpsd[412]: gpsd:ERROR: maybe gpsd is already running!  Or systemd has the port?
Jun 24 20:14:21 par gpsd[412]: gpsd:ERROR: SER: /dev/gps0 already opened by another process
Jun 24 20:14:21 par sshd[422]: Server listening on 0.0.0.0 port 22.
Jun 24 20:14:21 par sshd[422]: Server listening on :: port 22.
Jun 24 20:14:21 par rpc.statd[436]: Version 2.3.3 starting
Jun 24 20:14:21 par sm-notify[437]: Version 2.3.3 starting
Jun 24 20:14:21 par rpc.statd[436]: Initializing NSM state
Jun 24 20:14:21 par rpc.statd[436]: Running as root.  chown /run/nfs to choose different user
Jun 24 20:14:21 par kernel: [ 9556.616909] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jun 24 20:14:23 par kernel: [ 9557.754618] NFSD: Using UMH upcall client tracking operations.
Jun 24 20:14:23 par kernel: [ 9557.754644] NFSD: starting 90-second grace period (net f0000081)
Jun 24 20:14:23 par rpc.mountd[451]: Version 2.3.3 starting
Jun 24 20:14:23 par su: + none root:news
Jun 24 20:14:23 par ifplugd(eth0): link is up
Jun 24 20:14:23 par ifplugd(eth0): executing '/etc/ifplugd/ifplugd.action eth0 up'
Jun 24 20:14:23 par kernel: [ 9558.140992] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
Jun 24 20:14:23 par kernel: [ 9558.141055] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jun 24 20:14:23 par udhcpc[506]: started, v1.33.0
Jun 24 20:14:23 par udhcpc[506]: sending discover
Jun 24 20:14:25 par : starting pid 549, tty '/dev/console': '/sbin/getty -L  console 0 vt100 '
Jun 24 20:14:26 par : starting pid 550, tty '/dev/tty1': '/sbin/getty -L  tty1 0 vt100 '
Jun 24 20:14:26 par udhcpc[506]: sending discover
Jun 24 20:14:29 par udhcpc[506]: sending discover
Jun 24 20:14:32 par udhcpc[506]: no lease, forking to background
Jun 24 20:14:32 par ifplugd(eth0): exit code: 0
Jun 24 20:14:52 par udhcpc[579]: sending discover
Jun 24 20:14:55 par udhcpc[579]: sending discover
Jun 24 20:14:57 par udhcpc[579]: sending select for 10.28.1.158
Jun 24 20:14:57 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 24 20:15:08 par chronyd[408]: Selected source GPS
Jun 24 20:15:08 par chronyd[408]: System clock wrong by 1.282783 seconds
Jun 24 20:15:09 par chronyd[408]: System clock was stepped by 1.282783 seconds
Jun 24 20:18:03 par chronyd[408]: Selected source 192.245.12.21 (pool.ntp.org)
Jun 24 21:00:01 par exchange-watchdog: Exchange flag is still current
Jun 24 21:00:01 par relay-watchdog: Relay flag is still current
Jun 24 22:00:01 par exchange-watchdog: Exchange flag is still current
Jun 24 22:00:01 par relay-watchdog: Relay flag is still current
Jun 24 23:00:01 par relay-watchdog: Relay flag is still current
Jun 24 23:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 00:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 00:00:01 par relay-watchdog: Relay flag is still current
Jun 25 01:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 01:00:01 par relay-watchdog: Relay flag is still current
Jun 25 02:00:01 par relay-watchdog: Relay flag is still current
Jun 25 02:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 02:32:21 par kernel: [32235.591739] usb 1-1.1.4.4.3: new high-speed USB device number 9 using xhci_hcd
Jun 25 02:32:22 par kernel: [32235.692103] usb 1-1.1.4.4.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=27.fb
Jun 25 02:32:22 par kernel: [32235.692126] usb 1-1.1.4.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 25 03:00:02 par exchange-watchdog: Keepalive flags found, skipping
Jun 25 03:00:02 par relay-watchdog: Relay flag is still current
Jun 25 04:00:01 par relay-watchdog: Relay flag is still current
Jun 25 04:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 25 05:00:01 par relay-watchdog: Relay flag is still current
Jun 25 05:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 25 05:16:21 par chronyd[408]: Source 198.137.202.56 replaced with 23.186.168.123 (pool.ntp.org)
Jun 25 06:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 25 06:00:01 par relay-watchdog: Relay flag is still current
Jun 25 07:00:01 par relay-watchdog: Relay flag is still current
Jun 25 07:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 25 08:00:01 par relay-watchdog: Relay flag is still current
Jun 25 08:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 25 08:14:59 par udhcpc[579]: sending renew to 10.28.1.253
Jun 25 08:14:59 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 25 08:34:58 par kernel: [53992.423195] usb 1-1.1.4.4.3: USB disconnect, device number 9
Jun 25 09:00:01 par relay-watchdog: Relay flag is still current
Jun 25 09:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 10:00:01 par relay-watchdog: Relay flag is still current
Jun 25 10:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 11:00:01 par relay-watchdog: Relay flag is still current
Jun 25 11:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 12:00:01 par relay-watchdog: Relay flag is still current
Jun 25 12:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 13:00:01 par relay-watchdog: Found stale exchange flag
Jun 25 13:00:01 par relay-watchdog: Rebooting router
Jun 25 13:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 14:00:01 par relay-watchdog: Found stale exchange flag
Jun 25 14:00:01 par relay-watchdog: Rebooting router
Jun 25 14:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 15:00:01 par relay-watchdog: Found stale exchange flag
Jun 25 15:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 15:00:01 par relay-watchdog: Rebooting router
Jun 25 16:00:01 par relay-watchdog: Found stale exchange flag
Jun 25 16:00:01 par relay-watchdog: Rebooting router
Jun 25 16:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 17:00:01 par relay-watchdog: Found stale exchange flag
Jun 25 17:00:01 par relay-watchdog: Rebooting router
Jun 25 17:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 18:00:01 par relay-watchdog: Found stale exchange flag
Jun 25 18:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 18:00:01 par relay-watchdog: Rebooting router
Jun 25 19:00:02 par exchange-watchdog: Exchange flag is still current
Jun 25 19:00:02 par relay-watchdog: Found stale exchange flag
Jun 25 19:00:02 par relay-watchdog: Rebooting router
Jun 25 20:00:02 par relay-watchdog: Found stale exchange flag
Jun 25 20:00:02 par relay-watchdog: Rebooting router
Jun 25 20:00:02 par exchange-watchdog: Exchange flag is still current
Jun 25 20:14:59 par udhcpc[579]: sending renew to 10.28.1.253
Jun 25 20:14:59 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 25 21:00:02 par exchange-watchdog: Exchange flag is still current
Jun 25 21:00:02 par relay-watchdog: Found stale exchange flag
Jun 25 21:00:02 par relay-watchdog: Rebooting router
Jun 25 22:00:01 par relay-watchdog: Found stale exchange flag
Jun 25 22:00:01 par exchange-watchdog: Exchange flag is still current
Jun 25 22:00:01 par relay-watchdog: Rebooting router
Jun 25 23:00:01 par relay-watchdog: Found stale exchange flag
Jun 25 23:00:01 par relay-watchdog: Rebooting router
Jun 25 23:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 00:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 00:00:01 par relay-watchdog: Rebooting router
Jun 26 00:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 01:00:01 par relay-watchdog: Relay flag is still current
Jun 26 01:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 02:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 02:00:01 par relay-watchdog: Relay flag is still current
Jun 26 02:32:26 par kernel: [118641.636275] usb 1-1.1.4.4.3: new high-speed USB device number 10 using xhci_hcd
Jun 26 02:32:27 par kernel: [118641.736647] usb 1-1.1.4.4.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=27.fb
Jun 26 02:32:27 par kernel: [118641.736670] usb 1-1.1.4.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 26 03:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 26 03:00:01 par relay-watchdog: Relay flag is still current
Jun 26 04:00:01 par relay-watchdog: Relay flag is still current
Jun 26 04:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 26 05:00:02 par relay-watchdog: Relay flag is still current
Jun 26 05:00:02 par exchange-watchdog: Keepalive flags found, skipping
Jun 26 06:00:01 par relay-watchdog: Relay flag is still current
Jun 26 06:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 26 07:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 26 07:00:01 par relay-watchdog: Relay flag is still current
Jun 26 08:00:01 par relay-watchdog: Relay flag is still current
Jun 26 08:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 26 08:14:59 par udhcpc[579]: sending renew to 10.28.1.253
Jun 26 08:14:59 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 26 08:34:59 par kernel: [140394.370953] usb 1-1.1.4.4.3: USB disconnect, device number 10
Jun 26 09:00:01 par relay-watchdog: Relay flag is still current
Jun 26 09:00:02 par exchange-watchdog: Exchange flag is still current
Jun 26 10:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 10:00:01 par relay-watchdog: Relay flag is still current
Jun 26 11:00:01 par relay-watchdog: Relay flag is still current
Jun 26 11:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 12:00:01 par relay-watchdog: Relay flag is still current
Jun 26 12:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 13:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 13:00:02 par exchange-watchdog: Exchange flag is still current
Jun 26 13:00:02 par relay-watchdog: Rebooting router
Jun 26 14:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 14:00:01 par relay-watchdog: Rebooting router
Jun 26 14:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 15:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 15:00:01 par relay-watchdog: Rebooting router
Jun 26 15:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 16:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 16:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 16:00:01 par relay-watchdog: Rebooting router
Jun 26 17:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 17:00:01 par relay-watchdog: Rebooting router
Jun 26 17:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 18:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 18:00:01 par relay-watchdog: Rebooting router
Jun 26 18:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 19:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 19:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 19:00:01 par relay-watchdog: Rebooting router
Jun 26 20:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 20:00:01 par relay-watchdog: Rebooting router
Jun 26 20:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 20:14:59 par udhcpc[579]: sending renew to 10.28.1.253
Jun 26 20:14:59 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 26 21:00:02 par exchange-watchdog: Exchange flag is still current
Jun 26 21:00:02 par relay-watchdog: Found stale exchange flag
Jun 26 21:00:02 par relay-watchdog: Rebooting router
Jun 26 22:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 22:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 22:00:01 par relay-watchdog: Rebooting router
Jun 26 23:00:01 par relay-watchdog: Found stale exchange flag
Jun 26 23:00:01 par exchange-watchdog: Exchange flag is still current
Jun 26 23:00:01 par relay-watchdog: Rebooting router
Jun 27 00:00:01 par relay-watchdog: Found stale exchange flag
Jun 27 00:00:01 par relay-watchdog: Rebooting router
Jun 27 00:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 01:00:02 par relay-watchdog: Relay flag is still current
Jun 27 01:00:02 par exchange-watchdog: Exchange flag is still current
Jun 27 02:00:01 par relay-watchdog: Relay flag is still current
Jun 27 02:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 02:32:26 par kernel: [205042.556788] usb 1-1.1.4.4.3: new high-speed USB device number 11 using xhci_hcd
Jun 27 02:32:26 par kernel: [205042.657174] usb 1-1.1.4.4.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=27.fb
Jun 27 02:32:26 par kernel: [205042.657196] usb 1-1.1.4.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 27 03:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 27 03:00:01 par relay-watchdog: Relay flag is still current
Jun 27 04:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 27 04:00:01 par relay-watchdog: Relay flag is still current
Jun 27 05:00:01 par relay-watchdog: Relay flag is still current
Jun 27 05:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 27 06:00:01 par relay-watchdog: Relay flag is still current
Jun 27 06:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 27 07:00:02 par exchange-watchdog: Keepalive flags found, skipping
Jun 27 07:00:02 par relay-watchdog: Relay flag is still current
Jun 27 08:00:01 par relay-watchdog: Relay flag is still current
Jun 27 08:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 27 08:14:59 par udhcpc[579]: sending renew to 10.28.1.253
Jun 27 08:14:59 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 27 08:34:59 par kernel: [226795.290241] usb 1-1.1.4.4.3: USB disconnect, device number 11
Jun 27 09:00:02 par relay-watchdog: Relay flag is still current
Jun 27 09:00:02 par exchange-watchdog: Exchange flag is still current
Jun 27 10:00:02 par relay-watchdog: Relay flag is still current
Jun 27 10:00:02 par exchange-watchdog: Exchange flag is still current
Jun 27 11:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 11:00:01 par relay-watchdog: Relay flag is still current
Jun 27 12:00:01 par relay-watchdog: Relay flag is still current
Jun 27 12:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 13:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 13:00:01 par relay-watchdog: Found stale exchange flag
Jun 27 13:00:01 par relay-watchdog: Rebooting router
Jun 27 14:00:01 par relay-watchdog: Found stale exchange flag
Jun 27 14:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 14:00:01 par relay-watchdog: Rebooting router
Jun 27 15:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 15:00:01 par relay-watchdog: Found stale exchange flag
Jun 27 15:00:01 par relay-watchdog: Rebooting router
Jun 27 16:00:01 par relay-watchdog: Found stale exchange flag
Jun 27 16:00:01 par relay-watchdog: Rebooting router
Jun 27 16:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 17:00:01 par relay-watchdog: Found stale exchange flag
Jun 27 17:00:01 par relay-watchdog: Rebooting router
Jun 27 17:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 18:00:02 par relay-watchdog: Found stale exchange flag
Jun 27 18:00:02 par relay-watchdog: Rebooting router
Jun 27 18:00:02 par exchange-watchdog: Exchange flag is still current
Jun 27 19:00:02 par relay-watchdog: Found stale exchange flag
Jun 27 19:00:02 par relay-watchdog: Rebooting router
Jun 27 19:00:02 par exchange-watchdog: Exchange flag is still current
Jun 27 20:00:01 par relay-watchdog: Found stale exchange flag
Jun 27 20:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 20:00:01 par relay-watchdog: Rebooting router
Jun 27 20:15:00 par udhcpc[579]: sending renew to 10.28.1.253
Jun 27 20:15:00 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 27 21:00:02 par relay-watchdog: Found stale exchange flag
Jun 27 21:00:02 par relay-watchdog: Rebooting router
Jun 27 21:00:02 par exchange-watchdog: Exchange flag is still current
Jun 27 22:00:01 par relay-watchdog: Found stale exchange flag
Jun 27 22:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 22:00:01 par relay-watchdog: Rebooting router
Jun 27 23:00:01 par relay-watchdog: Found stale exchange flag
Jun 27 23:00:01 par exchange-watchdog: Exchange flag is still current
Jun 27 23:00:01 par relay-watchdog: Rebooting router
Jun 28 00:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 00:00:01 par relay-watchdog: Rebooting router
Jun 28 00:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 01:00:01 par relay-watchdog: Relay flag is still current
Jun 28 01:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 02:00:01 par relay-watchdog: Relay flag is still current
Jun 28 02:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 02:32:27 par kernel: [291443.729587] usb 1-1.1.4.4.3: new high-speed USB device number 12 using xhci_hcd
Jun 28 02:32:27 par kernel: [291443.829966] usb 1-1.1.4.4.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=27.fb
Jun 28 02:32:27 par kernel: [291443.829989] usb 1-1.1.4.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 28 03:00:01 par relay-watchdog: Relay flag is still current
Jun 28 03:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 28 04:00:01 par relay-watchdog: Relay flag is still current
Jun 28 04:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 28 05:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 28 05:00:01 par relay-watchdog: Relay flag is still current
Jun 28 06:00:01 par relay-watchdog: Relay flag is still current
Jun 28 06:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 28 07:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 28 07:00:01 par relay-watchdog: Relay flag is still current
Jun 28 08:00:01 par relay-watchdog: Relay flag is still current
Jun 28 08:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 28 08:15:00 par udhcpc[579]: sending renew to 10.28.1.253
Jun 28 08:15:00 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 28 08:38:58 par kernel: [313435.345358] usb 1-1.1.4.4.3: USB disconnect, device number 12
Jun 28 09:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 09:00:01 par relay-watchdog: Relay flag is still current
Jun 28 10:00:02 par relay-watchdog: Relay flag is still current
Jun 28 10:00:02 par exchange-watchdog: Exchange flag is still current
Jun 28 11:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 11:00:01 par relay-watchdog: Relay flag is still current
Jun 28 12:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 12:00:01 par relay-watchdog: Relay flag is still current
Jun 28 13:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 13:00:01 par relay-watchdog: Rebooting router
Jun 28 13:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 14:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 14:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 14:00:01 par relay-watchdog: Rebooting router
Jun 28 15:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 15:00:01 par relay-watchdog: Rebooting router
Jun 28 15:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 16:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 16:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 16:00:01 par relay-watchdog: Rebooting router
Jun 28 17:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 17:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 17:00:01 par relay-watchdog: Rebooting router
Jun 28 18:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 18:00:01 par relay-watchdog: Rebooting router
Jun 28 18:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 19:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 19:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 19:00:01 par relay-watchdog: Rebooting router
Jun 28 20:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 20:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 20:00:01 par relay-watchdog: Rebooting router
Jun 28 20:15:00 par udhcpc[579]: sending renew to 10.28.1.253
Jun 28 20:15:00 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 28 21:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 21:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 21:00:01 par relay-watchdog: Rebooting router
Jun 28 22:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 22:00:01 par exchange-watchdog: Exchange flag is still current
Jun 28 22:00:01 par relay-watchdog: Rebooting router
Jun 28 23:00:01 par relay-watchdog: Found stale exchange flag
Jun 28 23:00:01 par relay-watchdog: Rebooting router
Jun 28 23:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 00:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 00:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 00:00:01 par relay-watchdog: Rebooting router
Jun 29 01:00:01 par relay-watchdog: Relay flag is still current
Jun 29 01:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 02:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 02:00:01 par relay-watchdog: Relay flag is still current
Jun 29 02:32:21 par kernel: [377839.523516] usb 1-1.1.4.4.3: new high-speed USB device number 13 using xhci_hcd
Jun 29 02:32:21 par kernel: [377839.623917] usb 1-1.1.4.4.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=27.fb
Jun 29 02:32:21 par kernel: [377839.623939] usb 1-1.1.4.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 29 03:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 29 03:00:01 par relay-watchdog: Relay flag is still current
Jun 29 04:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 29 04:00:01 par relay-watchdog: Relay flag is still current
Jun 29 05:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 29 05:00:01 par relay-watchdog: Relay flag is still current
Jun 29 06:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 29 06:00:01 par relay-watchdog: Relay flag is still current
Jun 29 07:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 29 07:00:01 par relay-watchdog: Relay flag is still current
Jun 29 08:00:01 par relay-watchdog: Relay flag is still current
Jun 29 08:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 29 08:15:00 par udhcpc[579]: sending renew to 10.28.1.253
Jun 29 08:15:00 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 29 08:38:58 par kernel: [399836.517141] usb 1-1.1.4.4.3: USB disconnect, device number 13
Jun 29 09:00:01 par relay-watchdog: Relay flag is still current
Jun 29 09:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 10:00:01 par relay-watchdog: Relay flag is still current
Jun 29 10:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 11:00:01 par relay-watchdog: Relay flag is still current
Jun 29 11:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 12:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 12:00:01 par relay-watchdog: Relay flag is still current
Jun 29 13:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 13:00:01 par relay-watchdog: Rebooting router
Jun 29 13:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 14:00:02 par relay-watchdog: Found stale exchange flag
Jun 29 14:00:02 par relay-watchdog: Rebooting router
Jun 29 14:00:02 par exchange-watchdog: Exchange flag is still current
Jun 29 15:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 15:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 15:00:01 par relay-watchdog: Rebooting router
Jun 29 16:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 16:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 16:00:01 par relay-watchdog: Rebooting router
Jun 29 17:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 17:00:01 par relay-watchdog: Rebooting router
Jun 29 17:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 18:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 18:00:01 par relay-watchdog: Rebooting router
Jun 29 18:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 19:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 19:00:01 par relay-watchdog: Rebooting router
Jun 29 19:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 20:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 20:00:01 par relay-watchdog: Rebooting router
Jun 29 20:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 20:15:00 par udhcpc[579]: sending renew to 10.28.1.253
Jun 29 20:15:00 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 29 21:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 21:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 21:00:01 par relay-watchdog: Rebooting router
Jun 29 22:00:01 par relay-watchdog: Found stale exchange flag
Jun 29 22:00:01 par exchange-watchdog: Exchange flag is still current
Jun 29 22:00:01 par relay-watchdog: Rebooting router
Jun 29 23:00:02 par relay-watchdog: Found stale exchange flag
Jun 29 23:00:02 par relay-watchdog: Rebooting router
Jun 29 23:00:02 par exchange-watchdog: Exchange flag is still current
Jun 30 00:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 00:00:01 par relay-watchdog: Rebooting router
Jun 30 00:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 01:00:02 par exchange-watchdog: Exchange flag is still current
Jun 30 01:00:02 par relay-watchdog: Relay flag is still current
Jun 30 02:00:01 par relay-watchdog: Relay flag is still current
Jun 30 02:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 02:32:12 par kernel: [464230.709482] usb 1-1.1.4.4.3: new high-speed USB device number 14 using xhci_hcd
Jun 30 02:32:12 par kernel: [464230.809868] usb 1-1.1.4.4.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=27.fb
Jun 30 02:32:12 par kernel: [464230.809891] usb 1-1.1.4.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jun 30 03:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 30 03:00:01 par relay-watchdog: Relay flag is still current
Jun 30 04:00:01 par relay-watchdog: Relay flag is still current
Jun 30 04:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 30 05:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 30 05:00:01 par relay-watchdog: Relay flag is still current
Jun 30 06:00:01 par relay-watchdog: Relay flag is still current
Jun 30 06:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 30 07:00:01 par relay-watchdog: Relay flag is still current
Jun 30 07:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 30 08:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jun 30 08:00:01 par relay-watchdog: Relay flag is still current
Jun 30 08:15:00 par udhcpc[579]: sending renew to 10.28.1.253
Jun 30 08:15:00 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 30 08:39:00 par kernel: [486238.967304] usb 1-1.1.4.4.3: USB disconnect, device number 14
Jun 30 09:00:01 par relay-watchdog: Relay flag is still current
Jun 30 09:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 10:00:01 par relay-watchdog: Relay flag is still current
Jun 30 10:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 11:00:01 par relay-watchdog: Relay flag is still current
Jun 30 11:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 12:00:01 par relay-watchdog: Relay flag is still current
Jun 30 12:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 13:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 13:00:01 par relay-watchdog: Rebooting router
Jun 30 13:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 14:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 14:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 14:00:01 par relay-watchdog: Rebooting router
Jun 30 15:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 15:00:01 par relay-watchdog: Rebooting router
Jun 30 15:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 16:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 16:00:01 par relay-watchdog: Rebooting router
Jun 30 16:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 17:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 17:00:01 par relay-watchdog: Rebooting router
Jun 30 17:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 18:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 18:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 18:00:01 par relay-watchdog: Rebooting router
Jun 30 19:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 19:00:01 par relay-watchdog: Rebooting router
Jun 30 19:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 20:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 20:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 20:00:01 par relay-watchdog: Rebooting router
Jun 30 20:15:01 par udhcpc[579]: sending renew to 10.28.1.253
Jun 30 20:15:01 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jun 30 21:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 21:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 21:00:01 par relay-watchdog: Rebooting router
Jun 30 22:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 22:00:01 par relay-watchdog: Rebooting router
Jun 30 22:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 23:00:01 par exchange-watchdog: Exchange flag is still current
Jun 30 23:00:01 par relay-watchdog: Found stale exchange flag
Jun 30 23:00:01 par relay-watchdog: Rebooting router
Jul  1 00:00:01 par relay-watchdog: Found stale exchange flag
Jul  1 00:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 00:00:01 par relay-watchdog: Rebooting router
Jul  1 01:00:01 par relay-watchdog: Relay flag is still current
Jul  1 01:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 02:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 02:00:02 par relay-watchdog: Relay flag is still current
Jul  1 02:32:02 par kernel: [550621.912672] usb 1-1.1.4.4.3: new high-speed USB device number 15 using xhci_hcd
Jul  1 02:32:02 par kernel: [550622.021048] usb 1-1.1.4.4.3: New USB device found, idVendor=20e7, idProduct=df3d, bcdDevice=27.fb
Jul  1 02:32:02 par kernel: [550622.021073] usb 1-1.1.4.4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul  1 03:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jul  1 03:00:01 par relay-watchdog: Relay flag is still current
Jul  1 04:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jul  1 04:00:01 par relay-watchdog: Relay flag is still current
Jul  1 05:00:01 par relay-watchdog: Relay flag is still current
Jul  1 05:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jul  1 06:00:01 par relay-watchdog: Relay flag is still current
Jul  1 06:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jul  1 07:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jul  1 07:00:01 par relay-watchdog: Relay flag is still current
Jul  1 08:00:01 par relay-watchdog: Relay flag is still current
Jul  1 08:00:01 par exchange-watchdog: Keepalive flags found, skipping
Jul  1 08:15:01 par udhcpc[579]: sending renew to 10.28.1.253
Jul  1 08:15:01 par udhcpc[579]: lease of 10.28.1.158 obtained, lease time 86400
Jul  1 08:38:59 par kernel: [572639.367366] usb 1-1.1.4.4.3: USB disconnect, device number 15
Jul  1 09:00:02 par relay-watchdog: Relay flag is still current
Jul  1 09:00:02 par exchange-watchdog: Exchange flag is still current
Jul  1 10:00:01 par relay-watchdog: Relay flag is still current
Jul  1 10:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 11:00:01 par relay-watchdog: Relay flag is still current
Jul  1 11:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 12:00:01 par relay-watchdog: Relay flag is still current
Jul  1 12:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 13:00:01 par relay-watchdog: Found stale exchange flag
Jul  1 13:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 13:00:01 par relay-watchdog: Rebooting router
Jul  1 14:00:01 par relay-watchdog: Found stale exchange flag
Jul  1 14:00:01 par relay-watchdog: Rebooting router
Jul  1 14:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 15:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 15:00:01 par relay-watchdog: Found stale exchange flag
Jul  1 15:00:01 par relay-watchdog: Rebooting router
Jul  1 16:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 16:00:01 par relay-watchdog: Found stale exchange flag
Jul  1 16:00:01 par relay-watchdog: Rebooting router
Jul  1 17:00:01 par relay-watchdog: Found stale exchange flag
Jul  1 17:00:01 par relay-watchdog: Rebooting router
Jul  1 17:00:01 par exchange-watchdog: Exchange flag is still current
Jul  1 17:35:01 par cron.flagwatchdog: Reboot system flag detected
Jul  1 17:35:01 par cron.flagwatchdog: Rebooting system
Jul  1 17:35:01 par : starting pid 28948, tty '': '/etc/init.d/rcK'
Jul  1 17:35:15 par su: + none root:news
Jul  1 17:35:40 par rpc.mountd[451]: Caught signal 15, un-registering and exiting.
Jul  1 17:35:41 par sshd[422]: Received signal 15; terminating.
Jul  1 17:35:41 par chronyd[408]: chronyd exiting
Jul  1 17:35:41 par ifplugd(eth0): exiting
Jul  1 17:35:41 par ifplugd(wlan0): exiting
Jul  1 17:35:41 par ifplugd(eth1): exiting
Jul  1 17:35:42 par wpa_supplicant[317]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Jul  1 17:35:42 par wpa_supplicant[317]: p2p-dev-wlan0: CTRL-EVENT-TERMINATING 
Jul  1 17:35:42 par wpa_supplicant[317]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
